Код ошибки 3 0x800700c1 system level

Error Code 0x800700c1 is usually the result of a connection issue, corrupted data, or a problem with your network. In this article, we will discuss about how to fix the Windows Update Error Code 0x800700c1 and related error, windows update errors in Windows 10/11 operating system. These steps should help with all errors and not just the ones listed. If you have reached this step and if it is not solved then it will advise you to reset the computer.

Disclaimers: 

Before you attempt to fix an issue with the windows update, we highly recommend you to take a registry backup and create a system restore point as a precaution method. In case if something goes wrong, we can restore your computer to the same stage and fix the issues. (In case if you not sure how to back it up, talk to an expert for assistance)

Reasons for the Error Code 0x800700c1 in Windows 10/11 Update

Windows Update Error Code 0x800700c1 happen when there is

• Internet connectivity issue and 
• Temp store file location contains active malware

Windows 10 Update Error Code 0x800700c1 Support

Downloading Windows updates should be set on to update automatically but this does come with its own problems. One of them being if you are a person that uses a pre-paid data service it could use up all your data and you will probably be unaware that it is happening. Generally, Windows updates use a lot of data and if there is a problem with the particular network that you are using it could have problems due to the length of time it takes and if it is a poor network the interruptions could cause errors with the update.

The Solution Applies to the Following Versions of Microsoft Windows

• Windows 7, 8, 8.1
• Windows 10, 11

Steps to fix error code 0x800700c1 on Windows 10/11

• Check for Internet Connectivity, Since this update error is related to Network and malware issue, you can try checking the Internet connection
• If it’s reliably fast and quick, you should resolve the errors when the network issue is gone
  • It means that your Windows 10 system is clean
• Clear the temporary files and other cache on your computer using any tool or manual commands
  • You can do it very quickly with a tool like CCleaner

If any malware is there, you can also use Malware bytes, which is a free tool for personal use. It can be run efficiently and check for other hidden malware not found by the traditional anti-virus tools. After the restoration of the Internet Connection, check for this Windows Update installer error.

How to use Windows Update Troubleshooter?

An easy, simple click can solve the Windows 11 Update Error 0x800700c1. For this purpose, you can make use of the default troubleshooter. The below steps are shown for 20H2 update. It works even for 2004 or 1909 updates. Only the interface may change. 

1. Press Win + I keys together to open Settings
2. Click on Update & Security > Troubleshoot
3. There are few options where you can tell how Troubleshooter should behave here
4. For example, you can choose the option that says, “Ask me before running troubleshooters”
5. Click on “Additional troubleshooters” below
   
6. Click on “Windows Update” troubleshooter
7. Then, click on “Run the troubleshooter”
8. It will automatically run checking the relevant processes. Let it finish

Finally, you should see no error message. Restart the computer. Then recheck the Windows 10 Update.

Rename software distribution folder to fix windows 11 update error code 0x800700c1

This folder exists on Windows OS. To temporarily store files related to the Windows Update installation, this folder has its use. Even the Windows Update History files exist here. 

1. So if this gets corrupt, the above error code can be displayed
2. To do the above task, you need to stop some services and rename the above folder
3. Run command prompt in elevated mode (start – type “cmd” – right click on command prompt app and select “run as administrator“)
4. Type “net stop wuauserv“
   
5. Type “net stop bits“
6. Open the folder “c:\windows” and locate SoftwareDistribution folder, rename or delete as you please or if you want to keep using command prompt simply type “ren c:\windows\softwaredistribution softwaredistribution.old“

Windows 10 Update from Media Creation Tool

Sometimes the in-built Update check tool may not work. In that case, go to the following link – You could see the latest update for Windows 10. For example, on my computer, it shows it as “Windows 10 October 2020 Update”. Click on “Update Now” below that message.

It will ask for some permissions. Leave the default ones if you don’t want to change any settings or files. Then this Microsoft software tool will automatically download the relevant updates and install them.

Check these Windows Services

Another common culprit for Windows 10 update error is 0x800700c1 is some services becoming corrupt. You either need to restart them or stop them and start again.

Some of these update services are 

• Background Intelligent Transfer Service
• Cryptographic Services
• Windows Update
• Windows Update Medic Service
• Remote Procedure Call (RPC) Services

Press the Win + R keys together and enter “services. msc” to open the Services window. Otherwise, you can open them from Task Manager also. Another option is to search “Services” in the Windows Search box.

• Right-click the appropriate service and click on “Restart” for the above services
• Could you do it for each service? Otherwise, you can click on “Stop”.  It will stop the service temporarily
• Then you can start again. If any of them are under the “Manual” startup type, you can double-click that service
• Either make it “Automatic” or “Automatic (Delayed)” . Then restart the computer and check if these services are running

More Steps to fix the Troubleshooting Windows Update Error 0x800700c1

Update outdated drivers in Windows

Windows allows manually updated the divers. In case Windows 10 automatically download the new drivers or you install the new drivers from the downloaded manufacture’s website.

• Open the system and go to the start menu
• Then enter the control panel from the search box and open it
• Here we go to click on system and security after that go to click on system
• Then open the new window and go to click on advanced system settings
• Then open the system properties window and open the hardware and go to click on device installation setting
• Finally, open the new window and click on related option and press save changes

If you choose the former, Windows will automatically install the driver and ask you to reboot the computer afterward. The latter allows you to update the driver with the driver file that you have downloaded. This step should fix windows update error 0x800700c1 and related errors.

Reinstall Windows Update

1. Open the Run Window through the Windows key+R
2. Then enter the services.msc in the command box and press ok
3. Right-click Windows Update in the Services management console, and then select Stop. If you are running Windows, right-click Automatic Updates, and then select Stop
4. After Windows Update stops, right-click Windows Update, and then select Start. If you are running Windows, right-click Automatic Updates, and then select Start

Check corrupted system files to fix error code 0x800700c1

1. Go to the Windows key+R and click it
2. Then open the Run Window and enter the cmd in a search box after that press ok
3. Then open the command prompt and type the command SFC/Scan now in the command prompt and press enter

   

4. The system will take some time to check. Let it run for a while. If it finds any issues in “OS” integrity it will automatically fix it.

Disable Windows Firewall temporarily

• Open the system and go to the start menu
• After that enter, the firewall in the search box then left click on the Windows firewall in control panel.
• Then click Turn on Windows Firewall on or off.

• Open both firewalls like private and public
• Then set both firewalls to turn off and press ok
• After that go to the start menu and enter the cmd in the search box.
• Then right-click on the cmd and select the Run as administrator and press yes
• Finally, some commands are entered in the command prompt and press enter

regsvr32 wuapi.dll
Next: regsvr32 wuaueng.dll
regsvr32 wucltui.dll

Then finally Re-enable your firewall is on.

We can also set up free tools meant for Microsoft Windows versions and train you on how to use them to maintain the health of your computers. You will also get support for Microsoft Windows restore points. That is helpful to use when the system having any issues to restore back to the earlier point.

Chat with our Technician to fix your computer issues Now. If the issue still persists, please initiate the chat, One of our Certified Microsoft technicians will help you. If you are having issues with upgrading/updating the operating system/office products on your computer please reach us on chat. We provide support for Microsoft products like Windows, Office and Outlook.

You can also visit our website for more details and information. Our experts provide the best solutions to resolve the error code issue and fix them completely. 

The update error 0x800700c1 occurs when your system downloads the required update files but fails to install them. There is likely corrupted data in the update files, or the Windows services that help in this installation are not running.

However, this issue is easy to manage. Troubleshooting Windows Update or resetting the Update Components will fix this issue in most cases. Worst case, you’ll have to reset your PC or make a clean install, which is still not that bad of a solution.

What Causes Error 0x800700c1

The first thing you can do is to reboot your PC. If you have a habit of hibernating your PC instead of a proper shutdown, your system won’t apply any installed updates. It can possibly cause many update errors. So, properly restart or shut down and turn on your PC.

Also, make sure to check your internet connection as any connectivity issues may also cause this error.

Then, move on to the solutions below if the issue remains unresolved.

Windows Update Troubleshooter

Windows includes an Update Troubleshooter that checks and fixes most update errors. It is better to launch this feature before trying any advanced solutions. Here’s how you can use this Troubleshooter to fix update errors:

1. Launch Settings (press Windows + I) and click on Update & Security.
   
2. Select Troubleshooter from the left sidebar.
3. If you see the troubleshooting options, scroll down and click on Windows Update Troubleshooter.
4. If not, select Additional troubleshooters. Then, search for and click on Windows Update.
   
5. Hit Run the troubleshooter.

If the Troubleshooter from your system fails to solve this issue, you can try out this Windows Update Troubleshooter for Windows 10.

Repair System File Corruption

You can solve many system issues, including update errors, by simply repairing system file corruption. Please use the System File Checker (SFC) and the Deployment Image Servicing and Management (DISM) for this task. Follow the directions below to do so:

1. Search for Command Prompt in the search bar. Then, right-click on it and select Run as administrator.
2. Paste the commands below and press enter after each to execute them.
   dism /online /cleanup-image /restorehealth
sfc /scannow

Finally, reboot your PC and check if the error persists. If it does, try running these commands in safe mode. To boot your PC in safe mode,

1. Go to Start > Power.
2. Click Restart while pressing the Shift key. It will direct you to Windows Recovery Environment.
   
3. Go to Troubleshoot > Advanced options > Startup Settings > Restart.
   
4. Press 4 or F4 to boot in safe mode.

Then, follow the above steps to run DISM and SFC.

Reset Windows Update Components

This is the most common solution for several Windows Update errors. In this method, we perform the following processes:

• Resetting Windows Update services.
• Deleting the files downloaded for the update.
• Restoring Windows Update cache files.
• Registering some Windows Update libraries

Here’s the step-by-step method to execute these processes:

1. First, click on the Wi-Fi icon on the notification bar and select Airplane Mode.
2. Then, launch Command Prompt as Administrator.
3. Type the following commands and press Enter after each to execute them:

net stop bits
net stop wuauserv
net stop cryptsvc
net stop msiserver
net stop appidsvc
del "%ALLUSERSPROFILE%\Application Data\Microsoft\Network\Downloader\qmgr*.dat"
ren C:\Windows\SoftwareDistribution SoftwareDistribution.bak
ren C:\Windows\System32\catroot2 catroot2.bak
regsvr32 /s wuapi.dll
regsvr32 /s wuaueng.dll
regsvr32 /s wucltui.dll
netsh winsock reset
net start bits
net start wuauserv
net start appidsvc
net start cryptsvc
net start msiserver

For more information, please browse through the Microsoft documentation for resetting Windows Update components.

Scan for Malware

A few malware programs exist that prevent the system from accessing update services. We recommend using reliable antivirus programs and enabling real-time protection to prevent such issues. 

Please scan your computer if you encounter this error. The method differs between different antivirus software. It’s also best to enable cloud-based protection on your antivirus programs.

To scan your computer with the Virus & Threat Protection,

1. Click on the Windows Security icon (Shield icon) from the notification tray.
2. Click the triple-lines and select Virus & threat protection.
   
3. Click on Scan options under Current threats.
   
4. Check on Full scan and click Scan now.
   
5. Wait for the process to complete. It will take a while.

Temporarily Disable Third-Party Antivirus & Firewall

You can try temporarily disabling any third-party antivirus or firewall when you encounter this error. Some antivirus programs may stop installing updates if they falsely recognize them as threats to your system.

Install Update With Media Creation

Microsoft regularly updates the Windows installation media, so you can use this to install the updates on your PC manually. This method may also repair your system, thereby, fixing any precious errors.

You can also use the Windows Update Assistant as an alternative way to install updates. However, it might not fix the update error.

To install the update with media creation,

1. Go to the Microsoft download website and click on your Windows version.
2. Under Create Windows 10 installation media, click on Download tool now.
3. Launch the installation file.
4. Select Accept to agree with the License terms.
5. Then, choose Upgrade this PC now and click Next.
   
6. Follow the on-screen instructions.

Perform System Restore

System Restore allows you to revert to a previously created restore point. Any errors encountered after the restore point will likely be resolved after performing a system restore.

Follow the steps below to perform a system restore:

1. Type systempropertiesprotection in the Run command and press Enter. It opens the System Protection tab in System Properties.
2. Click on System Restore to initiate the process.
   
3. Follow the on-screen instructions. You can select any restore point you want. 
4. There is also an option to check for affected programs. You’ll need to reinstall them after executing the system restore.

Reset Your PC

If you don’t have an appropriate restore point or all previous methods prove ineffective, the last option is to reset your OS.

We recommend you backup all your necessary files before resetting your PC. Follow these instructions to perform a system reset:

1. Launch Settings and go to Update and Security. 
2. Select Recovery from the left sidebar.
3. Under Reset this PC, click on Get started.
   
4. Choose Keep my files when prompted and click Ok.
   
5. Follow the on-screen instructions.

It’s best to delete your old partition and perform a clean install of Windows if the error still reoccurs.

Related Questions

Running SFC Displayed Windows Resource Protection Could Not Perform the Requested Operation.

This error occurs due to problems with Windows Module Installer. We have a dedicated article that tackles this issue. Please visit it to resolve the issue.

There may also be cases when Windows Resource Protection found problems with integrity of system files but couldn’t fix them. We also have a detailed article on this particular issue: Windows Resource Protection Found Corrupt Files.