Id ошибки hostmemorylow - Решение и исправление самых разных ошибок на TopOshibok.ru

davidhamond: Posts: 1; Joined: 28. Sep 2010, 00:58; Primary OS: MS Windows 7; VBox Version: PUEL; Guest OSses: Windows Server 2008 — 64 bit

hostmemorylow — host memory low

Base system:
Windows 7 (64 bit) box with 12 Gig of RAM, 6 core 980X processor.
Virtual Box 3.2.8 installed. Under the «System» — «Base Memory» section of the VB instance (Win Server 2008 — 64 bit) I can put 5009 MB and it works fine … when I go to 5010 or beyond I get:

Error ID: HostMemoryLow
Severity: Non-Fatal Error (but really, it is fatal since it won’t go beyond that point)

My Win 7 OS and programs are using about 2 to 3 GIG (in general) which leaves about 9 gig available.

Ugh, any suggestions? — Thanks!

johnnyabc: Posts: 4; Joined: 27. Nov 2010, 01:15; Primary OS: MS Windows 7; VBox Version: PUEL; Guest OSses: Windows 2003

Re: hostmemorylow — host memory low

Post

by johnnyabc » 27. Nov 2010, 01:23

My host system is Windows 7 64-bit with 6GB physical memory.

I’m encountering the same message when I attempt to install Windows 2003 x32 in a Virtualbox environment at 2GB Ram or 3GB ram. The system pauses before the virtual instance is formatted and I can’t proceed. If I use 512mb however, I can do a full Windows 2003 install and access the new desktop. If I turn off the instance, change the settings to 2GB ram, the virtual instance pauses during the boot.

Alternatively, when I used Windows Virtual PC, I can do a full install of Windows 2003 using 3GB ram. Then, if I attach the VPC instance to Virtual Box, it continues to work 3GB memory assigned.

My current process is to create the instance in VPC, and switch it over VBox (because VBox performance otherwise is so much better). Is there something I can do to install Windows 2003 in VirtualBox?

Sasquatch: Volunteer; Posts: 17800; Joined: 17. Mar 2008, 13:41; Primary OS: Debian other; VBox Version: PUEL; Guest OSses: Windows XP, Windows 7, Linux; Location: /dev/random

Re: hostmemorylow — host memory low

Post

by Sasquatch » 27. Nov 2010, 16:14

You all have plenty of physical RAM left to do what you want to do? The error would only come up if you are actually running out of RAM. But it’s odd that on a system that didn’t change, VPC can use 3 GB, but VB can’t. Maybe it allocates memory differently too, I don’t know. But keep task manager running on the performance tab to monitor memory consumption.

johnnyabc: Posts: 4; Joined: 27. Nov 2010, 01:15; Primary OS: MS Windows 7; VBox Version: PUEL; Guest OSses: Windows 2003

Re: hostmemorylow — host memory low

Post

by johnnyabc » 27. Nov 2010, 23:03

An update. After a fresh reboot of the system, when I use Virtualbox to start the VPC-built instance I once again get the hostmemorylow error and the system pauses. If I try Virtual PC at this point, the VPC-built instance fails with an error indicating too many host system processes are being used.

If I reboot my host system, then use VirtualPC to start up the VPC-built instance. It loads fine. If I then shut VirtualPC down and restart the same VPC-Built instance using VirtualBox, the VPC file loads with no issues.

I have plenty of RAM (6GB) in my host system and while the virtual instances do run, I can run several other concurrent applications with no issues. Task manager doesn’t show any problems.

It seems that the issue is with Virtualbox’s initial allocation of the memory if it runs after a reboot. Pre-running VPC before Virtualbox seems to allow Virtualbox to run a an instance with 3GB RAM fine.

johnnyabc: Posts: 4; Joined: 27. Nov 2010, 01:15; Primary OS: MS Windows 7; VBox Version: PUEL; Guest OSses: Windows 2003

Re: hostmemorylow — host memory low

Post

by johnnyabc » 1. Dec 2010, 01:07

Well. I’m pretty much stuck now trying to get a 3GB 64-bit Windows OS guest running in a Virtual environment on Windows 7 with 6GB RAM.

Virtualbox gives me this hostmemorylow error and pauses on any instance I create that is more an about a GB of RAM.
Virtual PC won’t support 64-bit guests.
VMWare gives a message that there’s an inconsistancy reading the vdmk file for virtual machines over about a GB of RAM.

The issues with Virtualbox and VMWare seem to be common for others, so I’ve ruled out hardware. I also tried cachset (mentioned in another post) to no benefit.

I’d like to be able to use Virtualbox for this. Any suggestions?

00:00:18.976 PGM: Failed to procure handy pages; rc=VERR_NO_MEMORY rcAlloc=VINF_SUCCESS rcSeed=VINF_SUCCESS cHandyPages=0x8
00:00:18.976 cAllPages=0x81444 cPrivatePages=0x56fc0 cSharedPages=0x0 cZeroPages=0x2a460
00:00:18.976 GMM: Statistics:
00:00:18.976 Allocated pages: 55bc4
00:00:18.976 Maximum pages: 8009c
00:00:18.976 Ballooned pages: 0
00:00:18.979 PGM: Failed to procure handy pages; rc=VERR_NO_MEMORY rcAlloc=VINF_SUCCESS rcSeed=VINF_SUCCESS cHandyPages=0x8
00:00:18.979 cAllPages=0x81444 cPrivatePages=0x56fc0 cSharedPages=0x0 cZeroPages=0x2a460
00:00:18.979 GMM: Statistics:
00:00:18.979 Allocated pages: 55bc4
00:00:18.979 Maximum pages: 8009c
00:00:18.979 Ballooned pages: 0
00:00:18.979 VM: Raising runtime error ‘HostMemoryLow’ (fFlags=0x2)
00:00:18.979 Changing the VM state from ‘RUNNING’ to ‘SUSPENDING’.
00:00:19.024 Changing the VM state from ‘SUSPENDING’ to ‘SUSPENDED’.
00:00:19.033 Console: VM runtime error: fatal=false, errorID=HostMemoryLow message=»Unable to allocate and lock memory. The virtual machine will be paused. Please close applications to free up memory or close the VM»
00:03:04.130 ERROR [COM]: aRC=VBOX_E_INVALID_VM_STATE (0x80bb0002) aIID={6375231a-c17c-464b-92cb-ae9e128d71c3} aComponent={Console} aText={Invalid machine state Paused when checking if the guest entered the ACPI mode)} aWarning=false, preserve=false

gwaddell-ADPBusiness: Posts: 7; Joined: 26. Jan 2012, 18:56; Primary OS: MS Windows 7; VBox Version: OSE other; Guest OSses: windows 7

Re: hostmemorylow — host memory low

Post

by gwaddell-ADPBusiness » 27. Jan 2012, 17:32

I’m having the same issue on a Toshiba laptop running Windows 7 64 bit with 6GB Ram. If I try to run a VM with over 1024MB RAM, I get the error. If I try to Run two machines of 1 GB concurrently I get the same error on the second machine to boot up.

Running the VMBox on it’s own with no VM running and the normal outlook etc running in the background, task Manager puts Memory usuage at 1.62 GB So I would have thought that the other 4.3 GB or so I had would be able to run a VM with over 1 GB RAM!!! I have a Quad Core processor that is sitting at about 1% usuage

I have version of VMbox 4.1.8 r75467

gwaddell-ADPBusiness: Posts: 7; Joined: 26. Jan 2012, 18:56; Primary OS: MS Windows 7; VBox Version: OSE other; Guest OSses: windows 7

Re: hostmemorylow — host memory low

Post

by gwaddell-ADPBusiness » 31. Jan 2012, 14:38

Hi, I have a solution, well it worked for me….

I had read other forum posts about ensuring hardware virtualisation was enabled and I checked on my machine and it was. BUT I went back into the BIOS and double checked and although it was enabled, it was only enabled for something called VT-A I changed this setting to one that said VT-A & VT-D supported and now not only can I run over a 1 GB Ram guest, I can run a 2GB ram guest and a 1GB ram guest concurrently too.

marcanddonna: Posts: 1; Joined: 1. Feb 2012, 02:29; Primary OS: MS Windows 7; VBox Version: PUEL; Guest OSses: Windows 7 Professional, 64 bit

Re: hostmemorylow — host memory low

Post

by marcanddonna » 1. Feb 2012, 02:40

I am also running into this problem. Windows 7 Professional 64 bit on a Toshiba laptop with 6 GB physical memory.
VirtualBox 4.1.8 installed. Tried to create a VM with 2 GB memory and install Windows 7 Professional 64 bit on the VM.
The Windows installer gets part-way through, then the VM hangs with an «out of host memory» error.
The log shows:
00:01:07.191 PGM: Failed to procure handy pages; rc=VERR_NO_MEMORY rcAlloc=VINF_SUCCESS rcSeed=VINF_SUCCESS cHandyPages=0x8
00:01:07.191 cAllPages=0x67e4b cPrivatePages=0x58f91 cSharedPages=0x0 cZeroPages=0xee91
I am attaching the log file to this message.

I saw the message about checking to ensure that hardware virtualization support is enabled in the BIOS—it is (VT-x for Intel processors).

It does seem to work with 1 GB of memory, although I want to use more so I can effectively run Oracle and OBIEE in the VM.

I did not see this in the BugTracker as a known defect.

(Additional information: I tried it on my desktop machine—AMD Athlon II X2 processor, 4 GB physical memory—and was able to create a 2 GB virtual machine with no trouble. The laptop had close to 4 GB physical memory free when I tried to create the 2 GB VM.)

Suggestions for dealing with this problem would be very welcome.

Attachments

VBox.log: (48.75 KiB) Downloaded 388 times

AtlantaRene: Posts: 3; Joined: 3. Feb 2012, 00:34; Primary OS: MS Windows 7; VBox Version: PUEL; Guest OSses: Fedora 10

Re: hostmemorylow — host memory low

Post

by AtlantaRene » 3. Feb 2012, 01:25

I too had the problem outlined above. I am running Windows 7 64 bit host OS (with all the latest patches and the latest nVidia drivers), my guest OS is a build of Fedora. I am getting the errors as outlined in the first post on this thread. My system had 5GB of RAM. I finally decided to pull out my extra memory to reduce my memory to 4GB of RAM. It resolved my problem. I was wondering if others on this thread could confirm the behavior.

I suspect it is a mathematical problem (e.g. int32 vs. int64 or signed vs. unsigned) related to the amount of free RAM in the host OS at the time the guest OS is launched. (Just a theory)

I have attached a zip file containing my before and after vbox.log if the developer need to research the issue.

Regards,

Rene

Attachments

before-after.zip: before-after-vbox.log.zip; (27.16 KiB) Downloaded 246 times

HelgeK: Posts: 1; Joined: 12. Mar 2012, 14:07

Re: hostmemorylow — host memory low

Post

by HelgeK » 12. Mar 2012, 14:14

I also have the problem that VirtualBox somehow cannot use memory that is available. My OS is Windows 7 x64 with 8 GB RAM. I cannot start a second virtual machine although Task Manager reports 4273 MB as «available» and 2592 as «free». The VM I am trying to start is configured with 1792 MB RAM.

I have attached the files vbox.log and vbox.png, copied at the time the error message was displayed.

Attachments

: VBox.png (2.01 KiB) Viewed 34792 times

VBox.log: (49.47 KiB) Downloaded 171 times

Bikky: Posts: 7; Joined: 1. May 2012, 11:21

Re: hostmemorylow — host memory low

Post

by Bikky » 1. May 2012, 11:33

Any solutions on this yet?
VBOX 4.1.8 r75467
Recognises all 6GB RAM

Host Win7 pro x64
6GB RAM
Intel Core 2 Duo (4core)

For months I’ve ran 2 guests on this simultaneously with no issues.
g1
win7 pro x86
1gb RAM

g2
winxp pro x86
768 RAM

Now suddenly when I try to start the xp guest i get host out of memory. There have been no system updates or oracle updates for at least 2 weeks. Last week when used all was well. My system is currently only using 3.2GB RAM with 1 guest running, when the 2nd guest loads it goes no higher than 4.3GB in use. I stupidly deleted the xp image as I thought it was an image problem and can’t re-intsall for the exact same reason.

Current attempt when g1 running, g2 with DSL on 256ram loads, g2 to install an os with 678ram, total host ram in use reaches 3.7gb still fails.

Bikky: Posts: 7; Joined: 1. May 2012, 11:21

Re: hostmemorylow — host memory low

Post

by Bikky » 1. May 2012, 12:00

update, when i try guest 2 at 512 ram it fails.

*edit* upgraded to 4.1.14 and still have the issue…. but with DSL pre-installed and ram upped to 512 and 1gig its fine.

Bikky: Posts: 7; Joined: 1. May 2012, 11:21

Re: hostmemorylow — host memory low

Post

by Bikky » 9. May 2012, 10:52

I’ve since discovered I can use any combination of 1 or more guests as long as the total assigned memory is less than 1325mb.

1 guest on 1330mb crashes,
1 guest on 1320mb works
2 guests or more on 1330mb or more 2nd one to load crashes
2 guests or more on 1320mb or less and all work fine.

silvest: Posts: 1; Joined: 9. May 2012, 12:58

Re: hostmemorylow — host memory low

Post

by silvest » 9. May 2012, 13:29

AtlantaRene wrote:I too had the problem outlined above. I am running Windows 7 64 bit host OS (with all the latest patches and the latest nVidia drivers), my guest OS is a build of Fedora. I am getting the errors as outlined in the first post on this thread. My system had 5GB of RAM. I finally decided to pull out my extra memory to reduce my memory to 4GB of RAM. It resolved my problem. I was wondering if others on this thread could confirm the behavior.

I suspect it is a mathematical problem (e.g. int32 vs. int64 or signed vs. unsigned) related to the amount of free RAM in the host OS at the time the guest OS is launched. (Just a theory)

I have attached a zip file containing my before and after vbox.log if the developer need to research the issue.

Regards,

Rene

I can confirm this behavior. I have been running smoothly with the default 4GB ram, then added an extra 4GB and started incurring in the problem.
I also attach the log hoping that a solution can be found by the developers.

Regards,
Luca

Attachments

VBoxSVC.log: (6.39 KiB) Downloaded 193 times

Источник

В ознакомительных целях поставил Ubuntu 7.10 на VirtualBox — не хочет грузиться — папуаска :quest:. В начале загрузки (когда градусник начинает бегать) выскакивает сообщение:

Unable to allocate and lock memory. The virtual machine will be paused. Please close applications to free up memory or close the VM..

ID ошибки:
HostMemoryLow
Важность:
Нефатальная ошибка

Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp.050301-1521)
Language: Russian (Regional Setting: Russian)
System Manufacturer: INTELR
System Model: AWRDACPI
BIOS: Phoenix — AwardBIOS v6.00PG
Processor: Intel(R) Pentium(R) 4 CPU 2.40GHz
Memory: 256MB RAM
Page File: 356MB used, 260MB available

Общие
Имя Ubuntu 7.10
Тип ОС Linux 2.6
Основная память 394 Мб
Видеопамять 8 Мб
Порядок загрузки Дискета, CD/DVD-ROM, Жесткий диск
ACPI Включен
IO APIC Выключен
*
Жесткие диски
Первичный мастер Ubuntu 7.10.vdi [Обычный, 2,03 GB]
*
CD/DVD-ROM Образ ubuntu-7.10-desktop-i386.iso
*
Дискета Не подключена

Сеть Адаптер 0
NAT

Общие папки Нет

Удаленный дисплей Выключен

добавь в машину еще оперативки, 256 это очень мало. можно еще увеличить файл подкачки, но это будет очень тормознуто
или в виртуальной машине уменьши до 128, вроде для убунты этого должно хватить.

ЗЫ очень хочется надеяться, что я правильно понял конфигурацию компа.

Memory: 256MB RAM
Page File: 356MB used, 260MB available

Запускать при таком количестве оперативной памяти виртуальные машины-это мазохизм.Ставь 1 гиг оперативки и все заработает.

Тоже попытался. Поставил на виртуальную машину 512 Мб оперативки, 8 Гб на систему. Ubuntu 7.10 при установке зависает на: установка системы 82% — настраивается atp, идет просмотр зеркала архива. В чем может быть проблема?

Попробуйте отключить поддержку сети в виртуалбоксе на время установки Убунты.

Спасибо, установил. Но разобраться в нем новичку тяжеловато. :(Ставил в основном чтобы посмотреть визуальные эффекты.

На форуме forum.ubuntu.ru решение всех вопросов.Если что не понятно,юзайте поиск и не стесняйтесь задавать там вопросы.
Что касается эффектов. То виртуалка не даст вам полностью насладиться этой системой.Ставьте на отдельный раздел,включайте полные эффекты и виндузятники сдохнут от зависти,если продемонстрируте им компиз в полную силу.Виста там и рядом не валялась.

Он просто ищет репозитории, нужно во время установки отказаться от настройки сети, тем более это можно сделать позже через графическую оболочку

У меня такая проблема: внутри гостевой операц. системы (в моем случае win XP) не видны shared folders хотя все «снаружи» подключено . подскажите кто сталкивался

Они вообще-то должны в сетевом окружении появится

Точно — памяти надо 2 Гига
А потом аналогичные глюки могут уйти со сменой версии Виртуалбокса.
Также попробуй отрубить поддержку ЮСБ и флоповода

Добавлено через 4 минуты
У меня такая проблема: внутри гостевой операц. системы (в моем случае win XP) не видны shared folders хотя все «снаружи» подключено . подскажите кто сталкивался

А как ты именно их в ХРени искал?
Дело в том, что общие папки скидываются в отдельную группу с названием VBOXSHARE, если не ошибаюсь.
И чтобы в ХРени (как и в Висте) до них добраться, надо кучу кликов сделать.
Почитай соответствующий раздел помощи по Боксу и подключи папку как сетевой диск ручками по инструкции.
Авось увидишь.

короче я создаю машину через VirtualBox и мне выдаётса такоэ сообщениэ
Unable to allocate and lock memory. The virtual machine will be paused. Please close applications to free up memory or close the VM..

ID ошибки:
HostMemoryLow
Важность:
Нефатальная ошибка

что ето значит я не могу сделать нормальную машину помогите

Примечание. APC является устаревшим модулем и на текущий момент не рекомендуется к установке и использованию для PHP версий 5.4 и выше. Вместо него лучше взять xCache 3.0+ или использовать коробочный оптимизатор. Его можно использовать только с 5.3.

Что такое APC?

APC (Alternative PHP Cache) или Акселератор PHP — это расширение для PHP, основное назначение которого — увеличение производительности интерпретатора при обработке сценариев путем кэширования их байт-кода.

В этой статье мы поговорим, как решить одну из самых популярных ошибок с APC (Alternative PHP Cache) — Unable to allocate memory for pool. Внешне она выглядит следующим образом

Смысл в том, что APC сообщает, что у него кончилась память для кеша. На самом деле это не ошибка, а предупреждение. Существует три способа убрать данное предупреждение.

Способ #1 (рекомендованный)

Используйте современный оптимизатор — xCache, либо встроенный в PHP (начиная с версии 5.5). И APC лучше выключить, потому что он устарел несколько лет назад.

Способ #2

Увеличим в php.ini значение apc.shm_size, или обращаемся к хостеру и говорим, что нужно больше памяти.

Плюсы: повышение производительности вашего сайта.

Минусы: расходуется много памяти.

Как показывает практика, с этим нужно быть осторожнее. Есть такая особенность, что при большом shm_size неконтролируемо вырастает ресурсопотребление процесса, после чего php либо «съедает» всю доступную память, либо неконтролируемо падает.

Способ #3

Выключите APC. Допишите в .htaccess php_flag apc.cache_by_default Off

К сожалению, не все хостеры позволяют самостоятельно отключить APC с помощью .htaccess. В таком случае вам необходимо обращаться непосредственно к хостеру.

Минусы: возможно заметное снижение производительности.

Источник

Host: Windows 7 64x bit, 6 GB of RAM
Guest: Red Hat 64x bit

Host machine resources without running any VMs:

[Case I] Guest machine with 2 GB memory

When I run a memory consuimg process on the guest I get a fatal error from VirtulBox (it’s fatal because it crashs the system)

 Error ID: HostMemoryLow
 Severity: Non-Fatal Error

Host memory during the error (MB):

 Total: 6002
 Cached: 2149
 Available: 2133
 Free: 9

Afaik cached memory has inactive data that are unused or already replicated in swap and system should be able to free it in need, and modern OSs keep cached memory to get best useful of larger memories.
My guess is that the cause of the problem is either windows can’t free large bulk of memory in a sudden, or that VirtualBox doesn’t consider the cached memory as available for allocation and returns error as soon as the free memory is full (but still the cached).

[Case II] Guest with lazy memory allocation off

When turning off lazy memory allocation so the hypervisor allocats the full VM memory at its startup using:

VBoxManage setextradata "VM_name" VBoxInternal/RamPreAlloc 1

I faced even wrose scenario that the VM refuses to start with more than 1280 MB and shows error that no enough memory in host machine to allocate, and windows free memory drops to 8 for a moment but still the cached memory the same (reserves high amount of memory) and windows never free it!

 The fatal variant of VINF_EM_NO_MEMORY (VERR_EM_NO_MEMORY)
 Result Code: E_FAIL (0x80004005)
 Component: Console
 Interface: IConsole {8ab7c520-2442-4b66-8d74-4ff1e195d2b6}

VirtualBox isn’t able to allocate more than 1280 MB memory regardless to the free or cached memory!

Источник

My VM paused in between with the below error

Unable to allocate and lock memory. The virtual machine will be paused. Please close applications to free up memory or close the VM.

Error ID: HostMemoryLow
Severity: Non-Fatal Error

How to resolve this?

vito Edited question March 5, 2021

This error is thrown because the host memory is not sufficient for the VM to run. Close all the applications running on your host machine and just run the VM. The best option will be to increase the RAM of your system and further increase the RAM provided to the VM.

Источник

Error ID: HostMemoryLow
Severity: Non-Fatal Error (but really, it is fatal since it won’t go beyond that point)

My Win 7 OS and programs are using about 2 to 3 GIG (in general) which leaves about 9 gig available.

Ugh, any suggestions? — Thanks!

Re: hostmemorylow — host memory low

Post by squall leonhart » 29. Sep 2010, 05:50

Re: hostmemorylow — host memory low

Post by johnnyabc » 27. Nov 2010, 01:23

My host system is Windows 7 64-bit with 6GB physical memory.

Alternatively, when I used Windows Virtual PC, I can do a full install of Windows 2003 using 3GB ram. Then, if I attach the VPC instance to Virtual Box, it continues to work 3GB memory assigned.

My current process is to create the instance in VPC, and switch it over VBox (because VBox performance otherwise is so much better). Is there something I can do to install Windows 2003 in VirtualBox?

Re: hostmemorylow — host memory low

Post by Sasquatch » 27. Nov 2010, 16:14

Read the Forum Posting Guide before opening a topic.
VirtualBox FAQ: Check this before asking questions.
Online User Manual: A must read if you want to know what we’re talking about.
Howto: Install Linux Guest Additions
Howto: Use Shared Folders on Linux Guest
See the Tutorials and FAQ section at the top of the Forum for more guides.
Try searching the forums first with Google and add the site filter for this forum.
E.g. install guest additions site:forums.virtualbox.org

Retired from this Forum since OSSO introduction.

Re: hostmemorylow — host memory low

Post by johnnyabc » 27. Nov 2010, 23:03

I have plenty of RAM (6GB) in my host system and while the virtual instances do run, I can run several other concurrent applications with no issues. Task manager doesn’t show any problems.

Re: hostmemorylow — host memory low

Post by johnnyabc » 1. Dec 2010, 01:07

Well. I’m pretty much stuck now trying to get a 3GB 64-bit Windows OS guest running in a Virtual environment on Windows 7 with 6GB RAM.

The issues with Virtualbox and VMWare seem to be common for others, so I’ve ruled out hardware. I also tried cachset (mentioned in another post) to no benefit.

I’d like to be able to use Virtualbox for this. Any suggestions?

Re: hostmemorylow — host memory low

Post by gwaddell-ADPBusiness » 27. Jan 2012, 17:32

Running the VMBox on it’s own with no VM running and the normal outlook etc running in the background, task Manager puts Memory usuage at 1.62 GB So I would have thought that the other 4.3 GB or so I had would be able to run a VM with over 1 GB RAM. I have a Quad Core processor that is sitting at about 1% usuage

I have version of VMbox 4.1.8 r75467

Re: hostmemorylow — host memory low

Post by gwaddell-ADPBusiness » 31. Jan 2012, 14:38

Hi, I have a solution, well it worked for me.

Re: hostmemorylow — host memory low

Post by marcanddonna » 1. Feb 2012, 02:40

I saw the message about checking to ensure that hardware virtualization support is enabled in the BIOS—it is (VT-x for Intel processors).

It does seem to work with 1 GB of memory, although I want to use more so I can effectively run Oracle and OBIEE in the VM.

I did not see this in the BugTracker as a known defect.

https://amdy.su/wp-admin/options-general.php?page=ad-inserter.php#tab-8

Suggestions for dealing with this problem would be very welcome.

Re: hostmemorylow — host memory low

Post by AtlantaRene » 3. Feb 2012, 01:25

Id ошибки hostmemorylow важность нефатальная ошибка

Unable to allocate and lock memory. The virtual machine will be paused. Please close applications to free up memory or close the VM..

ID ошибки:
HostMemoryLow
Важность:
Нефатальная ошибка

Сеть Адаптер 0
NAT

Общие папки Нет

Удаленный дисплей Выключен

ЗЫ очень хочется надеяться, что я правильно понял конфигурацию компа.

Memory: 256MB RAM
Page File: 356MB used, 260MB available

Попробуйте отключить поддержку сети в виртуалбоксе на время установки Убунты.

Они вообще-то должны в сетевом окружении появится

ID ошибки:
HostMemoryLow
Важность:
Нефатальная ошибка

что ето значит я не могу сделать нормальную машину помогите

Что такое APC?

Способ #1 (рекомендованный)

Способ #2

Увеличим в php.ini значение apc.shm_size, или обращаемся к хостеру и говорим, что нужно больше памяти.

Плюсы: повышение производительности вашего сайта.

Минусы: расходуется много памяти.

Способ #3

Выключите APC. Допишите в .htaccess php_flag apc.cache_by_default Off

Hostmemorylow virtualbox как исправить

Unable to allocate and lock memory. The virtual machine will be paused. Please close applications to free up memory or close the VM..

ID ошибки:
HostMemoryLow
Важность:
Нефатальная ошибка

Сеть Адаптер 0
NAT

Общие папки Нет

Удаленный дисплей Выключен

ЗЫ очень хочется надеяться, что я правильно понял конфигурацию компа.

Memory: 256MB RAM
Page File: 356MB used, 260MB available

Попробуйте отключить поддержку сети в виртуалбоксе на время установки Убунты.

Они вообще-то должны в сетевом окружении появится

VirtualBox — Error (Host Memory Low) #204

After a couple of hours, the VirtualBox for the server came up — but would not proceed with the «Starting Windows» view due to an error. The error detail is «Unable to allocate and lock memory. The virtual machine will be paused. Please close applications to free up memory or close the VM. Error ID: Host Memory Low, Severity: Non-Fatal Error».

I still got 400GB free space in my local disk — my RAM has 4GB capacity. Also, when I’m checking the settings of the VirtualBox, I cant modify the settings for the Motherboard. Its currently eating 4GB in my RAM. That could be the reason why its not booting.

Host System

OS: Windows 10
Packer Version: 1.0.0
Vagrant Version: 2.0.1
VirtualBox Version: 5.1.14

Command Output

Command is still running, but it no longer moved as it is waiting for the Virtual Box to boot.

Источник