Icmp ошибка 0x8007271d

  • Remove From My Forums

  • Вопрос

  • Есть 2 контроллера домена. На первом (PDC) настроена синхронизация времени NTP на маршрутизатор Cisco, на которой поднят сервер NTP.

    По незнанию решил настроить вторичный DC на ту же Cisco.

    w32tm /config /manualpeerlist:192.168.1.254 /syncfromflags:manual /reliable:yes /update 
    net stop w32time 
    net start w32time
    w32tm /resync
    Отправка команды синхронизации на локальный компьютер
    The computer did not resync because no time data was available.

    Итог:
    w32tm /query /source
    Local CMOS Clock

    C:\Windows\system32>w32tm /monitor
     главный DC *** PDC ***[192.168.1.1:123]: 
    ICMP: 1ms delay
    NTP: +0.0000000s offset from SRV001.SMRFMBA.local
    RefID: (unknown) [0xFE01A8C0]
    Stratum: 9
     вторичный DC[[::1]:123]: 
    ICMP: 0ms delay
    NTP: -4.5039986s offset from главный DC

    RefID: ‘LOCL’ [0x4C434F4C]
    Stratum: 1

    Warning:
    Reverse name resolution is best effort. It may not be
    correct since RefID field in time packets differs across
    NTP implementations and may not be using IP addresses.

    C:\Windows\system32>w32tm /query /peers
    #Узлы: 1

    Peer: 192.168.1.254
    State: Active
    Time Remaining: 25.2027319s
    Mode: 1 (Symmetric Active)
    Stratum: 0 (unspecified)
    PeerPoll Interval: 0 (unspecified)
    HostPoll Interval: 6 (64s)

    Как вернуть все как было. Что бы вторичный DC получал время от первичного DC?

Ответы

  • Добавлю еще рекомендуемую
    литературу для обязательного прочтения, и напомню о том, что не важно от используемой Вами среды виртуализации, в настройках виртуальной машины с
    контроллером домена синхронизацию времени необходимо убрать.

    • Предложено в качестве ответа

      9 октября 2013 г. 12:48

    • Помечено в качестве ответа
      Petko KrushevMicrosoft contingent staff
      10 октября 2013 г. 11:13

Источник
  • Remove From My Forums

  • Question

  • could somebody help with the error  (see pic). It is in the lab domain.

    «When you hit a wrong note it’s the next note that makes it good or bad». Miles Davis

Answers

  • Hello,

    Please refer this:

    Configuring Windows Time for Active Directory
    http://tigermatt.wordpress.com/2009/08/01/windows-time-for-active-directory/

    http://technet.microsoft.com/en-us/library/cc794937(v=ws.10).aspx

    Check system logs for any errors and update.

    For others, i have zoomed  the image. 

    Devaraj G | Technical solution architect

    • Marked as answer by

      Wednesday, August 14, 2013 12:21 AM

  • Hello,

    how in detail is your time setup configured? Port 123 UDP MUST be open for time sync.

    If that machine is the PDCEmulator, your screenshot is too small to view, assure it is configured to a NOT domain time source or the local CMOS(not recommended) from the command line with w32tm. There is no need for manual changes in the registry.

    Details about the domain time configuration please see in
    http://msmvps.com/blogs/mweber/archive/2010/06/27/time-configuration-in-a-windows-domain.aspx

    Best regards

    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP — Directory Services
    My Blog: http://msmvps.com/blogs/mweber/

    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

    • Proposed as answer by
      Ace Fekay [MCT]
      Monday, August 12, 2013 10:10 PM
    • Marked as answer by
      pob579
      Wednesday, August 14, 2013 12:21 AM

    • Marked as answer by
      pob579
      Wednesday, August 14, 2013 12:21 AM
Источник
  • Remove From My Forums

  • Question

  • could somebody help with the error  (see pic). It is in the lab domain.

    «When you hit a wrong note it’s the next note that makes it good or bad». Miles Davis

Answers

  • Hello,

    Please refer this:

    Configuring Windows Time for Active Directory
    http://tigermatt.wordpress.com/2009/08/01/windows-time-for-active-directory/

    http://technet.microsoft.com/en-us/library/cc794937(v=ws.10).aspx

    Check system logs for any errors and update.

    For others, i have zoomed  the image. 

    Devaraj G | Technical solution architect

    • Marked as answer by

      Wednesday, August 14, 2013 12:21 AM

  • Hello,

    how in detail is your time setup configured? Port 123 UDP MUST be open for time sync.

    If that machine is the PDCEmulator, your screenshot is too small to view, assure it is configured to a NOT domain time source or the local CMOS(not recommended) from the command line with w32tm. There is no need for manual changes in the registry.

    Details about the domain time configuration please see in
    http://msmvps.com/blogs/mweber/archive/2010/06/27/time-configuration-in-a-windows-domain.aspx

    Best regards

    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP — Directory Services
    My Blog: http://msmvps.com/blogs/mweber/

    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

    • Proposed as answer by
      Ace Fekay [MCT]
      Monday, August 12, 2013 10:10 PM
    • Marked as answer by
      pob579
      Wednesday, August 14, 2013 12:21 AM

    • Marked as answer by
      pob579
      Wednesday, August 14, 2013 12:21 AM
Источник

Понравилась статья? Поделить с друзьями:
  • Icloud ошибка при подключении к серверу
  • Icloud ошибка 0x800701aa
  • Icloud обнаружил ошибку при попытке подключения к серверу
  • Icloud выдает ошибку при входе
  • Icloud во время аутентификации произошла ошибка повторите попытку