Jam 9000 kyocera 6525 ошибка

Прилепить пост

Изменить размер шрифта ↓ВернутьИзменить размер шрифта ↑Добрый день,может у кого- было подобное,возникает следующая ситуация с аппаратом, замятие бумаги в автоподатчике в районе регистрации, либо на выходе,когда лист почти весь вышел, Jam 9000,9110,либо 9410.При этом ролики захвата,подхвата, тормозной поменяны,прочищен тракт прохождения бумаги, проверены датчики, заменил клатчи захвата и регистрации,были загнуты в узле регистрации майларки,выправил их.Иногда автоподатчик может отработать без заминов, особенно при включении.Затем периодически возникают замины. Счетчик 136625 страниц

Аватар пользователя

Alex12

  

Увидел чернила

  • Не в сети
  • Сайт

Прилепить пост

Сообщение Alex12 » Вт июл 28, 2020 12:34 pm

Изменить размер шрифта ↓ВернутьИзменить размер шрифта ↑

Goldwater писал(а):Есть два варианта решения проблемы: японский подороже но побыстрее и русский подешевле но подольше.
Оба начинаются с обязательного обновления прошивки.
Вам который?

Прошивка не помогла, рассмотрю оба варианта.

Аватар пользователя

Alex12

  

Увидел чернила

  • Не в сети
  • Сайт
  • [SCANNER ERROR] Lamp Error Kyocera FS-1016

    мастерчип в форуме Принтеры, МФУ, факсы, копиры формата A4

    3
    6735

    Усатый Полосатый
    Перейти к последнему сообщению
    Вс окт 28, 2018 11:08 pm
  • Kyocera 1035 «бледная» печать

    srMax в форуме Принтеры, МФУ, факсы, копиры формата A4

    2
    14198

    srMax
    Перейти к последнему сообщению
    Пт янв 23, 2015 2:49 pm
  • Kyocera FS-1120d индикатор «Нет бумаги»

    vs-dos в форуме Принтеры, МФУ, факсы, копиры формата A4

    11
    15414

    СТРОНЦИЙ
    Перейти к последнему сообщению
    Вт ноя 02, 2021 2:24 pm
  • Kyocera Ecosys M2635dn «поворот» изображения

    Искатель в форуме Принтеры, МФУ, факсы, копиры формата A4

    10
    6309

    MatrixAgent
    Перейти к последнему сообщению
    Ср апр 08, 2020 5:18 am
  • Kyocera taskalfa 3501 «открыта крышка основного блока»

    Юрий Яраскин в форуме Принтеры, МФУ, копиры формата A3

    3
    3066

    Goldwater
    Перейти к последнему сообщению
    Пт сен 10, 2021 1:31 pm

Вернуться в Принтеры, МФУ, копиры формата A3

Кто сейчас на форуме

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 13

Источник

Ошибки Kyocera ECOSYS M2030dn

Ошибки Kyocera ECOSYS M2030pn

Ошибки Kyocera ECOSYS M2035dn

Ошибки Kyocera ECOSYS M2040dn

Ошибки Kyocera ECOSYS M2135dn

Ошибки Kyocera ECOSYS M2530dn

Ошибки Kyocera ECOSYS M2535dn

Ошибки Kyocera ECOSYS M2540dn

Ошибки Kyocera ECOSYS M2540dw

Ошибки Kyocera ECOSYS M2635dn

Ошибки Kyocera ECOSYS M2635dw

Ошибки Kyocera ECOSYS M2640idw

Ошибки Kyocera ECOSYS M3040dn

Ошибки Kyocera ECOSYS M3040idn

Ошибки Kyocera ECOSYS M3145dn

Ошибки Kyocera ECOSYS M3145idn

Ошибки Kyocera ECOSYS M2735dw

Ошибки Kyocera ECOSYS M3540dn

Ошибки Kyocera ECOSYS M3540idn

Ошибки Kyocera ECOSYS M3550idn

Ошибки Kyocera ECOSYS M3560idn

Ошибки Kyocera ECOSYS M3645dn

Ошибки Kyocera ECOSYS M3645idn

Ошибки Kyocera ECOSYS M3655idn

Ошибки Kyocera ECOSYS M3660idn

Ошибки Kyocera ECOSYS M3860idn

Ошибки Kyocera ECOSYS M3860idn

Ошибки Kyocera ECOSYS M4125idn

Ошибки Kyocera ECOSYS M4132idn

Ошибки Kyocera ECOSYS M5521cdn

Ошибки Kyocera ECOSYS M5521cdw

Ошибки Kyocera ECOSYS M5526cdn

Ошибки Kyocera ECOSYS M5526cdw

Ошибки Kyocera ECOSYS M6026cdn

Ошибки Kyocera ECOSYS M6026cidn

Ошибки Kyocera ECOSYS M6030cdn

Ошибки Kyocera ECOSYS M6035cidn

Ошибки Kyocera ECOSYS M6230cidn

Ошибки Kyocera ECOSYS M6235cidn

Ошибки Kyocera ECOSYS M6526cdn

Ошибки Kyocera ECOSYS M6526cidn

Ошибки Kyocera ECOSYS M6530cdn

Ошибки Kyocera ECOSYS M6535cidn

Ошибки Kyocera ECOSYS M6630cidn

Ошибки Kyocera ECOSYS M6635cidn

Ошибки Kyocera ECOSYS M8124cidn

Ошибки Kyocera ECOSYS M8130cidn

Ошибки Kyocera ECOSYS P2035d

Ошибки Kyocera ECOSYS P2040dn

Ошибки Kyocera ECOSYS P2040dw

Ошибки Kyocera ECOSYS P2135d

Ошибки Kyocera ECOSYS P2135dn

Ошибки Kyocera ECOSYS P2235dn

Ошибки Kyocera ECOSYS P2235dw

Ошибки Kyocera ECOSYS P3045dn

Ошибки Kyocera ECOSYS P3050dn

Ошибки Kyocera ECOSYS P3055dn

Ошибки Kyocera ECOSYS P3060dn

Ошибки Kyocera ECOSYS P3145dn

Ошибки Kyocera ECOSYS P3150dn

Ошибки Kyocera ECOSYS P3155dn

Ошибки Kyocera ECOSYS P3160dn

Ошибки Kyocera ECOSYS P3260dn

Ошибки Kyocera ECOSYS P4035dn

Ошибки Kyocera ECOSYS P4040dn

Ошибки Kyocera ECOSYS P5021cdn

Ошибки Kyocera ECOSYS P5021cdw

Ошибки Kyocera ECOSYS P5026cdn

Ошибки Kyocera ECOSYS P5026cdw

Ошибки Kyocera ECOSYS P6021cdn

Ошибки Kyocera ECOSYS P6026cdn

Ошибки Kyocera ECOSYS P6030cdn

Ошибки Kyocera ECOSYS P6035cdn

Ошибки Kyocera ECOSYS P6130cdn

Ошибки Kyocera ECOSYS P6230cdn

Ошибки Kyocera ECOSYS P6235cdn

Ошибки Kyocera ECOSYS P7035cdn

Ошибки Kyocera ECOSYS P7040cdn

Ошибки Kyocera ECOSYS P7240cdn

Ошибки Kyocera ECOSYS P8060cdn

Ошибки Kyocera FS-C8600DN

Ошибки Kyocera FS-C8650DN

Ошибки Kyocera FS1016MFP

Ошибки Kyocera FS1018MFP

Ошибки Kyocera FS1020MFP

Ошибки Kyocera FS1024MFP

Ошибки Kyocera FS1025MFP

Ошибки Kyocera FS1028MFP

Ошибки Kyocera FS1030MFP

Ошибки Kyocera FS1035MFP

Ошибки Kyocera FS1040

Ошибки Kyocera FS1050

Ошибки Kyocera FS1060DN

Ошибки Kyocera FS1100

Ошибки Kyocera FS1110

Ошибки Kyocera FS1116MFP

Ошибки Kyocera FS1118MFP

Ошибки Kyocera FS1120

Ошибки Kyocera FS1120MFP

Ошибки Kyocera FS1124MFP

Ошибки Kyocera FS1125MFP

Ошибки Kyocera FS1128MFP

Ошибки Kyocera FS1130MFP

Ошибки Kyocera FS1135MFP

Ошибки Kyocera FS1200

Ошибки Kyocera FS1220MFP

Ошибки Kyocera FS1300D

Ошибки Kyocera FS1320D

Ошибки Kyocera FS1320MFP

Ошибки Kyocera FS1325MFP

Ошибки Kyocera FS1350DN

Ошибки Kyocera FS1370DN

Ошибки Kyocera FS1500

Ошибки Kyocera FS6020

Ошибки Kyocera FS6025MFP

Ошибки Kyocera FS6025MFPB

Ошибки Kyocera FS6030MFP

Ошибки Kyocera FS6500

Ошибки Kyocera FS6525MFP

Ошибки Kyocera FS6530MFP

Ошибки Kyocera FS6700

Ошибки Kyocera FS6900

Ошибки Kyocera FS6950DN

Ошибки Kyocera FS8000CD

Ошибки Kyocera FS8000CN

Ошибки Kyocera FS8100DN

Ошибки Kyocera TASKalfa 180

Ошибки Kyocera TASKalfa 1800

Ошибки Kyocera TASKalfa 1801

Ошибки Kyocera TASKalfa 181

Ошибки Kyocera TASKalfa 205c

Ошибки Kyocera TASKalfa 220

Ошибки Kyocera TASKalfa 2200

Ошибки Kyocera TASKalfa 2201

Ошибки Kyocera TASKalfa 221

Ошибки Kyocera TASKalfa 2420w

Ошибки Kyocera TASKalfa 2460ci

Ошибки Kyocera TASKalfa 2470ci

Ошибки Kyocera TASKalfa 250ci

Ошибки Kyocera TASKalfa 2510i

Ошибки Kyocera TASKalfa 2520i

Ошибки Kyocera TASKalfa 255

Ошибки Kyocera TASKalfa 2550ci

Ошибки Kyocera TASKalfa 2551ci

Ошибки Kyocera TASKalfa 2552ci

Ошибки Kyocera TASKalfa 2553ci

Ошибки Kyocera TASKalfa 255b

Ошибки Kyocera TASKalfa 255c

Ошибки Kyocera TASKalfa 265ci

Ошибки Kyocera TASKalfa 300ci

Ошибки Kyocera TASKalfa 300i

Ошибки Kyocera TASKalfa 3010i

Ошибки Kyocera TASKalfa 3011i

Ошибки Kyocera TASKalfa 305

Ошибки Kyocera TASKalfa 3050ci

Ошибки Kyocera TASKalfa 3051ci

Ошибки Kyocera TASKalfa 306ci

Ошибки Kyocera TASKalfa 307ci

Ошибки Kyocera TASKalfa 308ci

Ошибки Kyocera TASKalfa 3212i

Ошибки Kyocera TASKalfa 3252ci

Ошибки Kyocera TASKalfa 3253ci

Ошибки Kyocera TASKalfa 3500i

Ошибки Kyocera TASKalfa 3501i

Ошибки Kyocera TASKalfa 350ci

Ошибки Kyocera TASKalfa 3510i

Ошибки Kyocera TASKalfa 3511i

Ошибки Kyocera TASKalfa 3550ci

Ошибки Kyocera TASKalfa 3551ci

Ошибки Kyocera TASKalfa 3552ci

Ошибки Kyocera TASKalfa 3553ci

Ошибки Kyocera TASKalfa 356ci

Ошибки Kyocera TASKalfa 358ci

Ошибки Kyocera TASKalfa 4002i

Ошибки Kyocera TASKalfa 4003i

Ошибки Kyocera TASKalfa 400ci

Ошибки Kyocera TASKalfa 4012i

Ошибки Kyocera TASKalfa 4052ci

Ошибки Kyocera TASKalfa 4053ci

Ошибки Kyocera TASKalfa 406ci

Ошибки Kyocera TASKalfa 408ci

Ошибки Kyocera TASKalfa 420i

Ошибки Kyocera TASKalfa 4500i

Ошибки Kyocera TASKalfa 4501i

Ошибки Kyocera TASKalfa 4550ci

Ошибки Kyocera TASKalfa 4551ci

Ошибки Kyocera TASKalfa 4820w

Ошибки Kyocera TASKalfa 5002i

Ошибки Kyocera TASKalfa 5003i

Ошибки Kyocera TASKalfa 500ci

Ошибки Kyocera TASKalfa 5052ci

Ошибки Kyocera TASKalfa 5053ci

Ошибки Kyocera TASKalfa 508ci

Ошибки Kyocera TASKalfa 520i

Ошибки Kyocera TASKalfa 5500i

Ошибки Kyocera TASKalfa 5501i

Ошибки Kyocera TASKalfa 550c

Ошибки Kyocera TASKalfa 552ci

Ошибки Kyocera TASKalfa 5550ci

Ошибки Kyocera TASKalfa 5551ci

Ошибки Kyocera TASKalfa 6002i

Ошибки Kyocera TASKalfa 6003i

Ошибки Kyocera TASKalfa 6052ci

Ошибки Kyocera TASKalfa 6053ci

Ошибки Kyocera TASKalfa 620

Ошибки Kyocera TASKalfa 6500i

Ошибки Kyocera TASKalfa 6501i

Ошибки Kyocera TASKalfa 650c

Ошибки Kyocera TASKalfa 6550ci

Ошибки Kyocera TASKalfa 6551ci

Ошибки Kyocera TASKalfa 7002i

Ошибки Kyocera TASKalfa 7003i

Ошибки Kyocera TASKalfa 7052ci

Ошибки Kyocera TASKalfa 7353ci

Ошибки Kyocera TASKalfa 750c

Ошибки Kyocera TASKalfa 7550ci

Ошибки Kyocera TASKalfa 7551ci

Ошибки Kyocera TASKalfa 8000i

Ошибки Kyocera TASKalfa 8001i

Ошибки Kyocera TASKalfa 8002i

Ошибки Kyocera TASKalfa 8003i

Ошибки Kyocera TASKalfa 8052ci

Ошибки Kyocera TASKalfa 820

Ошибки Kyocera TASKalfa 8353ci

Ошибки Kyocera TASKalfa 9002i

Ошибки Kyocera TASKalfa 9003i

Источник

Все современные копировальные аппараты, мфу и принтеры Kyocera имеют возможность диагностировать все узлы устройства в режиме запуска и во время работы аппарата. По этому, если во время включения или во время работы произошел сбой, то техника Kyocera сможет сообщить о наличии ошибки.

В большинстве случаев у аппаратов Kyocera код ошибки отображается на дисплее, в остальных случаях тип ошибки зависит от последовательности и количества миганий индикаторов.
Если Ваш копировальный аппарат, МФУ или принтер Kyocera выдал на дисплее некий код, то узнать причину, описание возникновения ошибки, а так же в каком узле аппарата стоит искать проблему, Вы можете в этом разделе выбрав интересующую модель из списка.

Но диагностика не решит проблему сбоя аппарата, для этого лучше обратиться к профессиональным и опытным сервисным специалистам компании Kyomart! Позвоните нам по телефону
8 (343) 288-23-45 или отправьте запрос на электронную почту: sales@kyomart.ru , и мы обязательно свяжемся с Вами в кратчайшие сроки.

Код ошибки Описание ошибки Причина ошибки
0030 FAX control PWB system error
Processing with the fax software was disabled due to a hardware problem. 		Defective FAX control PWB.
0060 Engine PWB type error Defective engine sub PCB.
0070 FAX control PWB incompatible detection error
Abnormal detection of FAX control PWB incompatibility In the initial communication with the FAX control PWB, any normal communication command is not transmitted. 		Defective FAX software
Defective FAX control PWB.
0100 Backup memory device error Defective flash memory.
0120 MAC address data error
For data in which the MAC address is invalid. 		Defective main PWB.
Defective flash memory.
Defective engine PWB.
0130 Backup memory read/write error (main PWB) Defective flash memory.
Defective main PWB.
0140 Backup memory data error (main PWB) Defective flash memory.
Defective main PWB.
0150 Backup memory read/write error (engine PWB)
Detecting engine PWB EEPROM communication error. 		Improper installation engine PWB EEPROM.
Defective engine PWB.
Device damage of EEPROM.
0160 Backup memory data error (engine PWB) Defective flash memory.
Defective engine PWB.
0170 Billing counting error
A checksum error is detected in the main and engine backup memories for the billing counters. 		Data damage of EEPROM.
Defective PWB.
0180 Machine number mismatch
Machine number of main and engine does not match. 		Data damage of EEPROM.
0320 I/O CPU communication error
A communication error is detected 10 times in succession. 		Defective PWB.
0630 DMA error DMA transmission of image data does not complete within the specified period of time. Poor contact in the connector terminals. Defective main PWB.
0800 Image processing error
JAM05 is detected twice. 		Defective main PWB.
0830 FAX control PWB flash program area checksum error
A checksum error occurred with the program of the FAX control PWB. 		Defective FAX software.
Defective FAX control PWB.
0840 Faults of RTC
The time is judged to go back based on the comparison of the RTC time and the current time or five years or more have passed. 		The battery is disconnected from the main PWB.
Defective main PWB.
0870 FAX control PWB to main PWB high capacity data transfer error
High-capacity data transfer between the FAX control PWB and the main PWB of the machine was not normally performed even if the data transfer was retried the specified times. 		Improper installation FAX control PWB.
Defective FAX control PWB or main PWB.
0920 Fax file system error
The backup data is not retained for file system abnormality of flash memory of the FAX control PWB. 		Defective FAX control PWB.
1010 Lift motor error
After cassette 1 is inserted, lift sensor does not turn on within 12 s. This error is detected four times successively. 		Defective bottom plate elevation mechanism in the cassette.
Defective connector cable or poor contact in the connector.
Defective drive transmission system of the lift motor.
Defective lift motor.
Defective engine PWB.
1020 PF lift motor error (paper feeder)
After cassette 2 is inserted, PF lift sensor 1 does not turn on within 12 s. This error is detected four times successively. 		Defective bottom plate elevation mechanism in the cassette.
Defective connector cable or poor contact in the connector.
Defective drive transmission system of the PF lift motor 1.
Defective PF lift motor 1.
Defective PF main PWB.
1030 PF lift motor error (paper feeder)
After cassette 3 is inserted, PF lift sensor 2 does not turn on within 12 s. This error is detected four times successively. 		Defective bottom plate elevation mechanism in the cassette.
Defective connector cable or poor contact in the connector.
Defective drive transmission system of the PF lift motor 2.
Defective PF lift motor 2.
Defective PF main PWB.
1800 Paper feeder communication error
A communication error is detected 10 times in succession. 		Improper installation paper feeder.
Defective connector cable or poor contact in the connector.
Defective engine PWB.
Defective PF main PWB.
1900 Paper feeder EEPROM error
When writing the data, the write data and the read data is not continuously in agreement 5 times. 		Defective PF main PWB.
Device damage of EEPROM.
2000 Main motor steady-state error
Stable OFF is detected for 1 s continuously after main motor stabilized. 		Defective connector cable or poor contact in the connector.
Defective drive transmission system of the main motor.
Defective main motor.
Defective engine PWB.
2010 Main motor drive error
The main motor is not stabilized within 2 s after driving starts. 		Defective connector cable or poor contact in the connector.
Defective drive transmission system of the main motor.
Defective main motor.
Defective engine PWB.
2600 PF drive motor error (paper feeder)
When the PF drive motor is driven, error signal is detected continuously for 1 s. 		Defective connector cable or poor contact in the connector.
Defective drive transmission system of the PF drive motor.
Defective PF drive motor.
Defective PF main PWB.
3100 ISU home position error
The home position is not correct when the power is turned on or at the start of copying using the table. 		Defective connector cable or poor contact in the connector.
Defective home position sensor.
Defective ISU motor.
Defective CCD PWB.
Defective engine PWB.
3200 Exposure lamp error
When input value at the time of exposure lamp illumination does not exceed the threshold value between 5 s. 		Defective connector cable or poor contact in the connector.
Defective exposure lamp.
Defective CCD PWB.
Defective main PWB.
3500 Communication error between scanner and ASIC
An error code is detected 3 times in succession. 		Defective connector cable or poor contact in the connector.
Defective CCD PWB.
Defective main PWB.
3600 Scanner sequence error Defective main PWB or engine PWB.
4000 Polygon motor synchronization error
The polygon motor is not stabilized within 10 s after driving starts. 		Defective connector cable or poor contact in the connector.
Defective polygon motor.
Defective engine PWB.
4010 Polygon motor steady-state error
Stable OFF is detected for 1 s continuously after polygon motor stabilized. 		Defective connector cable or poor contact in the connector.
Defective polygon motor.
Defective engine PWB.
4100 BD initialization error
BD is not detected within 1 s after polygon motor stabilized. 		Defective connector cable or poor contact in the connector.
Defective APC PWB.
Defective BD PWB.
Defective main PWB.
4700 VIDEO ASIC device error Defective connector cable or poor contact in the connector.
Defective main PWB or engine PWB.
6000 Broken fuser heater wire
The detected temperature of fuser thermistor does not reach the specified temperature (ready indication temperature) after the fuser heater has been turned on continuously for 60 s in warming up. The fusing temperature at 7 seconds and 20 seconds since fuser temperature control has occurred differs by 43°C/109.4°F or less. 		Defective connector cable or poor contact in the connector.
Deformed connector pin.
Defective triac.
Fuser thermostat triggered.
Broken fuser heater wire.
Defective engine PWB.
6000
6020
6030
6050 		Broken fuser heater wire
Abnormally high fuser thermistor temperature Broken fuser thermistor wire Abnormally low fuser thermistor temperature 		Deformed connector pin.
Defective triac.
6020 Abnormally high fuser thermistor temperature
The fuser thermistor detects a temperature higher than 230°C/446°F continuously for 40 ms. High fuser temperature signal detects a temperature of 255°C/491°F continuously for 40 ms. 		Deformed connector pin.
Defective triac.
Shorted fuser thermistor.
Defective engine PWB.
6030 Broken fuser thermistor wire
A/D value of the fuser thermistor exceeds 251 bit continuously for 7 s during warming up. 		Defective connector cable or poor contact in the connector.
Deformed connector pin.
Defective triac.
Defective fuser thermistor.
Defective engine PWB
6050 Abnormally low fuser thermistor temperature
As the stable temperature has reached the second time, the decrease in the fuser thermistor temperature of 60°C/140°F or greater is detected for one second. 		Deformed connector pin.
Defective triac.
Defective fuser thermistor
Defective fuser heater.
Defective engine PWB.
6400 Zero-cross signal error
While fuser heater control is performed, the zero-cross signal is not input within 3 s. 		Defective connector cable or poor contact in the connector
Defective power source PWB or engine PWB.
7800 Broken external thermistor wire
The thermistor output value is 0.3 V or less. 		Defective connector cable or poor contact in the connector.
Defective temperature sensor.
7810 Short-circuited external thermistor wire
The thermistor output value is 3 V or more. 		Defective connector cable or poor contact in the connector.
Defective temperature sensor.
7900 Drum unit EEPROM error
No response is issued from the device in reading/writing for 5 ms or more and this problem is repeated five times successively. Mismatch of reading data from two locations occurs eight times successively. Mismatch between writing data and reading data occurs eight times successively. 		Defective connector cable or poor contact in the connector.
Defective drum unit.
7910 Developer unit EEPROM error
No response is issued from the device in reading/writing for 5 ms or more and this problem is repeated five times successively. Mismatch of reading data from two locations occurs eight times successively. Mismatch between writing data and reading data occurs eight times successively. 		Defective connector cable or poor contact in the connector.
Defective developer unit.
8030 Tray upper limit detection problem (document finisher)
When the tray elevation motor raises a tray, the ON status of the tray upper limit sensor is detected. 		Defective connector cable or poor contact in the connector.
Defective tray upper limit sensor, paper surface sensor 1/2.
Defective DF main PWB.
8040 Belt problem (document finisher)
The belt sensor does not turn on/off within specified time of the belt solenoid turning on. 		Defective connector cable or poor contact in the connector.
Defective belt sensor.
Defective belt solenoid.
Defective DF main PWB.
8140 Tray elevation motor problem (document finisher)
The tray low limit sensor or paper surface sensor 1/2 cannot be detected to be on within 10 s since the tray elevation motor is activated. 		Defective connector cable or poor contact in the connector.
Defective connector cable or poor contact in the connector.
The tray elevation motor malfunctions.
Defective tray lower limit sensor, paper surface sensor 1/2.
Defective DF main PWB.
8210 Stapler problem (document finisher)
Jam 7012 or 7023 is indicated. 		Defective connector cable of staple or poor contact in the connector.
The stapler is blocked with a staple.
The stapler is broken
Defective DF main PWB.
8320 Adjustment motor 2 problem (document finisher)
The adjustment sensor 2 does not turn on/off within specified time of the adjustment motor 2 turning on. 		Defective connector cable or poor contact in the connector.
Defective adjustment sensor 2.
Defective adjustment motor 2.
Defective DF main PWB.
8330 Adjustment motor 1 problem (document finisher)
The adjustment sensor 1 does not turn on/off within specified time of the adjustment motor 1 turning on. 		Defective connector cable or poor contact in the connector.
Defective adjustment sensor 1.
Defective adjustment motor 1.
8350 Roller motor problem (document finisher)
The roller sensor does not turn on/off within specified time of the roller motor turning on. 		Defective DF main PWB.
Defective connector cable or poor contact in the connector.
Defective roller sensor.
Defective roller motor.
Defective DF main PWB.
8360 Slide motor problem (document finisher)
The slide sensor does not turn on/off within specified time of the slide motor turning on. 		Defective connector cable or poor contact in the connector.
Defective slide sensor.
Defective slide motor.
Defective DF main PWB.
8460 EEPROM problem (document finisher)
Reading from or writing to EEPROM cannot be performed. 		Defective EEPROM or DF main PWB.
8800 Document finisher communication error
A communication error is detected 10 times in succession. 		Defective connector cable or poor contact in the connector
Defective DF main PWB.
Defective engine PWB.
8830 Bridge communication error (document finisher)
A communication error is detected 10 times in succession. 		Defective connector cable or poor contact in the connector.
Defective bridge PWB.
Defective engine PWB.
8990 Document finisher communication error Defective connector cable or poor contact in the connector.
Defective DF main PWB.
Defective bridge PWB.
9000 Document processor communication error
A communication error is detected 10 times in succession. 		Defective connector cable or poor contact in the connector.
Defective DP main PWB.
9060 DP EEPROM error Read and write data does not match. Data in the specified area of the backup memory does not match the specified values. Defective DP main PWB.
Device damage of EEPROM.
9500 BRU communication error IPU PWB error
9510 BRU PWB error IPU PWB error
9520 BRU PWB data error IPU PWB error
F000 Main PWB — operation panel PWB communication error Defective main PWB.
Defective operation panel PWB.
F010 Main PWB checksum error Defective main PWB.
F040 Main PWB — print engine communication error Defective main PWB.
Defective engine PWB.
F050 Print engine ROM checksum error Defective engine PWB.
Источник

  1. 04-14-2014


    #1

    kibbs is offline


    Trusted Tech

    50+ Posts

    Rep Power
    22

    Kyocera FS C8025 MFP Jam 9000 in DP

    Dear Friends
    Long time onwards i am facing the DP Jam 9000. i dono why?? when i copy an file it completed and then it giving jam…i notice motors rotate continuosly after copies overd and jam code appearing Jam 9000…. paper not exit in proper down tray exit… paper exit in first exit tray(RADF)… for view i attachment exit section.. please help me for this issue.. i have two machine in the same complaint.. i attached the picture of paper exit section

    Thanks & Regards

    Raja

  2. 04-14-2014


    #2

    Re: Kyocera FS C8025 MFP Jam 9000 in DP

Источник

Заправка картриджей, ремонт оргтехники в Москве

добавил фотографию

22 октября в 20:57

  • Пожаловаться
  • Загрузить оригинал

Ремонт Kyocera FS-6525, ошибка 9000 (замятие оригинала в ADF)

Ремонт Kyocera FS-6525, ошибка 9000 (замятие оригинала в ADF)

Нравится

    Предыдущие комментарии

    Источник

    Понравилась статья? Поделить с друзьями:
  • Jam 4218 kyocera ecosys m2040dn код ошибки
  • Jam 4201 ошибка kyocera 2035
  • Jam 4020 ошибка kyocera
  • Jam 0511 ошибка kyocera
  • Jam 0509 kyocera ошибка