Kodak scanmate i1120 таблица ошибок

1-2 A-61602 February 2009 Scanner components Front view Scanner cover — provides access to the internal components of the scanner. Output tray — collects the scanned documents. Output tray extension — unfold this extension when scanning documents longer than 8.5 x 11 inches (A4). Input tray — holds up to 50 documents in place. Adjusts to fit the document size. Scanner cover release button — opens the scanner cover for maintenance and clearing documents. Function window — displays 1 through 9. These numbers correspo

2-6 A-61602 February 2009 Turning on the scanner When you turn on the scanner, the green indicator on the front of the scanner will flash as the scanner goes through a series of self tests. Please wait while the operating system synchronizes the scanner with the installed software. When the installation process is complete and ready to scan, the green LED indicator light will stop flashing and a number will be displayed in the Function window. NOTE: If the LED indicator light co

OVERVIEW 1-1 INSTALLATION 2-1 SCANNING 3-1 MAINTENANCE 4-1 TROUBLESHOOTING 5-1 APPENDICES

A-61602 February 2009 1-3 Back view Power switch — turns the scanner on and off. Power port — connects the power cord to the scanner. USB port — connects the scanner to the PC. Inside view Calibration guide — for optimum image quality, keep the calibration guide clean. Pre-separation pad and rollers— provides smooth document feeding and separation of various sizes, thicknesses and textures of documents. Power switch Power port USB port Rollers Pre-separation pad Calibration guide

3-2 A-61602 February 2009 Getting your documents ready to scan 1. Standard paper size documents feed easily through the scanner. When organizing documents for scanning, stack the documents so the lead edges are aligned and centered in the input tray. This allows the feeder to introduce documents into the scanner one at a time. 2. Remove all staples and paper clips before scanning. Staples and paper clips on documents may damage the scanner and documents. 3. All inks

B-4 A-61602 February 2009 Contacting Kodak • For Information on Kodak Scanners: www.Kodak.com/go/docimaging • For U.S. Service, Repair and Technical Assistance by Telephone: 5 a.m. to 5 p.m. Monday-Friday; (800) 822-1414 (excluding Kodak holidays) • For Technical Documentation and FAQ’s available 24 hours a day: www.Kodak.com/go/disupport

4-6 A-61602 February 2009 Replacing the feed roller assembly 1. Press the release button to open the scanner cover. 2. Remove the input tray by pulling it forward and lifting it out of position. Set it aside. 3. Rotate the orange tab upward to release the feed roller assembly and lift the feed roller assembly up and out of the scanner. 4. Install the new feed roller assembly by aligning the shaft end of the assembly in position. 5. With the ora

A-61602 February 2009 4-1 4 Maintenance Contents Cleaning procedures…………………………………………………………….. 4-1 Cleaning the rollers ………………………………………………………….. 4-2 Cleaning the pre-separation pad ……………………………………….. 4-3 Cleaning the calibration area……………………………………………… 4-4 Replacement procedures……………………………………

A-61602 February 2009 3-1 3Scanning Contents Getting your scanner ready to scan…………………………………………3-1 Getting your documents ready to scan ……………………………………. 3-2 Selecting your scanning application………………………………………… 3-3 Scanning with Smart Touch ……………………………………………………3-4 Getting your scanner ready to scan 1. Be sure the scanner is on and ready to scan (green indicator light is on and constant). 2. Adjust the side guides (by sliding them in or

Page 2: Table Of Contents

Installing the scanner ……… . 5 Installing the Kodak Driver Software ……6 Assembling the scanner .

Page 4: Introduction

The TWAIN Datasource is also bundled with the scanner for all of your image processing needs. This User’s Guide provides information and procedures for the Kodak ScanMate i1120 Scanner using the TWAIN Datasource. Product features • Easy to use.

Page 5: Safety Information

USA, visit the Electronics Industry Alliance website: www.eiae.org. • The product packaging is recyclable. • The Kodak ScanMate i1120 Scanner is Energy Star compliant and is shipped from the factory with the default time set to 15 minutes. EMC statements…

Page 6: Japan

This symbol indicates that when the last user wishes to discard this product, it must be sent to appropriate facilities for recovery and recycling. Please contact your local Kodak representative or refer to www.kodak.com/go/recycle for additional information on the collection and recovery programs available for this product.

Page 7: Getting Started

— Quick Tips Guide — Miscellaneous flyers System requirements Following is the recommended system configuration to run the Kodak ScanMate i1120 Scanner. • Intel Pentium IV, 2.8 GHz processor, 512 RAM Minimum: Intel Pentium III, 1 GHz processor, 128 RAM •…

Page 8: Installing The Scanner

7. Install other supplied applications (optional). IMPORTANT: • Install the Kodak Driver Software on the host PC before you connect the scanner. • Some operating systems will only support USB 2.0, and others only support USB 1.1. For best performance, use USB 2.0 when possible.

Page 9: Installing The Kodak Driver Software

Install the driver software before connecting the scanner to your PC. Driver Software 1. Insert the Kodak ScanMate i1120 Scanner Installation CD in the CD-ROM drive. The installation program starts automatically. NOTE: If the CD does not start automatically, open the My Computer icon on your desktop.

Page 12: Assembling The Scanner

Assembling the scanner The input tray snaps into place. Attaching the input tray 1. Attach the two input tray pieces by aligning the slots and snapping them together. 2. Open the scanner cover. 3. Locate and align the four tabs on the input tray with the slots on the scanner.

Page 14: Verifying For A Usb Port

Verifying for a USB port After you install the Kodak Driver Software, check for the presence of a USB port. • Select USB Test. The USB verification tool will check your operating system and hardware capability to determine if you need to install the USB card.

Page 15: Connecting The Power Cord To The Scanner

Connecting the power When the drivers have been installed, connect the power supply and cord to the scanner power cord to the scanner. Make sure that the power outlet is located within 1.52 metres (5 feet) of the scanner and is easily accessible. 1.

Page 16: Connecting The Usb Cable

Connecting the USB IMPORTANT: If you have not installed the Kodak Driver Software, cable do that now before proceeding. The following instructions explain the connection of the USB cable between your scanner and PC. You need to identify the USB port on your PC.

Page 17: Turning On The Scanner And Finalizing Kodak Driver Software Installation

Turning on the scanner When the USB cable and power connections have been made, and the and finalizing Kodak Kodak Software Drivers have been properly installed, the installation will be complete when the scanner is turned on. Driver Software installation 1.

Page 19: Installing Application Software

During the final installation process, this screen may be displayed: 5. If the above screen is displayed, select Yes. The installation of the Kodak device driver for the scanner is complete. To test the scanner, refer to the section entitled, “Verifying your scanner installation”…

Page 20: Scanner Components

Scanner components Front view Input tray Scanner cover release button Scanner cover Function window Arrow button Output tray Start button Output tray Indicator LED light extension Input tray — holds up to 50 documents in place. Adjusts to fit the document size.

Page 22: Using The Scanner

3 Using the Scanner Turning the scanner • Press the button on the back of the scanner to turn the scanner on (I) or off (O). on and off After you turn on the scanner, wait for it to complete the self-test. When completed, the green indicator light will remain on and constant.

Page 23: Start And Stop Scanning

Start and stop Before you start scanning, make sure the scanner is on and ready for operation, which is indicated by the green indicator light being on and scanning constant. Scanning is controlled by software developed for your application. To start and stop scanning, refer to the documentation provided with your application software.

Page 24: Verifying Your Scanner Installation

Validation Tool or click the Scan Validation Tool icon. The Scan Validation Tool dialog box will be displayed. 2. Select TWAIN for the Driver Types and Kodak Scanner: i1120 as the driver. The Scan Validation Tool dialog box will be displayed.

Page 26: Viewing Test Images

The documents will be scanned and displayed in the Scan Validation Tool dialog box. NOTE: If the scanner is in power saver mode, a message will be displayed that the lamps need sufficient time to warm up. Scanning will proceed when the lamps are ready. After the images have been displayed, your scanner installation verification is completed.

Page 27: Smart Touch Functionality

Smart touch Smart touch functionality allows you to quickly and easily perform common scanning tasks. Nine different functions can be assigned and functionality performed. You can perform any of the functions by pressing the Start button on the scanner or by selecting the function from the smart touch function listing.

Page 28: Configuring Dialog Box

Administrator rights are required to change this setting. The software can be started from the Program group by selecting Start>Programs>Kodak>Document Imaging>i1120>Smart touch. The software will also start automatically if you scan documents using the Start button on the scanner.

Page 29: Scan To Settings

Scan To settings Destination — allows you to select one of the following options: • File: creates an electronic file from the scanned documents and saves it in the location specified in the Folder path. • Application: creates an electronic file from the scanned documents and launches the application program for the saved file.

Page 31: Scan As Settings

Scan As settings Settings Shortcut — displays the name of a group of scanner settings currently defined for use by the Kodak Scanner. This named group of scanner settings is called a shortcut and is described in more detail in Chapter 4.

Page 32: Configuring Function Numbers

Configuring function 1. Click the smart touch icon on the system tray to display the smart numbers touch function listing and select Configure. The Configuration dialog box will be displayed. 2. Select the Task shortcut you want to configure from the Task Shortcut drop-down list.

Page 34: Third Party Applications

Third party applications If installed, the PaperPort, OmniPage, and BizCard applications provided with the scanner can be selected as a destination for scanned documents. This allows easy access to the applications via a button press on the scanner. To configure a task shortcut to one of the application programs, just select it from the Destination list box as you would any other choice.

Page 36: Smart Touch Edit Window

Smart touch Edit window The smart touch Edit window allows you to view the scanned images before sending them to the final destination. As documents are scanned, the images will be displayed in the Edit window. From this window you can perform common editing tasks such as, rotating and deleting blank pages, etc.

Page 38: Using Function Numbers

Using function numbers When you have assigned the function numbers, they can be easily launched by using the Start button on the scanner or from the smart touch function listing. Launching from the scanner: 1. Use the arrow button to scroll through the function numbers and select the desired function.

Page 39: Image Processing

Starting the Scan 1. Select Start>Programs>Kodak>Document Imaging>Scan Validation Tool. Validation Tool 2. Select TWAIN for the Driver Type and the Kodak Scanner: i1120 as the Driver. The Scan Validation Tool dialog box will be displayed. A-61602 January 2008…

Page 40: Scan Validation Tool Dialog Box

Scan Validation Tool The Scan Validation Tool (SVT) is a diagnostic application provided by Kodak. The SVT user interface allows access to all the features of the dialog box scanner and is a good way to verify that the scanner is working properly.

Page 41: Using The Twain Datasource

Last File  displays the full path and file name for the last stored image. Using the TWAIN The Kodak ScanMate i1120 Scanner provides a wide variety of electronic images. This can be done by using the TWAIN datasource datasource Kodak provides in concert with your scanning application.

Page 42: How Do I Begin

The procedures that follow describe how to configure a customized Setting Shortcut. Complete descriptions of the features and options on the main Kodak Scanner window and tabs are found in the section entitled, “The main Kodak Scanner window”. NOTE: Setting Shortcuts can sometimes be overridden by your scanning application.

Page 43: Selecting Image Settings

Selecting Image settings From the main Kodak Scanner window: 1. Select a predefined Setting Shortcut from the Setting Shortcuts list. Choose a Setting Shortcut that describes as closely as possible the image output you desire. 2. Determine if you want to capture an electronic image of the front of…

Page 45: Selecting Device Settings

6. On each tab, select the appropriate options or action you want the scanner to perform. 7. When finished: • Click Home to return to the main Kodak Scanner window and click Save to save your selections to your custom Setting Shortcut, or •…

Page 46: The Main Kodak Scanner Window

The main Kodak The main Kodak Scanner window is the home window of the scanner’s user interface. You can scan by simply selecting a Setting Shortcut and Scanner window then selecting OK/Scan. Setting Shortcuts — provides a listing of the Setting Shortcuts currently set up.

Page 49: The Image Settings Window

The Image Settings From this window you can define image processing options by using the available tabs. The values used in Image Settings are saved in the window selected Setting Shortcut. The Image Settings window includes the following tabs: General, Size, Adjustments and Enhancements. Side —…

Page 50: Preview Area

OK/Scan — when selected, you will be prompted to save any unsaved changes. NOTE: If this button is OK, any unsaved changes will remain in effect for the current scan session. Cancel — closes the main Kodak Scanner window without saving any changes. A-61602 January 2008…

Page 51: General Tab

General tab The General tab contains the commonly used image options. In most cases, you will not have to change options on other tabs. Scan as — allows you to select the electronic image format. • Color (24-bit): produces a color version of your document. •…

Page 53: Size Tab

Size tab The Size tab allows you to define values relating to the image output (i.e., cropping values, paper size, etc.). Document — allows you to select how the scanner will detect your document as it is being fed through the scanner. •…

Page 56: Adjustments Tab: Black And White

Adjustments tab: black The options available on the Adjustments tab depend on the Scan as and white selection on the General tab. The following options are based on a Scan as selection of Black and White. Conversion quality — these settings effect how the scanner analyzes a grayscale version of the document which is used to produce the black and white electronic image.

Page 58: Adjustments Tab: Color

Adjustments tab: color The options available on the Adjustments tab depend on the Scan as or grayscale selection on the General tab. The following options are based on a Scan As selection of Color or Grayscale. Brightness — changes the amount of white in the color or grayscale image.

Page 59: Enhancements Tab

Enhancements tab The options on the Enhancements tab depend on the Scan as selection on the General tab. Image Edge Fill — fills the edges of the final electronic image by covering the area with the specified color. • Color: allows you to select the color to fill the edges with. — (none) — White — Black…

Page 61: Advanced Image Setup

Advanced Image Setup The Advanced tab The Advanced Image Setup icon is located at the top of the Image Settings window next to the Side drop-down box. When you select the Advanced Image Setup icon, the Advanced tab will be displayed. Input document is —…

Page 64: Creating Multiple Images For Each Side Of A Document, Example 1

Example 1 side of each document. 1. Select a Setting Shortcut from the main Kodak Scanner window that closely describes your desired output. 2. Select Settings to display the Image Settings window.

Page 66: Creating Different Settings For Each Side Of A Document, Example 2

Example 2 1. If you are not already on the Advanced tab: • Select a Setting Shortcut from the main Kodak Scanner window that closely describes your desired output. • Select Settings to display the Image Settings window.

Page 68: Creating A New Setting Shortcut

Creating a new 1. From the main Kodak Scanner window, select a Setting Shortcut from the list. It is recommended that you select a shortcut that most Setting Shortcut closely describes the desired image output. 2. Determine if you want to capture an electronic image of the front of your document, back of your document or both sides of your document and make the selection from the Input document is field.

Page 70: Changing Image Settings

Changing Image 1. Select a Setting Shortcut from the main Kodak Scanner window that closely describes your desired output. settings 2. Select an Input document is option from the main Kodak Scanner window. 3. Select Settings to display the Image Settings window.

Page 71: The Device Settings Window

NOTE: If this button is OK, any unsaved changes will remain in effect for the current scan session. Cancel — closes the main Kodak Scanner window without saving any changes. Information Icons About: displays the scanners’ version and copyright information.

Page 72: Device — General Tab

Device — General tab The General tab allows you to set scanner-specific transport control options. Paper Source • Document Feeder: when you are scanning documents from the input tray. Power Saver — allows you to set the amount of time the scanner has to be inactive before going into power saver mode.

Page 73: Device — Multifeed Tab

Device — Multifeed tab Multifeed detection aids in document processing by detecting documents that may go through the feeder overlapped. Multifeeds can happen due to stapled documents, adhesives on documents, or electrostatically charged documents. Length Detection — allows you to select the maximum length of the documents in your job set.

Page 74: Changing Device Settings

Changing Device 1. Select a Setting Shortcut from the main Kodak Scanner window that closely describes your desired output. settings 2. Select Settings to display the Image Settings window. 3. Select Device to display the Device Settings window. 4. Before making any adjustments, browse through the tabs on the Device Settings window to get familiar with options that are available.

Page 75: The Diagnostics Window

The Diagnostics From this window you can access the diagnostic functions of the scanner. The Diagnostics window includes the following tabs: General, window Debug and Logs. The Diagnostics window can be accessed via the Diagnostics button which is located on the General tab of the Device Settings window.

Page 76: Diagnostics — Debug Tab

Click the drop-down box to select from Off (the default), On or Custom. It is suggested that you do not use the Custom setting unless directed to do so by Kodak support personnel.

Page 77: Diagnostics — Logs Tab

Toolbar buttons Save As — saves all the logs for viewing by Kodak support personnel. When selected, you will be prompted for the location to save the logs along with the option of including any debug images.

Page 78: Maintenance

“Supplies and consumables” at the end of this chapter provides a listing of the supplies required to clean your scanner. IMPORTANT: Use only non-flammable cleaners such as those provided through Kodak Parts Services. Do not use household cleaners. Do not use cleaners in confined areas, use with adequate ventilation.

Page 79: Cleaning The Rollers

3. Wipe the NFR rollers from side to side. Rotate the NFR rollers to clean the entire surface. NOTE: For easier cleaning of the NFR rollers, you may want to order Kodak ScanMate i1120 Scanner Cleaning Swabs. For ordering information see the section entitled, “Supplies and Consumables” later in this chapter.

Page 80: Cleaning The Pre-Separation Pad

Cleaning the pre- 1. Open the scanner cover. separation pad 2. Squeeze the plastic clamps that hold the pre-separation pad in place and lift the pre-separation pad out of position. 3. Wipe the pre-separation pad from top to bottom with a roller cleaning pad.

Page 81: Cleaning The Calibration Area

Cleaning the calibration 1. Open the scanner cover. area 2. Remove dust and debris from this area by using a Staticide wipe or a small brush. Be careful not to scratch the glass (may cause image quality problems) or bend the white tabs on the front calibration guide (bending the tabs may cause paper feeding problems) when cleaning the calibration area.

Page 82: Replacement Procedures

Replacement procedures Replacing the pre- Degradation of feeder performance, multiple feeds, stoppages, etc. separation pad indicate a need to change the pre-separation pad. Certain paper types such as carbonless paper or newsprint, or failure to clean regularly, and/or use of non-recommended cleaning solvents can shorten the pre- separation pad life.

Page 83: Replacing The Feed Roller Assembly

Replacing the feed roller 1. Open the scanner cover. assembly 2. Remove the input tray by pulling it forward and lifting it out of position. Set it aside. 3. Rotate the orange tab upward to release the feed roller assembly. 4.

Page 85: Supplies And Consumables

Kodak ScanMate i1120 Scanner Cleaning Swabs 824 5862 Kodak Digital Science Roller Cleaning Pads 853 5981 Kodak Digital Science Transport Cleaning Sheets (qty 50) 169 0783 Staticide Wipes for Kodak Scanners 896 5519 NOTE: Items and catalog numbers are subject to change.

Page 86: Troubleshooting

6 Troubleshooting Occasionally you may encounter a situation with your scanner where it may not function properly. Refer to the information in this chapter to help you resolve the situation before calling Technical Support. Indicator lights and The indicator lights provide information on the current state of the scanner.

Page 87: Problem Solving

Problem solving Use the chart below as a guide to check possible solutions to problems you may encounter when using the Kodak ScanMate i1120 Scanner. Problem Possible Solution Make sure that: Scanner will not scan/feed documents • the power cord is plugged securely into the back of scanner and the wall outlet.

Page 89: Scanner Not Working

2. Click on the Hardware tab and select Device Manager. 3. From the Device Manager screen, select Imaging devices. If the Kodak ScanMate i1120 Scanner appears, with a ? before the name, you need to reinstall the driver software. A-61602 January 2008…

Page 92: Testing For A Usb Connection

Testing for a USB When the Kodak device drivers for the Kodak ScanMate i1120 Scanner connection is installed, a copy of the USB test software will also be installed. It will be located in this folder (by default) along with the Kodak Scan Validation Tool software: C:\program files\Kodak\Document Imaging\usbtst.exe…

Page 93: Usb Connection Issues

Your operating system only supports USB 1.1 There are some host PC operating systems that will not support USB 2.0, but support USB 1.1. The Kodak ScanMate i1120 Scanner is rated and designed to operate with USB 2.0, but will function in a USB 1.1 port, however, the scanner will only perform at a USB 1.1 speed.

Page 95: Appendix A Specifications

Appendix A Specifications Scanner Type/Speed Duplex color scanner with an automatic document feeder, 20 pages per minute (landscape) Scanning Technology CCD type, 600 dpi optical resolution Grayscale output bit depth is: 8 Color capture bit depth is: 24 Color output bit depth is: 24 Output Resolutions 75, 100, 150, 200, 240, 300, 400, 600 and 1200 dpi File Format Output…