Hp 4025 ошибка 59 f0 - Решение и исправление самых разных ошибок на TopOshibok.ru

Create an account on the HP Community to personalize your profile and ask a question

Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.

Locked

‎04-24-2023

09:41 AM

HP Recommended

Mark as New
Bookmark
Subscribe
Permalink
Print
Flag Post

Product: HP Color LaserJet Enterprise CP4025dn Printer

Operating System: Microsoft Windows 10 (64-bit)

Receiving an error message on an HP CP4025 of 59.F0 after replacing all of tray 3. What is the fix for error 59.F0?

1 REPLY 1

‎04-24-2023

11:03 PM

HP Recommended

Mark as New
Bookmark
Subscribe
Permalink
Print
Flag Post

The most common cause of this error is a sticking solenoid in the fuser drive assembly. This video shows the tear down required https://www.youtube.com/watch?v=J4wHU4dFQ0g

If you find the information provided useful or solves your problems, help other users find the solution easier by giving kudos and marking my post as an accepted solution.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.

There is a lot of misinformation about this issue on the internet and in the HP repair manuals for each of these models. This will fix your machine every time guaranteed! It starts out as an intermittent issue that can be fixed by powering the machine off and then back on and over time develops …

Was this reply helpful?

Yes

Warning

Be alert for scammers posting fake support phone numbers and/or email addresses on the community.

If you think you have received a fake HP Support message, please report it to us by clicking on «Flag Post».

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.

English

Open Menu

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href=»https://www8.hp.com/us/en/terms-of-use.html» class=»udrlinesmall»>Terms of Use</a> and <a href=»/t5/custom/page/page-id/hp.rulespage» class=»udrlinesmall»> Rules of Participation</a>.

Источник

How to fix the 59.F0 Error

59.F0 Error Description:

This 59.F0 (that is F-zero, not F-oh) error is primarily caused by a transfer alienation failure in which the ITB is stuck and unable to rotate, the SR9 sensor (the primary transfer roller disengagement sensor) has gone bad or the fuser drive assembly has failed.

The 59.F0 error is a common error on the CP and CM, and M version HP Color LaserJet products. Printers such as the HP Color LaserJet CP3525, CP4025, CP4525, M651, M680 and CM4540 encounter the dreaded 59.F0 error often.

59.F0 Error Code

Even the newer LaserJets M477 and M452 encounter the 59.F0 error. However, in the case of these models, the cause is a timing issue which can be resolved by updating the DC Controller firmware (contact Metrofuser for further information regarding this fix). Either way, diagnosing the 59.F0 error issue could be time consuming and costly.

59.F0 error, the usual culprit is a failing Fuser Drive Assembly

For a 59.F0 error, the usual culprit is a failing Fuser Drive Assembly; this assembly drives the fuser and also turns a flag on your transfer belt assembly.

HP 59.F0 Error Found on The HP Color laserJet CP3525 CM3530 CP4525 & CM4540

Solution to the 59.F0 Error

When troubleshooting the 59.f0 error, we recommend starting with the transfer belt itself. Remove the belt from the printer. On the right-hand side there is a white round protrusion that engages the belt with the drive assembly. You can rotate this clockwise (2) to rotate the belt and if all goes well, unlock the sensor flag into position (1).

How To Replace The HP CP4025 CP4525 CM4540 CP3525 CM3530 Transfer Kit Belt
How to Clean and Maintain The HP Color LaserJet Transfer Belt ITB ETB Assemblies
CP3525 CM3530 and CP4025 Fuser Drive Duplex Simplex Conversion RM1-5001 RM1-4974 Service Note

If the flag fails to engage downwards or spin, then replace the belt. This is a common issue on the CP3525, CP4025, CP4525 and CM4540 series products.

If replacement of the transfer belt does not resolve the 59.F0 error, then it could either be the Fuser Drive Gear assembly or the solenoid located on the assembly. Gaining access to this assembly is time consuming and could take up to four hours. Due to the amount of assemblies required just to gain access to the Drive Assembly, plan on at least two hours to obtain access to the solenoid itself.

59.F0 error repair and the HP Color laserJet CP3525 CM3530 CP4525 & CM4540 motor

59.F0 error repair and the HP Color laserJet CP3525 CM3530 CP4525 & CM4540 59.F0 solenoid

Much like the solenoids that release to engage the Tray 2 pickup drive, the Fuser Drive Assembly solenoid may also be sticking due to the wear of the noise dampening sponge, which can expose the glue causing the timing of the Fuser Drive Gear to slip.

The picture above shows the Fuser Drive Assembly removed from the machine. The highlighted screws are required to be removed in order to access the solenoid.

The next picture shows the access point of the screws on the assembly still located inside the printer. These screws are accessible by removing the back cover, DC Controller, Low Voltage Power Supply and High Voltage Power Supply (both upper and lower).

The Main Drive Assembly (MDA) is not required to be removed to gain access to

the solenoid. After removal of the solenoid, denatured or 99% alcohol can be used to remove the glue from it. Remove the spring and armature from the solenoid. Thoroughly clean any residual adhesive left by the old solenoid pad. Be sure to also clean the underside of the armature before reassembling the solenoid.

Three or four layers of electrical tape can be applied in order to act as a replacement noise dampener. It is also recommended as to eliminate the magnetic charge that could build up when the solenoid arm strikes the base.

The solenoid is not always the issue. If the sponge is intact, and it does not stick, the Fuser Drive Assembly may very well be the issue. The part number for the Fuser Drive Assembly solenoid is RK2-0950.

If the transfer belt and Fuser Drive Assembly solenoid are good, the gears on Fuser Drive Assembly may be out of alignment. The three gears at the backside of the solenoid are keyed to keep them properly synchronized. Often, these gears will skip a tooth and then be out of sync, causing a 59.F0 error. Once the Fuser Drive Assembly is removed from the printer, you can easily remove two of these three gears and realign them so that the keyed gaps and teeth are in the right spots.

The Fuser Drive Assembly part numbers are as follows:

HP Color LaserJet CP3525 Simplex RM1-5001
HP Color LaserJet CM3530 CP3525 Duplex RM1-4974
HP Color LaserJet CM4540 Duplex RM1-5656
HP Color LaserJet CP4520 CP4525 Duplex RM1-5656
HP Color LaserJet CP4520 CP4525 Simplex RM1-6702

59.F0 Error Repair Difficulty Level

The 59.F0 level of repair is a 9 out of 10. Depending on the level of technical expertise, this procedure should take approximately four to five hours from start to finish if replacing the Fuser Drive Assembly.

For technical assistance or to schedule a training module please contact us at 908-245-2100.

Other Helpful Resources

Paper Jam Solutions For Laserjet Printers
Printer Service And Parts Glossary
Printer Service Error Codes
Developing a Critical HP Printer Parts Stocking Strategy

Metrofuser is a leading global innovator, manufacturer of printer parts, equipment, diagnostics, repair information and systems solutions for professional users performing critical tasks. Products and services include hp printer parts, printers and printer repair training. Parts include hp printer parts such as printer fusers, printer maintenance kits and other hp printer replacement parts.

The company’s, customers include office equipment dealerships, online retailers, repair centers and MPS service providers nationwide. Metrofuser has been named to Inc. Magazine’s fastest growing companies five consecutive years. Contact us at 908-245-2100, Dial 0 for sales.

Источник

hp-concentra-wrapper-portlet

Actions

${title}

Loading…

The primary-transfer-roller disengagement motor experienced an error.

Recommended action for customers

Turn the printer off, and then on.
If the error persists, contact customer support at www.hp.com/go/contactHP, or contact an HP-authorized service or support provider.

Источник

If you’re an HP printer user, chances are you’ve encountered the dreaded error code 59.F0 at some point. This error code usually indicates a faulty internal motor within your printer. Here, we will discuss the steps to troubleshoot and fix “HP Printer Error Code 59.F0”. This step helps the user to rectify the problem and get the printer running again. There can be various factors that may cause the issue like hardware issues, wear and tear problems, power surge failures, and many more. So, need to follow up with the resolving steps accordingly.

What is HP Printer Error Code 59.F0?

As with any other error code, there can be multiple causes for HP Printer Error Code 59.F0. In this case, it is generally caused by a faulty internal motor. This can happen due to several reasons, such as a power surge or simply wear and tear over time.

The first thing you should do is check all of the connections to your printer. Make sure that the power cord is plugged in securely and that there are no loose cables anywhere. Once you have verified that everything is properly connected, try restarting your printer. If the error persists, it is likely that the internal motor is indeed faulty and will need to be replaced.

Related: HP Printer Error Code 02

What are the Common Causes of HP Printer Error Code 59.F0?

Error code 59.F0 on HP printers generally indicates a problem with the printer’s internal motor. There are several potential causes for this error, including:

The printer’s main drive motor may be faulty or failing. This can be caused by a variety of factors, such as age, wear, and tear, or electrical issues.
The printer’s main drive belt may be loose, damaged, or misaligned. This can cause the motor to work harder than usual, eventually leading to failure.
The printer’s main PCB may be faulty. This is usually caused by a manufacturing defect or damage during shipping.
The printer’s firmware may be outdated or corrupt. This can happen if the printer has not been properly maintained or updated.
The printer may be receiving too much power. This can cause an overload and lead to an error code.

How to Troubleshoot and Fix HP Printer Error Code 59.F0?

To troubleshoot this error, first, check all of the connections to make sure they are secure. If everything looks good there, then next check the cable for any damage. If you find any damage, replace the cable. If the cable appears to be in good condition, then follow the steps below:

Spin the Motor

Open up the printer’s cover and locate the internal motor near the center of the machine.

Using a screwdriver, lightly tap on the motor until it starts spinning freely. Be careful not to damage any other parts of the printer while doing this!
Close up the printer’s cover and try printing again. The error should now be fixed.

Replace the Internal Motor

For HP Printer Error Code 59.F0, the problem is likely with the internal motor. Follow the steps below to replace the faulty motor:

Unplug the power cord from the printer.
Open the back panel to access the motor assembly.
Carefully remove the faulty motor and replace it with a new one of the same type.
Reattach the power cord and turn on the printer to test it out.
If these steps do not solve your issue, then move to the next step for a solution.

Reset the Printer

If you face HP Printer Error Code 59.F0, then follow these steps to reset the printer and fix it.

Turn off the printer and unplug it from the power outlet.
Wait for 30 seconds, then plug the printer back in and turn it on.
Try printing something to see if the error is fixed.

Update your Printer Firmware

It is possible that your printer’s firmware is outdated and needs to be updated to work properly. So, follow these steps to update the firmware:

Firstly, download the latest printer firmware and software from the HP website.
Connect your printer to your computer with a USB cable or by using Wi-Fi.
Install the software and follow the instructions for updating the firmware.
After that, restart your printer to ensure that it is functioning properly.
You should also check for any other updated drivers or software related to your printer from time to time as they can help keep it running smoothly.

Run a Printer Maintenance Utility

If your printer is displaying HP Printer Error Code 59.F0, then run a printer maintenance utility.

Firstly, open the control panel of your printer.
Select the “Maintenance” option.
After that, select “Printer Maintenance Utility”.
Follow the prompts to run the utility. This process will typically take a few minutes to complete.
Finally, restart the printer and check to see if the error code persists or not.

Related: HP Printer Error 60.02

FAQs

How do I Fix Error 59 F0 on HP Printer?

If you configure HP Printer Error Code 59.F0, follow these steps to troubleshoot and fix the problem:

Check for any paper jams in the printer. If there are any, clear them away and try again.
If there are no paper jams, try resetting the printer. To do this, simply unplug it from the power outlet for 30 seconds and then plug it back in again.
If the printer still isn’t working properly, contact HP customer support for further assistance.

What is 59 F0 Error in HP Color Laserjet CP4025?

The “59.F0” error code on your HP Color Laserjet CP4025 printer indicates a problem with the internal motor. This is a serious error that will require professional service to fix. Do not attempt to repair this yourself as you could cause further damage to the printer.

What is Error 59 F0 on HP Laserjet m477fdw?

When you encounter HP Printer Error Code 59.F0 on your HP Laserjet m477fdw printer, it means that the internal motor is responsible for moving the paper through the printer, and if it has failed, the printer will not be able to print.

How do I fix Error Code F0?

There are a few things that you can try to fix the issue, such as:

Turn off the printer and unplug it from the power outlet. Wait a few minutes and then plug it back in and turn it on. This may reset the printer and clear the error.
Check to make sure that nothing is blocking the path of the paper through the printer. If there is, remove it and try printing again.

If you have recently installed any new software or hardware on your computer, try uninstalling it and then restarting your computer. This may solve the problem if it was caused by incompatible software.

More Helpful Guides

HP Printer Error Code 3F0
What to Do When HP Printer is Not Connecting to Printer?
HP Deskjet 2331 Setup

Источник

59.FO error is a Transfer Alienation Failure. If you have warranty on this printer then call it into HP for servicing. If not then contact a local PCRepair shop and ask for a quote.

Here is the error information from the Service Manual.

59.XX Error, Turn off then on
The product has experienced an error with one of the internal motors.
● 59.30 = Fuser motor startup error
● 59.40 = Fuser motor rotation error
● 59.70 = Black developer motor startup error
● 59.71 = Cyan developer motor startup error
● 59.72 = Magenta developer motor startup error
● 59.73 = Yellow developer motor startup error
● 59.80 = Black developer motor rotation error
● 59.81 = Cyan developer motor rotation error
● 59.82 = Magenta developer motor rotation error
● 59.83 = Yellow developer motor rotation error
● 59.90 = ITB motor start error
● 59.A0 = ITB motor rotation error
● 59.C0 = Developer motor rotation error
● 59.F0 = Transfer alienation failure

Recommended action
1. Reset the printer:
a. Turn off the power by using the power switch, and then wait at least 30 seconds.
b. Turn on the power and wait for the product to initialize.
2. If you are using a surge protector:
a. Power off the printer.
b. Remove the surge protector.
c. Plug the product directly into the wall socket and turn the product power on.
3. If the error persists, replace the appropriate motor:
Error Code Motor Description HP Part #
59.30, 59.40 Fuser Motor Assembly RM2–7348–000CN
59.70, 59.71, 59.72, 59.73, 59.80, 59.80, 59.82, 59.83 59.C0 Developing Motor Assembly RM2–7344–000CN
59.90, 59.A0, 59.FO Drum Motor Assembly RM2–7342–000CN

Experts are not HP Employees. Experts are advanced users, administrators, technicians, engineers or business partners who volunteer their time to answer community questions.

Please mark anything that is helpful with a Kudo.
When you are done troubleshooting, please mark one of the responses as the Solution.
This feedback enhances the community by helping future readers choose between multiple similar responses.

59.FO error is a Transfer Alienation Failure. If you have warranty on this printer then call it into HP for servicing. If not then contact a local PCRepair shop and ask for a quote.

Here is the error information from the Service Manual.

Experts are not HP Employees. Experts are advanced users, administrators, technicians, engineers or business partners who volunteer their time to answer community questions.

Принтер или МФУ HP CLJ Pro M377 / M452 / M477 и другие модели выдают ошибку 59.F0 или 59.C0 выкл. и вкл. Устройство. Давайте разберемся в проблеме. Данная ошибка возникает после определенного пробега устройства. Ошибки в датчиках или по другому в концевиках. Ошибка 59.F0 означает что неисправна лента переноса, но если лента не прошла свой ресурс заявленным производителем, то какой смысл ее менять, да и к тому же это не дешевое удовольствие.

Разберем в чем неисправность ошибки, в ленте переноса изображения есть микрик, в котором со временем окисляется контакт и мозги устройства сигнализируют ошибку, не дающую дальнейшей работы на оборудовании.

Что можно сделать в данной ситуации, самое простое заменить ленту, второе очистка микрика от окислов. Чтобы до него добраться сначала надо разобрать принтер и извлечь ленту переноса. Далее становится труднее, так как повредив перенос изображения, вы автоматически попадаете на замену ее. Сам датчик не разбирается легко, концевик можно извлечь с помощью иголок не повредив его крепление. Контакты нужно очистить и привезти в порядок. Мультиметр должен показывать сопротивление не больше одного ома. Чтоб сэкономить время и деньги вы всегда можете обратиться к нам по ремонту принтеров.

Замена ленты переноса или профилактика аппарата

При разборке узла переноса нужно быть очень внимательным, так как повредив узел уже нельзя будет добиться идеальной печати документов. По работе мастер извлекает ленту переноса, разбирает ее полностью, проводит профилактику, затем добирается до виновника ошибки. Так как к нам очень много заходит аппаратов с этими ошибками, у нас есть инструмент который легко извлекает ножку микрика из датчика.

Провести ремонт в нашем сервисе довольно просто, создав заявку или обратившись по другим контактам. Занимает по времени от одного до двух дней в зависимости от загруженности инженеров. Насколько долго это прослужит, прослужит до конца ресурса ленты переноса.

How to fix the 59.F0 Error

59.F0 Error Description:

59.F0 Error Code

59.F0 error, the usual culprit is a failing Fuser Drive Assembly

For a 59.F0 error, the usual culprit is a failing Fuser Drive Assembly; this assembly drives the fuser and also turns a flag on your transfer belt assembly.

HP 59.F0 Error Found on The HP Color laserJet CP3525 CM3530 CP4525 & CM4540

Solution to the 59.F0 Error

How To Replace The HP CP4025 CP4525 CM4540 CP3525 CM3530 Transfer Kit Belt
How to Clean and Maintain The HP Color LaserJet Transfer Belt ITB ETB Assemblies
CP3525 CM3530 and CP4025 Fuser Drive Duplex Simplex Conversion RM1-5001 RM1-4974 Service Note

If the flag fails to engage downwards or spin, then replace the belt. This is a common issue on the CP3525, CP4025, CP4525 and CM4540 series products.

59.F0 error repair and the HP Color laserJet CP3525 CM3530 CP4525 & CM4540 motor

59.F0 error repair and the HP Color laserJet CP3525 CM3530 CP4525 & CM4540 59.F0 solenoid

The picture above shows the Fuser Drive Assembly removed from the machine. The highlighted screws are required to be removed in order to access the solenoid.

The Main Drive Assembly (MDA) is not required to be removed to gain access to

The Fuser Drive Assembly part numbers are as follows:

HP Color LaserJet CP3525 Simplex RM1-5001
HP Color LaserJet CM3530 CP3525 Duplex RM1-4974
HP Color LaserJet CM4540 Duplex RM1-5656
HP Color LaserJet CP4520 CP4525 Duplex RM1-5656
HP Color LaserJet CP4520 CP4525 Simplex RM1-6702

59.F0 Error Repair Difficulty Level

For technical assistance or to schedule a training module please contact us at 908-245-2100.

Other Helpful Resources

Paper Jam Solutions For Laserjet Printers
Printer Service And Parts Glossary
Printer Service Error Codes
Developing a Critical HP Printer Parts Stocking Strategy

HP laser colour jet printer is showing 59 F0 Error, and not printing papers properly? Are you too facing the same issue? So the solution to this scenario is provided in a detailed manner and step to step solution to the HP 59 F0 Error.

There are many errors faced by the HP printer like 59.30- motor startup error, 59.40-motor rotation error, 59.90- ITB motor error, 59.F0, etc.

Methods to Solve Error 59.F0 on HP m452nw

The answer to this will be, it is a primarily caused by transfer alienation failure in which ITB is stuck and unable to rotate and the roller disarrangement sensor has gone bad or failed. Usually, for 59.F0, it is recommended to try resetting the toner and the fuser assembly. It is basically the solution to improve HP M452Nw 59 F0 Error:

Solution 1:

Reset the printer using the power switch, turn off the printer for a few minutes.
Turn on the printer and wait for the HP colour jet printer to revitalise.
If there’s any surge protector remove it.
If the problem continues then replaces the motor.

Solution 2:

Verify the ITB installed adequately or not.
Reconnect the primary transfer disengagement sensor.
Run the sensor test in the sensor monitor mode to verify that the primary transfer disengagement is functioning correctly, if not replace it.
Perform the alienation drive.

Examine the fuser motor, if not working properly, replace it

Solution 3:

Reset the printer; turn off the power by using power switch and wait for some time.
Remove the surge protector (if the user is using).
If the problem is still there, then the PCA Assembly needs to be replaced.
If still it’s troubling after replacing the PCA Assembly, then you might have to replace the product.

Steps To Perform ITB Alienation Test:

Remove the transfer belt assembly.

Open the toner access door and remove the cyan cartridge.
Insert a flat blade screwdriver in the slot; let it stay there until the test is performed. The inserted screwdriver stimulates the toner access.

Once done take it out, assemble it and switch it on.
During the test, the gear needs to spin if it doesn’t spin or it tends to miss the spin then the fuser assembly is damaged. The only solution will be to repair it or replace it.

Steps to Solve 59.F0 Error on HP Printer:

Check the ITB alienation sensor by doing manual sensor test in the troubleshooting menu.

Reconnect the connectors of ITB.
Perform ITB alienation test in the troubleshooting menu.
Reconnect the connectors of primary roller disengagement motor. If it works then its recovered if not then it must be replaced.

Hence this will hopefully solve the issue of 59.F0 Error M452Nw.

Thus, these are the few ways to check on the issues faced by the HP colour jet printer m452nw. Hopefully, these will fetch a solution to the users facing such issues.

venmartin Changed status to publish July 16, 2020

Источник