Код ошибки 0x3000008 расширенный код ошибки 0x0

Code	Reason
0	No error
1	User-initiated client disconnect.
2	User-initiated client logoff.
3	Your Remote Desktop Services session has ended, possibly for one of the following reasons: The administrator has ended the session. An error occurred while the connection was being established. A network problem occurred. For help solving the problem, see «Remote Desktop» in Help and Support.
260	Remote Desktop can’t find the computer «». This might mean that «» does not belong to the specified network. Verify the computer name and domain that you are trying to connect to.
262	This computer can’t connect to the remote computer. Your computer does not have enough virtual memory available. Close your other programs, and then try connecting again. If the problem continues, contact your network administrator or technical support.
264	This computer can’t connect to the remote computer. The two computers couldn’t connect in the amount of time allotted. Try connecting again. If the problem continues, contact your network administrator or technical support.
266	The smart card service is not running. Please start the smart card service and try again.
516	Remote Desktop can’t connect to the remote computer for one of these reasons: 1) Remote access to the server is not enabled 2) The remote computer is turned off 3) The remote computer is not available on the network Make sure the remote computer is turned on and connected to the network, and that remote access is enabled.
522	A smart card reader was not detected. Please attach a smart card reader and try again.
772	This computer can’t connect to the remote computer. The connection was lost due to a network error. Try connecting again. If the problem continues, contact your network administrator or technical support.
778	There is no card inserted in the smart card reader. Please insert your smart card and try again.
1030	Because of a security error, the client could not connect to the remote computer. Verify that you are logged on to the network, and then try connecting again.
1032	The specified computer name contains invalid characters. Please verify the name and try again.
1034	An error has occurred in the smart card subsystem. Please contact your helpdesk about this error.
1796	This computer can’t connect to the remote computer. Try connecting again. If the problem continues, contact the owner of the remote computer or your network administrator.
1800	Your computer could not connect to another console session on the remote computer because you already have a console session in progress.
2056	The remote computer disconnected the session because of an error in the licensing protocol. Please try connecting to the remote computer again or contact your server administrator.
2308	Your Remote Desktop Services session has ended. The connection to the remote computer was lost, possibly due to network connectivity problems. Try connecting to the remote computer again. If the problem continues, contact your network administrator or technical support.
2311	The connection has been terminated because an unexpected server authentication certificate was received from the remote computer. Try connecting again. If the problem continues, contact the owner of the remote computer or your network administrator.
2312	A licensing error occurred while the client was attempting to connect (Licensing timed out). Please try connecting to the remote computer again.
2567	The specified username does not exist. Verify the username and try logging in again. If the problem continues, contact your system administrator or technical support.
2820	This computer can’t connect to the remote computer. An error occurred that prevented the connection. Try connecting again. If the problem continues, contact the owner of the remote computer or your network administrator.
2822	Because of an error in data encryption, this session will end. Please try connecting to the remote computer again.
2823	The user account is currently disabled and cannot be used. For assistance, contact your system administrator or technical support.
2825	The remote computer requires Network Level Authentication, which your computer does not support. For assistance, contact your system administrator or technical support.
3079	A user account restriction (for example, a time-of-day restriction) is preventing you from logging on. For assistance, contact your system administrator or technical support.
3080	The remote session was disconnected because of a decompression failure at the client side. Please try connecting to the remote computer again.
3335	As a security precaution, the user account has been locked because there were too many logon attempts or password change attempts. Wait a while before trying again, or contact your system administrator or technical support.
3337	The security policy of your computer requires you to type a password on the Windows Security dialog box. However, the remote computer you want to connect to cannot recognize credentials supplied using the Windows Security dialog box. For assistance, contact your system administrator or technical support.
3590	The client can’t connect because it doesn’t support FIPS encryption level. Please lower the server side required security level Policy, or contact your network administrator for assistance
3591	This user account has expired. For assistance, contact your system administrator or technical support.
3592	Failed to reconnect to your remote session. Please try to connect again.
3593	The remote PC doesn’t support Restricted Administration mode.
3847	This user account’s password has expired. The password must change in order to logon. Please update the password or contact your system administrator or technical support.
3848	A connection will not be made because credentials may not be sent to the remote computer. For assistance, contact your system administrator.
4103	The system administrator has restricted the times during which you may log in. Try logging in later. If the problem continues, contact your system administrator or technical support.
4104	The remote session was disconnected because your computer is running low on video resources. Close your other programs, and then try connecting again. If the problem continues, contact your network administrator or technical support.
4359	The system administrator has limited the computers you can log on with. Try logging on at a different computer. If the problem continues, contact your system administrator or technical support.
4615	You must change your password before logging on the first time. Please update your password or contact your system administrator or technical support.
4871	The system administrator has restricted the types of logon (network or interactive) that you may use. For assistance, contact your system administrator or technical support.
5127	The Kerberos sub-protocol User2User is required. For assistance, contact your system administrator or technical support.
6919	Remote Desktop cannot connect to the remote computer because the authentication certificate received from the remote computer is expired or invalid. In some cases, this error might also be caused by a large time discrepancy between the client and server computers.
7431	Remote Desktop cannot verify the identity of the remote computer because there is a time or date difference between your computer and the remote computer. Make sure your computer’s clock is set to the correct time, and then try connecting again. If the problem occurs again, contact your network administrator or the owner of the remote computer.
8711	Your computer can’t connect to the remote computer because your smart card is locked out. Contact your network administrator about unlocking your smart card or resetting your PIN.
9479	Could not auto-reconnect to your applications,please re-launch your applications
9732	Client and server versions do not match. Please upgrade your client software and then try connecting again.
33554433	Failed to reconnect to the remote program. Please restart the remote program.
33554434	The remote computer does not support RemoteApp. For assistance, contact your system administrator.
50331649	Your computer can’t connect to the remote computer because the username or password is not valid. Type a valid user name and password.
50331650	Your computer can’t connect to the remote computer because it can’t verify the certificate revocation list. Contact your network administrator for assistance.
50331651	Your computer can’t connect to the remote computer due to one of the following reasons: 1) The requested Remote Desktop Gateway server address and the server SSL certificate subject name do not match. 2) The certificate is expired or revoked. 3) The certificate root authority does not trust the certificate. Contact your network administrator for assistance.
50331652	Your computer can’t connect to the remote computer because the SSL certificate was revoked by the certification authority. Contact your network administrator for assistance.
50331653	This computer can’t verify the identity of the RD Gateway «». It’s not safe to connect to servers that can’t be identified. Contact your network administrator for assistance.
50331654	Your computer can’t connect to the remote computer because the Remote Desktop Gateway server address requested and the certificate subject name do not match. Contact your network administrator for assistance.
50331655	Your computer can’t connect to the remote computer because the Remote Desktop Gateway server’s certificate has expired or has been revoked. Contact your network administrator for assistance.
50331656	Your computer can’t connect to the remote computer because an error occurred on the remote computer that you want to connect to. Contact your network administrator for assistance.
50331657	An error occurred while sending data to the Remote Desktop Gateway server. The server is temporarily unavailable or a network connection is down. Try again later, or contact your network administrator for assistance.
50331658	An error occurred while receiving data from the Remote Desktop Gateway server. Either the server is temporarily unavailable or a network connection is down. Try again later, or contact your network administrator for assistance.
50331659	Your computer can’t connect to the remote computer because an alternate logon method is required. Contact your network administrator for assistance.
50331660	Your computer can’t connect to the remote computer because the Remote Desktop Gateway server address is unreachable or incorrect. Type a valid Remote Desktop Gateway server address.
50331661	Your computer can’t connect to the remote computer because the Remote Desktop Gateway server is temporarily unavailable. Try reconnecting later or contact your network administrator for assistance.
50331662	Your computer can’t connect to the remote computer because the Remote Desktop Services client component is missing or is an incorrect version. Verify that setup was completed successfully, and then try reconnecting later.
50331663	Your computer can’t connect to the remote computer because the Remote Desktop Gateway server is running low on server resources and is temporarily unavailable. Try reconnecting later or contact your network administrator for assistance.
50331664	Your computer can’t connect to the remote computer because an incorrect version of rpcrt4.dll has been detected. Verify that all components for Remote Desktop Gateway client were installed correctly.
50331665	Your computer can’t connect to the remote computer because no smart card service is installed. Install a smart card service and then try again, or contact your network administrator for assistance.
50331666	Your computer can’t stay connected to the remote computer because the smart card has been removed. Try again using a valid smart card, or contact your network administrator for assistance.
50331667	Your computer can’t connect to the remote computer because no smart card is available. Try again using a smart card.
50331668	Your computer can’t stay connected to the remote computer because the smart card has been removed. Reinsert the smart card and then try again.
50331669	Your computer can’t connect to the remote computer because the user name or password is not valid. Please type a valid user name and password.
50331671	Your computer can’t connect to the remote computer because a security package error occurred in the transport layer. Retry the connection or contact your network administrator for assistance.
50331672	The Remote Desktop Gateway server has ended the connection. Try reconnecting later or contact your network administrator for assistance.
50331673	The Remote Desktop Gateway server administrator has ended the connection. Try reconnecting later or contact your network administrator for assistance.
50331674	Your computer can’t connect to the remote computer due to one of the following reasons: 1) Your credentials (the combination of user name, domain, and password) were incorrect. 2) Your smart card was not recognized.
50331675	Remote Desktop can’t connect to the remote computer «» for one of these reasons: 1) Your user account is not listed in the RD Gateway’s permission list 2) You might have specified the remote computer in NetBIOS format (for example, computer1), but the RD Gateway is expecting an FQDN or IP address format (for example, computer1.fabrikam.com or 157.60.0.1). Contact your network administrator for assistance.
50331676	Remote Desktop can’t connect to the remote computer «» for one of these reasons: 1) Your user account is not authorized to access the RD Gateway «» 2) Your computer is not authorized to access the RD Gateway «» 3) You are using an incompatible authentication method (for example, the RD Gateway might be expecting a smart card but you provided a password) Contact your network administrator for assistance.
50331679	Your computer can’t connect to the remote computer because your network administrator has restricted access to this RD Gateway server. Contact your network administrator for assistance.
50331680	Your computer can’t connect to the remote computer because the web proxy server requires authentication. To allow unauthenticated traffic to an RD Gateway server through your web proxy server, contact your network administrator.
50331681	Your computer can’t connect to the remote computer because your password has expired or you must change the password. Please change the password or contact your network administrator or technical support for assistance.
50331682	Your computer can’t connect to the remote computer because the Remote Desktop Gateway server reached its maximum allowed connections. Try reconnecting later or contact your network administrator for assistance.
50331683	Your computer can’t connect to the remote computer because the Remote Desktop Gateway server does not support the request. Contact your network administrator for assistance.
50331684	Your computer can’t connect to the remote computer because the client does not support one of the Remote Desktop Gateway’s capabilities. Contact your network administrator for assistance.
50331685	Your computer can’t connect to the remote computer because the Remote Desktop Gateway server and this computer are incompatible. Contact your network administrator for assistance.
50331686	Your computer can’t connect to the remote computer because the credentials used are not valid. Insert a valid smart card and type a PIN or password, and then try connecting again.
50331687	Your computer can’t connect to the remote computer because your computer or device did not pass the Network Access Protection requirements set by your network administrator. Contact your network administrator for assistance.
50331688	Your computer can’t connect to the remote computer because no certificate was configured to use at the Remote Desktop Gateway server. Contact your network administrator for assistance.
50331689	Your computer can’t connect to the remote computer because the RD Gateway server that you are trying to connect to is not allowed by your computer administrator. If you are the administrator, add this Remote Desktop Gateway server name to the trusted Remote Desktop Gateway server list on your computer and then try connecting again.
50331690	Your computer can’t connect to the remote computer because your computer or device did not meet the Network Access Protection requirements set by your network administrator, for one of the following reasons: 1) The Remote Desktop Gateway server name and the server’s public key certificate subject name do not match. 2) The certificate has expired or has been revoked. 3) The certificate root authority does not trust the certificate. 4) The certificate key extension does not support encryption. 5) Your computer cannot verify the certificate revocation list. Contact your network administrator for assistance.
50331691	Your computer can’t connect to the remote computer because a user name and password are required to authenticate to the Remote Desktop Gateway server instead of smart card credentials.
50331692	Your computer can’t connect to the remote computer because smart card credentials are required to authenticate to the Remote Desktop Gateway server instead of a user name and password.
50331693	Your computer can’t connect to the remote computer because no smart card reader is detected. Connect a smart card reader and then try again, or contact your network administrator for assistance.
50331695	Your computer can’t connect to the remote computer because authentication to the firewall failed due to missing firewall credentials. To resolve the issue, go to the firewall website that your network administrator recommends, and then try the connection again, or contact your network administrator for assistance.
50331696	Your computer can’t connect to the remote computer because authentication to the firewall failed due to invalid firewall credentials. To resolve the issue, go to the firewall website that your network administrator recommends, and then try the connection again, or contact your network administrator for assistance.
50331698	Your Remote Desktop Services session ended because the remote computer didn’t receive any input from you.
50331699	The connection has been disconnected because the session timeout limit was reached.
50331700	Your computer can’t connect to the remote computer because an invalid cookie was sent to the Remote Desktop Gateway server. Contact your network administrator for assistance.
50331701	Your computer can’t connect to the remote computer because the cookie was rejected by the Remote Desktop Gateway server. Contact your network administrator for assistance.
50331703	Your computer can’t connect to the remote computer because the Remote Desktop Gateway server is expecting an authentication method different from the one attempted. Contact your network administrator for assistance.
50331704	The RD Gateway connection ended because periodic user authentication failed. Try reconnecting with a correct user name and password. If the reconnection fails, contact your network administrator for further assistance.
50331705	The RD Gateway connection ended because periodic user authorization failed. Try reconnecting with a correct user name and password. If the reconnection fails, contact your network administrator for further assistance.
50331707	Your computer can’t connect to the remote computer because the Remote Desktop Gateway and the remote computer are unable to exchange policies. This could happen due to one of the following reasons: 1. The remote computer is not capable of exchanging policies with the Remote Desktop Gateway. 2. The remote computer’s configuration does not permit a new connection. 3. The connection between the Remote Desktop Gateway and the remote computer ended. Contact your network administrator for assistance.
50331708	Your computer can’t connect to the remote computer, possibly because the smart card is not valid, the smart card certificate was not found in the certificate store, or the Certificate Propagation service is not running. Contact your network administrator for assistance.
50331709	To use this program or computer, first log on to the following website: <a href=»»></a>.
50331710	To use this program or computer, you must first log on to an authentication website. Contact your network administrator for assistance.
50331711	Your session has ended. To continue using the program or computer, first log on to the following website: <a href=»»></a>.
50331712	Your session has ended. To continue using the program or computer, you must first log on to an authentication website. Contact your network administrator for assistance.
50331713	The RD Gateway connection ended because periodic user authorization failed. Your computer or device didn’t pass the Network Access Protection (NAP) requirements set by your network administrator. Contact your network administrator for assistance.
50331714	Your computer can’t connect to the remote computer because the size of the cookie exceeded the supported size. Contact your network administrator for assistance.
50331716	Your computer can’t connect to the remote computer using the specified forward proxy configuration. Contact your network administrator for assistance.
50331717	This computer cannot connect to the remote resource because you do not have permission to this resource. Contact your network administrator for assistance.
50331718	There are currently no resources available to connect to. Retry the connection or contact your network administrator.
50331719	An error occurred while Remote Desktop Connection was accessing this resource. Retry the connection or contact your system administrator.
50331721	Your Remote Desktop Client needs to be updated to the newest version. Contact your system administrator for help installing the update, and then try again.
50331722	Your network configuration doesn’t allow the necessary HTTPS ports. Contact your network administrator for help allowing those ports or disabling the web proxy, and then try connecting again.
50331723	We’re setting up more resources, and it might take a few minutes. Please try again later.
50331724	The user name you entered does not match the user name used to subscribe to your applications. If you wish to sign in as a different user please choose Sign Out from the Home menu.
50331725	Looks like there are too many users trying out the Azure RemoteApp service at the moment. Please wait a few minutes and then try again.
50331726	Maximum user limit has been reached. Please contact your administrator for further assistance.
50331727	Your trial period for Azure RemoteApp has expired. Ask your admin or tech support for help.
50331728	You no longer have access to Azure RemoteApp. Ask your admin or tech support for help.

Главная » Грабли » Маленькая, но злая ошибка с публикацией RD Gateway

При публикации RD Gateway с помощью IIS ARR можно столкнуться с одной маленькой, но очень досадной ошибкой. При попытке запустить опубликованный remoteapp на смартфоне (проявляется и на Windows Phone, и на Android, и на iOS) или, например, на Mac OS X, пользователь получит ошибку 0x03000008 и предложением обратиться к администратору 🙂

Причины могут быть разными, например:

• https://blog.thesysadmins.co.uk/remote-desktop-ios-8-1-0-error-0x03000008.html — настройки политики для NPS;
• https://social.technet.microsoft.com/Forums/office/en-US/02177dba-e8ff-4043-a287-1c6327370b7f/ipad-remote-problem-error-code-0x03000008?forum=winRDc — ошибки клиента.

Однако есть еще одна небольшая тонкость. Если RD Gateway опубликован через IIS ARR, то в правиле публикации необходимо указать тип сопоставления шаблона как «Regular expression», а не «Wildcard» для случая, когда правило задается с шаблоном «.*» и фильтрацией по значению HTTP_HOST. В противном случае можно получить ту самую ошибку 0x03000008.

Если рассмотреть внимательно трассировку («Failed Request Tracing») для публикации с wildcard, можно заметить, что некоторые запросы на rpcproxy не подпадают под шаблон правила и локальный IIS пытается обрабатывать их самостоятельно, естественно выдавая в ответ 404.

Пример такой ситуации:

После перевода правила на использование регулярных вырожений публикация начинает работать корректно.

Пример рабочего правила:

P.S. Естественно, самое главное не забывать, что для регулярных выражений шаблон, отвечающий любому числу любых символов не «*», а «.*» (точка — любой символ, * — любое количество).

Issue

In a recent update to the iOS Remote Desktop client (8.1.0 and above) you receive the following error when connecting using a Remote Desktop Gateway: Can’t connect to the Remote Desktop Gateway. Contact your network administrator for assistance. (Error code: 0x03000008)

Confirmed on the Remote Desktop Services blog here.

Fix

1. Review the TerminalServices-Gateway operational event log on the Remote Desktop Gateway server and look for EventID 301 which states: The user “DOMAINuser”, on client computer “1.2.3.4”, did not meet resource authorization policy requirements and was therefore not authorized to resource “172.17.50.10”. The following error occurred: “23002”.

The resource IP should be one of your RDS servers, note healthy connections to the Gateway should (typically) specify the FQDN of the RDS server it is trying to connect to: The user “Domainuser”, on client computer “1.2.3.4”, met resource authorization policy requirements and was therefore authorized to connect to resource “RDS-NY-2.domain.co.uk“.

2. Open the RD Gateway Manager MMC on your Gateway server, go to Policies, Resource Authorization Policies (RAP) and review the policy you have configured for your company- note the locally stored computer group used.

3. Choose Manage locally stored computer groups from the right hand side, select the group used in the policy and select properties.

4. Add the IP for each of the RDS servers in the farm (keep hostname and FQDN if present).

Once this is complete it should resolve the issue. Review the TerminalServices-Gateway operational event log and you should now see: The user “DOMAINuser”, on client computer “1.2.3.4”, met resource authorization policy requirements and was therefore authorized to connect to resource “172.17.50.10”.

This issue/bug/feature is still present in the Remote Desktop iOS application version 8.1.5 from 29th October.

Last Updated on February 14, 2023 by rudyooms

I wasn’t going to write a blog today, but after troubleshooting a weird issue, I still needed to.

This blog will be about the Remote Desktop Client and Windows 11 Insider Previews. Normally I am not blogging about Remote desktops… but this time I needed to.

I will divide this blog into multiple parts

1. The Issue
2. Troubleshooting
3. Solving it
4. The Second Issue

1. The Issue

When migrating to full cloud, sometimes you are still stuck with some old legacy apps. Like I told you in this blog, sometimes publishing an old legacy app as a Remote App for the time being could be a great option.

But today we noticed something weird.

A customer called us about a problem he experienced, so we wanted to be sure our test user was also experiencing the same issue. So we wanted to log in with our test user to check it out ourselves.

But after logging in with our credentials, we ended up with this nice remote desktop screen. It hung on the famous “Configuring Remote Session”

That’s weird because that wasn’t what the customer called us for. That’s weird. So the first place we looked was the Remote Desktop Gateway services, and they were running without any issues, people were still logged on and could still do their job.

2. Troubleshooting

The first thing I wanted to know was if it was an issue on the customer server-side or our own devices. So we did the same tests on some other environments. Almost all of them just worked!…

Luckily we also had a second Remote Desktop Gateway for the customer to test with. When googling “configuring remote session” you will end up with some advice on creating the EnforceChannelbinding

HKLM\Software\Microsoft\Windows NT\CurrentVersion\TerminalServerGateway\Config\Core

Type: REG_DWORD
Name: EnforceChannelBinding
Value: 0 (Decimal)

Or creating the registry value RDGClientTransport on the client (Use RDG-RPC instead of RDG-HTTP)

But none of them worked of course. So let’s move further. We also tested the connection from a separate Windows 11 device, that wasn’t enrolled in Azure Ad/Intune.

You can guess what happened. It worked instantly! No problems whatsoever! So it had to be a setting from Intune, maybe a security baseline went rogue? Luckily there were still 20 new Autopilot enrolled notebooks that needed to be shipped to the client.

So we also tested logging in from one of those devices. As we are almost using the exact same security baselines as our customers, we could rule out the Security Baseline. Again, you can guess what happened! It worked wonderfully!

Okay? So we needed to troubleshoot our own devices, this time … isn’t that a nice Christmas present?

So the first thing we checked was the mstsc.exe version itself because I can still remember some issues with a KB update a long time ago that really messed up the Remote desktop client.

Mmm.. this version was recently updated? I guess that could be the problem here. But still, the question remains why?

So, when you need to troubleshoot the Remote Desktop client, the Terminalservices-ClientActivexCore event log would be the first place to start.

So we opened the event log on our devices and on all devices we noticed these nice 1033 errors

Onderdeelnaam:CClientProxyTransport, :: ‘Gateway Error’ in CClientProxyTransport::SetErrorStatus at 2853 err=[0x800759ec], Foutcode:0x800759EC

Onderdeelnaam:CAAUDPClientChannel, :: ‘SecureTunnel’ in CAAUDPClientChannel::HandleChannelConnect at 958 err=[0x8007274c], Foutcode:0x8007274C

Having errors in that event log doesn’t mean anything good!

3. Solving it

I guess you deserve some background information first. Some time ago we decided to put our devices into the Insider Preview ring of Windows Update for Business, so we would know what would come. Why? So we can be prepared!

So I guess with this Windows 11 Build (22523.1000) we also got the new Remote Desktop Client 10.0.22523.1000 But why was it breaking? After ruling out everything else possible, it suddenly hit me. CAAUDPClientChannel, mmm sounds like UDP…. 🙂

It looks like a UDP issue to me indeed, luckily I can still remember some stuff from the “good old days”. You can define UDP transport settings in the Remote Desktop Gateway configuration shown below

This setting was already enabled for a long time. We decided to turn it off to check out if there was any difference.

Yes, there was… When we turned it off the Remote desktop client could log in immediately. We decided to look further into why UDP suddenly wasn’t working.

After checking out the Firewall and NAT table, we noticed something weird. The NAT rule to forward the UDP traffic was disabled?

When turning it on and enabling the UDP on the rd gateway again it also worked!

So to give a summary: It looks like the latest Remote Desktop Client version 10.0.22523.1000 has some issues determining if the UDP port is enabled and AVAILABLE, maybe it doesn’t check it, and just assumes it works? It also looks like the old version checks if UDP is available, if not it doesn’t use it

4. The Second Issue

I guess Remote Desktop issues and Windows Insider Previews are still occurring. This time we will get a nice 0x3000008 error thrown at us with the latest Windows 11 Insider Preview build: 25295.1000

When looking at the Remote Desktop Gateway, the only thing that we will notice is an event 4625 in the security log mentioning the status: 0xc000035b error

Again, we are looking at the EnforceChannelBinding / LmCompatibility error

0xC000035B when you use LmCompatibility – Windows Server | Microsoft Learn

It’s kinda funny as this error started to occur with the same customer so that enforcechannelbinding was still configured. After some more tests, I decided to just create the RDGClientTransport key with the value 1

Yes!! after closing the mstsc.exe and reopening mstsc.exe again, I could login without any issue!

Conclusion

Troubleshooting our own devices and an old remote desktop gateway, was a nice Christmas present indeed!

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Answered by:

Question

Still having error 0x300008 when connecting to remote desktop gateway. Android. Version 8.1.18.47 Same error on iOS devices with latest RDP version from appstore.

Version 8.0.6.24867 on android works fine. How can i solve this issue?

Answers

Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact tnmff@microsoft.com.

• Marked as answer by Eva Seydl Microsoft employee Tuesday, July 28, 2015 4:32 PM

Could you please share 2 screenshots of your Gateway settings on both of your Android versions? I would like to know if there is any different between these 2 versions.

There is an option for input credential in Gateway — username. Please try to manually type the domainuser to see if there is any difference.

Источник

Код ошибки 0x3000008 расширенный код ошибки 0x0

Вопрос

Still having error 0x300008 when connecting to remote desktop gateway. Android. Version 8.1.18.47 Same error on iOS devices with latest RDP version from appstore.

Version 8.0.6.24867 on android works fine. How can i solve this issue?

Ответы

Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact tnmff@microsoft.com.

• Помечено в качестве ответа Eva Seydl Microsoft employee 28 июля 2015 г. 16:32

Все ответы

Could you please share 2 screenshots of your Gateway settings on both of your Android versions? I would like to know if there is any different between these 2 versions.

There is an option for input credential in Gateway — username. Please try to manually type the domainuser to see if there is any difference.

Источник

Код ошибки 0x3000008 расширенный код ошибки 0x0

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Answered by:

Question

This works on all types of Microsoft/Windows workstations but we have not had as much luck with any types of mobile devices including both Android/iOS devices. In fact both Android and iOS devices yield the very same error message:

«We couldn’t connect to the gateway because of an error. If this keeps happening, ask your admin or tech support for help.

Error code: 0x3000008″

Does anyone have any experience with this issue/error code or has anyone had any luck getting this issue resolved and getting RD Gateway working on iOS/Android devices?

RD Gateway role is running on Server 2016 w/ Web Application proxy (IIS) running on another Server 2016 server.

Answers

I also contacted Microsoft support about this, and received the following

» The problem comes from the fact that the RDP client (MAC, iOS, Android. etc) uses absolute URI in the SSL tunnel. WAP server supports only relative URI.

Absolute URI support has been added to Azure AD Application Proxy recently. If it’s possible it is recommended you should use Azure AD Application Proxy.

The Product Group team has been informed about this and is working on finding a work-around.

But at the moment we don’t have plans on fixing the issue in WAP (2016). «

If the issue can be resolved in the Azure version, why not in the Server version? I have already paid for Server 2016, i don’t want to pay on top for Azure. I agree this is not really very good.

• Marked as answer by Eva Seydl Microsoft employee Thursday, May 25, 2017 4:02 PM

Please check the TerminalServices-Gateway operational event log and post the related errors here.

I notice that you post another similar thread in our forum, you could also try the suggestions there:

Please remember to mark the replies as answers if they help.
If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

• Proposed as answer by Eva Seydl Microsoft employee Saturday, April 1, 2017 12:44 AM

Just some more feedback from my previous post.

I have tried installing version 8.0.38 (build 27253) of the Mac RDP client. This version also fails. I then tried to install version 8.2.31 (build:750), again with no luck.

I have configured in my Azure Application proxy with the following settings:-

External URL:https:// .msappproxy.net/rpc/

The above settings work perfectly from a Windows 10 laptop using the RDP client.

Hi, we’ve got the same issue!

Here is the setup:

• RDGW / RDCB / RDSH server: Windows 2016, domain-joined
• WAP: Windows 2016, in DMZ
• Internal and external RDGW names are the same (like https://ts. )
• WAP publishing rule: pass-through authentication, from https://ts. /rpc/ to https://ts. /rpc/. (I’ve tried https://ts. / as well)
• Win PC RDP client version: 10.1.972.0 (ModernUI application, MSTSC is works well too)
• Android RDP client version: 8.1.52.274.

When I try to connect via the Microsoft Remote Desktop application from the remote PC, it works well. I can see the log entries in the TerminalServices-Gateway log. And here is the IIS log sample from the RDGW:

But when I try to connect from the iOS, Android or MacOS with the Microsoft Remote Desktop Client’ I’ve got an error:

We couldn’t connect to the gateway because on an error. If this keeps happening, ask your admin or tech support for help.

Error code: 0x3000008

There are no log entries in the TerminalServices-Gateway log at all.

And here is the IIS log:

So the difference is in the URL. When it has relative path — it works, but when it is an absolute, and with the ‘/’ in front of «https:», it fails with the 404 error

The test #3: I use the same android client, but with the VPN to avoid usage of WAP. The connection is OK and the log is fine too:

So here is my observation: when I use WAP with the non-Windows RDP client, the URL is changing and client doesn’t work.

Источник

Способы исправления ошибки 0x00000080: NMI HARDWARE FAILURE

В коде синего экрана смерти NMI_HARDWARE_FAILURE уже указано на проблему с жестким диском. Однако, как показывает анализ отечественных и зарубежных форумов, а также официального блога Microsoft, ошибка 0x00000080 может появиться не только в случае повреждения HDD или SSD, но и в ряде других ситуаций: при повреждении системных файлов, при проблемах с драйверами, после установки нового оборудования, при неправильном подключении носителя к ПК, при повреждении порта, через который подключен сам накопитель.

Методы решения ошибки 0x00000080: NMI_HARDWARE_FAILURE

Если на вашем компьютере появился синий экран смерти NMI HARDWARE FAILURE, то разработчики компании Microsoft предлагают осуществить несколько несложных действий. Рассмотрим сначала официальные рекомендации.

Способ 1. Переподключение устройства

Разработчики Майкрософт утверждают, что BSOD 0x00000080: NMI_HARDWARE_FAILURE чаще всего появляется по причине установки нового несовместимого с операционной системой или материнской платой оборудования. Если вы подключили к ПК новый жесткий диск, то эта вероятность минимальна. ОС не предъявляет никаких требований касательно размера, производителя и типа носителя. Поэтому проблема может крыться только в правильности подключения накопителя. Поэтому необходимо выключить ПК, обесточить материнскую плату (на несколько секунд нажать кнопку питания, чтобы снять остатки заряда с платы) и проверить, правильно ли подсоединён диск к плате: использован ли кабель SATA, в тот ли порт он подключен, достаточно ли плотно подключен носитель, подсоединён ли к нему кабель питания.

Если ПК все равно запускается с ошибкой, а диск правильно подключен, то стоит заменить кабель. Возможно, он нерабочий, где-то перегнутый, нет контакта (это не проверить визуально, а только заменив кабель). Также можно попробовать подключить диск к другому порту SATA. На всех материнских платах есть от 2 до 8 портов SATA. Возможно, нерабочий сам порт.

Это касается не только жесткого диска. Если вы подключили к ПК новое устройство, нужно его переподключить и проверить все кабели: USB, питания.

Способ 2. Переустановка драйверов

Поскольку ошибка 0x00000080 NMI_HARDWARE_FAILURE частый гость на Windows 7 и Windows 10 после установки новых компонентов и подключения новых устройств, то для её исправления нужно обновить, а в некоторых случаях откатить, программное обеспечение к рабочей версии. Для этого нужно нажать «Win+R» и ввести «devmgmt.msc».

Откроется «Диспетчер устройств». Нужно развернуть всю ветку устройств и найти последнее подключенное. К примеру, возьмем жесткий диск. Нажимаем на элементе древовидного меню правой кнопкой мыши и выбираем «Свойства».

Откроется небольшое окно. Переходим во вкладку «Драйвер». Нажимаем на кнопку «Обновить» (если вы установили новый жесткий диск или устройство) или «Откатить» (если чистили ПК, отсоединяли оборудование или устанавливали какое-то ПО, которое может повлиять на работу устройства).

ВАЖНО! Загружать драйвера нужно с официальной страницы производителя оборудования. Не скачивайте ПО со сторонних сайтов. Вредоносные драйвера могут нанести непоправимый вред вашему компьютеру.

После переустановки ПО нужно перезагрузить ПК, чтобы изменения вступили в силу.

Способ 3. Проверка системных файлов

Достаточно часто ошибка 0x00000080 появляется по причине повреждения системных файлов. Поэтому для начала нужно проверить систему на вирусы, которые могут повредить или изменить эти файлы, а далее запустить командную строку с правами Администратора и ввести sfc /scannow.

Утилита, в случае обнаружения повреждений, восстановит файлы.

Если же восстановить поврежденные файлы невозможно, то стоит выполнить откат системы, используя контрольную точку по восстановлению Windows или задействовать установочный диск.

ВАЖНО! Можно задействовать команду Dism /Online /Cleanup-Image /RestoreHealth, которая работает в тех случаях, когда sfc не помогает.

Способ 4. Проверка оперативной памяти

Если у вас Windows 10 (это способ только для данной сборки, на ранних сборках данная ошибка с ОЗУ не связана почему-то), то стоит проверить ОЗУ программой MemTest86. Многие пользователи зарубежных форумов отметили, что на их Windows 10 BSOD NMI_HARDWARE_FAILURE появлялся по причине сбоев в работе оперативной памяти. Поэтому тестируем модули, меняем их местами, чистим контакты.

Способ 5. Проверка напряжения

Ошибка NMI_HARDWARE_FAILURE связана с аппаратной поломкой. Не исключено, что она кроется в недостатке питания некоторых компонентов ПК. Поэтому рекомендуем скачать утилиту AIDA64, переходим в раздел «Компьютер», «Датчик» и смотрим вольтаж установленных компонентов.

Также рекомендуем отключить блок питания от ПК, открыть его корпус и проверить, нет ли вздутых конденсаторов. То же самое нужно сделать и с материнской платой. Нужно проверить все конденсаторы.

ВАЖНО! Если блок питания на гарантии, то вскрывать его для визуального осмотра не стоит. Вы нарушите гарантийные условия.

В случае, если исправить неполадку вышеуказанными способами не удалось, стоит переустановить Windows и провести полную диагностику всех установленных компонентов.

Источник

Code	Reason
0	No error
1	User-initiated client disconnect.
2	User-initiated client logoff.
3	Your Remote Desktop Services session has ended, possibly for one of the following reasons: The administrator has ended the session. An error occurred while the connection was being established. A network problem occurred. For help solving the problem, see «Remote Desktop» in Help and Support.
260	Remote Desktop can’t find the computer «». This might mean that «» does not belong to the specified network. Verify the computer name and domain that you are trying to connect to.
262	This computer can’t connect to the remote computer. Your computer does not have enough virtual memory available. Close your other programs, and then try connecting again. If the problem continues, contact your network administrator or technical support.
264	This computer can’t connect to the remote computer. The two computers couldn’t connect in the amount of time allotted. Try connecting again. If the problem continues, contact your network administrator or technical support.
266	The smart card service is not running. Please start the smart card service and try again.
516	Remote Desktop can’t connect to the remote computer for one of these reasons: 1) Remote access to the server is not enabled 2) The remote computer is turned off 3) The remote computer is not available on the network Make sure the remote computer is turned on and connected to the network, and that remote access is enabled.
522	A smart card reader was not detected. Please attach a smart card reader and try again.
772	This computer can’t connect to the remote computer. The connection was lost due to a network error. Try connecting again. If the problem continues, contact your network administrator or technical support.
778	There is no card inserted in the smart card reader. Please insert your smart card and try again.
1030	Because of a security error, the client could not connect to the remote computer. Verify that you are logged on to the network, and then try connecting again.
1032	The specified computer name contains invalid characters. Please verify the name and try again.
1034	An error has occurred in the smart card subsystem. Please contact your helpdesk about this error.
1796	This computer can’t connect to the remote computer. Try connecting again. If the problem continues, contact the owner of the remote computer or your network administrator.
1800	Your computer could not connect to another console session on the remote computer because you already have a console session in progress.
2056	The remote computer disconnected the session because of an error in the licensing protocol. Please try connecting to the remote computer again or contact your server administrator.
2308	Your Remote Desktop Services session has ended. The connection to the remote computer was lost, possibly due to network connectivity problems. Try connecting to the remote computer again. If the problem continues, contact your network administrator or technical support.
2311	The connection has been terminated because an unexpected server authentication certificate was received from the remote computer. Try connecting again. If the problem continues, contact the owner of the remote computer or your network administrator.
2312	A licensing error occurred while the client was attempting to connect (Licensing timed out). Please try connecting to the remote computer again.
2567	The specified username does not exist. Verify the username and try logging in again. If the problem continues, contact your system administrator or technical support.
2820	This computer can’t connect to the remote computer. An error occurred that prevented the connection. Try connecting again. If the problem continues, contact the owner of the remote computer or your network administrator.
2822	Because of an error in data encryption, this session will end. Please try connecting to the remote computer again.
2823	The user account is currently disabled and cannot be used. For assistance, contact your system administrator or technical support.
2825	The remote computer requires Network Level Authentication, which your computer does not support. For assistance, contact your system administrator or technical support.
3079	A user account restriction (for example, a time-of-day restriction) is preventing you from logging on. For assistance, contact your system administrator or technical support.
3080	The remote session was disconnected because of a decompression failure at the client side. Please try connecting to the remote computer again.
3335	As a security precaution, the user account has been locked because there were too many logon attempts or password change attempts. Wait a while before trying again, or contact your system administrator or technical support.
3337	The security policy of your computer requires you to type a password on the Windows Security dialog box. However, the remote computer you want to connect to cannot recognize credentials supplied using the Windows Security dialog box. For assistance, contact your system administrator or technical support.
3590	The client can’t connect because it doesn’t support FIPS encryption level. Please lower the server side required security level Policy, or contact your network administrator for assistance
3591	This user account has expired. For assistance, contact your system administrator or technical support.
3592	Failed to reconnect to your remote session. Please try to connect again.
3593	The remote PC doesn’t support Restricted Administration mode.
3847	This user account’s password has expired. The password must change in order to logon. Please update the password or contact your system administrator or technical support.
3848	A connection will not be made because credentials may not be sent to the remote computer. For assistance, contact your system administrator.
4103	The system administrator has restricted the times during which you may log in. Try logging in later. If the problem continues, contact your system administrator or technical support.
4104	The remote session was disconnected because your computer is running low on video resources. Close your other programs, and then try connecting again. If the problem continues, contact your network administrator or technical support.
4359	The system administrator has limited the computers you can log on with. Try logging on at a different computer. If the problem continues, contact your system administrator or technical support.
4615	You must change your password before logging on the first time. Please update your password or contact your system administrator or technical support.
4871	The system administrator has restricted the types of logon (network or interactive) that you may use. For assistance, contact your system administrator or technical support.
5127	The Kerberos sub-protocol User2User is required. For assistance, contact your system administrator or technical support.
6919	Remote Desktop cannot connect to the remote computer because the authentication certificate received from the remote computer is expired or invalid. In some cases, this error might also be caused by a large time discrepancy between the client and server computers.
7431	Remote Desktop cannot verify the identity of the remote computer because there is a time or date difference between your computer and the remote computer. Make sure your computer’s clock is set to the correct time, and then try connecting again. If the problem occurs again, contact your network administrator or the owner of the remote computer.
8711	Your computer can’t connect to the remote computer because your smart card is locked out. Contact your network administrator about unlocking your smart card or resetting your PIN.
9479	Could not auto-reconnect to your applications,please re-launch your applications
9732	Client and server versions do not match. Please upgrade your client software and then try connecting again.
33554433	Failed to reconnect to the remote program. Please restart the remote program.
33554434	The remote computer does not support RemoteApp. For assistance, contact your system administrator.
50331649	Your computer can’t connect to the remote computer because the username or password is not valid. Type a valid user name and password.
50331650	Your computer can’t connect to the remote computer because it can’t verify the certificate revocation list. Contact your network administrator for assistance.
50331651	Your computer can’t connect to the remote computer due to one of the following reasons: 1) The requested Remote Desktop Gateway server address and the server SSL certificate subject name do not match. 2) The certificate is expired or revoked. 3) The certificate root authority does not trust the certificate. Contact your network administrator for assistance.
50331652	Your computer can’t connect to the remote computer because the SSL certificate was revoked by the certification authority. Contact your network administrator for assistance.
50331653	This computer can’t verify the identity of the RD Gateway «». It’s not safe to connect to servers that can’t be identified. Contact your network administrator for assistance.
50331654	Your computer can’t connect to the remote computer because the Remote Desktop Gateway server address requested and the certificate subject name do not match. Contact your network administrator for assistance.
50331655	Your computer can’t connect to the remote computer because the Remote Desktop Gateway server’s certificate has expired or has been revoked. Contact your network administrator for assistance.
50331656	Your computer can’t connect to the remote computer because an error occurred on the remote computer that you want to connect to. Contact your network administrator for assistance.
50331657	An error occurred while sending data to the Remote Desktop Gateway server. The server is temporarily unavailable or a network connection is down. Try again later, or contact your network administrator for assistance.
50331658	An error occurred while receiving data from the Remote Desktop Gateway server. Either the server is temporarily unavailable or a network connection is down. Try again later, or contact your network administrator for assistance.
50331659	Your computer can’t connect to the remote computer because an alternate logon method is required. Contact your network administrator for assistance.
50331660	Your computer can’t connect to the remote computer because the Remote Desktop Gateway server address is unreachable or incorrect. Type a valid Remote Desktop Gateway server address.
50331661	Your computer can’t connect to the remote computer because the Remote Desktop Gateway server is temporarily unavailable. Try reconnecting later or contact your network administrator for assistance.
50331662	Your computer can’t connect to the remote computer because the Remote Desktop Services client component is missing or is an incorrect version. Verify that setup was completed successfully, and then try reconnecting later.
50331663	Your computer can’t connect to the remote computer because the Remote Desktop Gateway server is running low on server resources and is temporarily unavailable. Try reconnecting later or contact your network administrator for assistance.
50331664	Your computer can’t connect to the remote computer because an incorrect version of rpcrt4.dll has been detected. Verify that all components for Remote Desktop Gateway client were installed correctly.
50331665	Your computer can’t connect to the remote computer because no smart card service is installed. Install a smart card service and then try again, or contact your network administrator for assistance.
50331666	Your computer can’t stay connected to the remote computer because the smart card has been removed. Try again using a valid smart card, or contact your network administrator for assistance.
50331667	Your computer can’t connect to the remote computer because no smart card is available. Try again using a smart card.
50331668	Your computer can’t stay connected to the remote computer because the smart card has been removed. Reinsert the smart card and then try again.
50331669	Your computer can’t connect to the remote computer because the user name or password is not valid. Please type a valid user name and password.
50331671	Your computer can’t connect to the remote computer because a security package error occurred in the transport layer. Retry the connection or contact your network administrator for assistance.
50331672	The Remote Desktop Gateway server has ended the connection. Try reconnecting later or contact your network administrator for assistance.
50331673	The Remote Desktop Gateway server administrator has ended the connection. Try reconnecting later or contact your network administrator for assistance.
50331674	Your computer can’t connect to the remote computer due to one of the following reasons: 1) Your credentials (the combination of user name, domain, and password) were incorrect. 2) Your smart card was not recognized.
50331675	Remote Desktop can’t connect to the remote computer «» for one of these reasons: 1) Your user account is not listed in the RD Gateway’s permission list 2) You might have specified the remote computer in NetBIOS format (for example, computer1), but the RD Gateway is expecting an FQDN or IP address format (for example, computer1.fabrikam.com or 157.60.0.1). Contact your network administrator for assistance.
50331676	Remote Desktop can’t connect to the remote computer «» for one of these reasons: 1) Your user account is not authorized to access the RD Gateway «» 2) Your computer is not authorized to access the RD Gateway «» 3) You are using an incompatible authentication method (for example, the RD Gateway might be expecting a smart card but you provided a password) Contact your network administrator for assistance.
50331679	Your computer can’t connect to the remote computer because your network administrator has restricted access to this RD Gateway server. Contact your network administrator for assistance.
50331680	Your computer can’t connect to the remote computer because the web proxy server requires authentication. To allow unauthenticated traffic to an RD Gateway server through your web proxy server, contact your network administrator.
50331681	Your computer can’t connect to the remote computer because your password has expired or you must change the password. Please change the password or contact your network administrator or technical support for assistance.
50331682	Your computer can’t connect to the remote computer because the Remote Desktop Gateway server reached its maximum allowed connections. Try reconnecting later or contact your network administrator for assistance.
50331683	Your computer can’t connect to the remote computer because the Remote Desktop Gateway server does not support the request. Contact your network administrator for assistance.
50331684	Your computer can’t connect to the remote computer because the client does not support one of the Remote Desktop Gateway’s capabilities. Contact your network administrator for assistance.
50331685	Your computer can’t connect to the remote computer because the Remote Desktop Gateway server and this computer are incompatible. Contact your network administrator for assistance.
50331686	Your computer can’t connect to the remote computer because the credentials used are not valid. Insert a valid smart card and type a PIN or password, and then try connecting again.
50331687	Your computer can’t connect to the remote computer because your computer or device did not pass the Network Access Protection requirements set by your network administrator. Contact your network administrator for assistance.
50331688	Your computer can’t connect to the remote computer because no certificate was configured to use at the Remote Desktop Gateway server. Contact your network administrator for assistance.
50331689	Your computer can’t connect to the remote computer because the RD Gateway server that you are trying to connect to is not allowed by your computer administrator. If you are the administrator, add this Remote Desktop Gateway server name to the trusted Remote Desktop Gateway server list on your computer and then try connecting again.
50331690	Your computer can’t connect to the remote computer because your computer or device did not meet the Network Access Protection requirements set by your network administrator, for one of the following reasons: 1) The Remote Desktop Gateway server name and the server’s public key certificate subject name do not match. 2) The certificate has expired or has been revoked. 3) The certificate root authority does not trust the certificate. 4) The certificate key extension does not support encryption. 5) Your computer cannot verify the certificate revocation list. Contact your network administrator for assistance.
50331691	Your computer can’t connect to the remote computer because a user name and password are required to authenticate to the Remote Desktop Gateway server instead of smart card credentials.
50331692	Your computer can’t connect to the remote computer because smart card credentials are required to authenticate to the Remote Desktop Gateway server instead of a user name and password.
50331693	Your computer can’t connect to the remote computer because no smart card reader is detected. Connect a smart card reader and then try again, or contact your network administrator for assistance.
50331695	Your computer can’t connect to the remote computer because authentication to the firewall failed due to missing firewall credentials. To resolve the issue, go to the firewall website that your network administrator recommends, and then try the connection again, or contact your network administrator for assistance.
50331696	Your computer can’t connect to the remote computer because authentication to the firewall failed due to invalid firewall credentials. To resolve the issue, go to the firewall website that your network administrator recommends, and then try the connection again, or contact your network administrator for assistance.
50331698	Your Remote Desktop Services session ended because the remote computer didn’t receive any input from you.
50331699	The connection has been disconnected because the session timeout limit was reached.
50331700	Your computer can’t connect to the remote computer because an invalid cookie was sent to the Remote Desktop Gateway server. Contact your network administrator for assistance.
50331701	Your computer can’t connect to the remote computer because the cookie was rejected by the Remote Desktop Gateway server. Contact your network administrator for assistance.
50331703	Your computer can’t connect to the remote computer because the Remote Desktop Gateway server is expecting an authentication method different from the one attempted. Contact your network administrator for assistance.
50331704	The RD Gateway connection ended because periodic user authentication failed. Try reconnecting with a correct user name and password. If the reconnection fails, contact your network administrator for further assistance.
50331705	The RD Gateway connection ended because periodic user authorization failed. Try reconnecting with a correct user name and password. If the reconnection fails, contact your network administrator for further assistance.
50331707	Your computer can’t connect to the remote computer because the Remote Desktop Gateway and the remote computer are unable to exchange policies. This could happen due to one of the following reasons: 1. The remote computer is not capable of exchanging policies with the Remote Desktop Gateway. 2. The remote computer’s configuration does not permit a new connection. 3. The connection between the Remote Desktop Gateway and the remote computer ended. Contact your network administrator for assistance.
50331708	Your computer can’t connect to the remote computer, possibly because the smart card is not valid, the smart card certificate was not found in the certificate store, or the Certificate Propagation service is not running. Contact your network administrator for assistance.
50331709	To use this program or computer, first log on to the following website: <a href=»»></a>.
50331710	To use this program or computer, you must first log on to an authentication website. Contact your network administrator for assistance.
50331711	Your session has ended. To continue using the program or computer, first log on to the following website: <a href=»»></a>.
50331712	Your session has ended. To continue using the program or computer, you must first log on to an authentication website. Contact your network administrator for assistance.
50331713	The RD Gateway connection ended because periodic user authorization failed. Your computer or device didn’t pass the Network Access Protection (NAP) requirements set by your network administrator. Contact your network administrator for assistance.
50331714	Your computer can’t connect to the remote computer because the size of the cookie exceeded the supported size. Contact your network administrator for assistance.
50331716	Your computer can’t connect to the remote computer using the specified forward proxy configuration. Contact your network administrator for assistance.
50331717	This computer cannot connect to the remote resource because you do not have permission to this resource. Contact your network administrator for assistance.
50331718	There are currently no resources available to connect to. Retry the connection or contact your network administrator.
50331719	An error occurred while Remote Desktop Connection was accessing this resource. Retry the connection or contact your system administrator.
50331721	Your Remote Desktop Client needs to be updated to the newest version. Contact your system administrator for help installing the update, and then try again.
50331722	Your network configuration doesn’t allow the necessary HTTPS ports. Contact your network administrator for help allowing those ports or disabling the web proxy, and then try connecting again.
50331723	We’re setting up more resources, and it might take a few minutes. Please try again later.
50331724	The user name you entered does not match the user name used to subscribe to your applications. If you wish to sign in as a different user please choose Sign Out from the Home menu.
50331725	Looks like there are too many users trying out the Azure RemoteApp service at the moment. Please wait a few minutes and then try again.
50331726	Maximum user limit has been reached. Please contact your administrator for further assistance.
50331727	Your trial period for Azure RemoteApp has expired. Ask your admin or tech support for help.
50331728	You no longer have access to Azure RemoteApp. Ask your admin or tech support for help.