Friamat prime eco ошибка 34

• Contents

• Table of Contents

• Bookmarks

Summary of Contents for FRIATEC FRIAMAT PRIME ECO

EN

8

Irregularities during fusion cause error messages or warnings to appear on the

display of the FRIAMAT fusion unit.

INFORMATION

On the FRIAMAT Basic, press the Menu key to view the displayed error

message in plain text!

INFORMATION

Should the FRIAMAT fusion unit output an error message or warning that is

not listed in the following and that cannot be explained or remedied despite

the plaintext description, contact our service hotline +49 (0)621 486-1533!

Error messages

No.

Displayed text

02

Temperature

out of range

03

Resistance outside

of tolerance

04

Fitting’s wire turn

short circuited

05

Fitting’s wire turn

interrupted

06

Voltage outside

of tolerance

48

Meaning/causes

Ambient temperature outside

of permitted range

Fitting’s electrical resistance

outside of tolerance.

Short circuit in the fitting’s

wire turn.

Current flow interrupted

Deviation in fusion voltage

too high.

Remedy

You may have to tent

over or shield the

fusion area.

Check that contacts sit

firmly and are clean. If

necessary, clean con-

tacts and replace the

fitting.

Replace fitting, and

send it in for analysis.

Check the connection

between the fusion

plug and the fitting. If

OK, replace fitting, and

send it in for analysis.

Notify authorised

service station.

• 
• © 2014 — 2023 «Game 🏃 Runs» — прохождения видеоигр

• Отказ от ответственности
• Правообладателям
• Постеры игр: © MobyGames.com
• Полезное

• 38 W arning messages/Info: Text in Display Instruction/Remedy Attention: Second If a fitting is to be fused fusion process twice, the contact plugs on the fusion unit of the fitting must be pulled out after the first fusion, and the fitting must be allowed to cool down (see processing instructions by fitting manufacturers). Please read in Only with prime eco: fusion code first this appears when the traceability barcode of a fitting was accidentally read in first. Please read in Only wit

• 34 6. Warranty/Maintenance/ Taking out of service 6.1 Warranty The warranty period for FRIAMAT ® fusion units is 24 months. 6.2 Service and maintenance According to DVS 2208 part 1 and BGV A2 (VBG 4) “Electrical Plants and Devices” a maintenance of moveable electrical devices should be carried out once a year (see list of authorised service stations in section 8.2). Please include all connecting adapters for service checks. WHAT? WHEN

• 10 Input voltage range Frequency range Current consumption Output Safety fuse Casing Connection cable Fusion cable Weight Barcode type Operating temperature range** Fusion current monitoring Printer interface Service interface Maxi-Display Connection Plug 4.0 mm Hand scraper/replacement blades Manual emergency programming Remote operating pass Operator pass Supervisor pass FRIATRACE (from version 5.1) FRIATEC Memory-Stick FRIATEC Memory-Box Documentation of fusion and traceability data Data storage in unit Data storage b

• 13 — Thoroughly remove any existing deposits. — Protect plug from contamination, replace if necessary. — Check fusion plug and contact sockets of the fitting for dirt before connecting. 3. Basic “Fusion” Procedure 3.1 Preparation The appropriate assembly instructions need to be observed for the correct processing of FRIALEN ® safety fittings and FRIAFIT ® sewage system. The same applies for fittings by other manufacturers. IMPOR TANT! Roll out cables completely! T

• 5.4.4 Comment 1 25 5.4.5 Comment 2 25 5.4.6 Subcontractor 25 5.4.7 Traceability 25 5.4.8 Pipe number 25 5.4.9 Pipe length 25 5.4.10 GPS data 26 5.4.11 Seam number 26 5.4.12 Scraper tool 26 5.5 Menu „Data“ 26 5.5.1 Transfer 26 5.5.2 Delete 27 5.6 Menu “Info” 28 5.7 Menu “Emergency input” 28 5.8 Menu “Formatting” 29 5.9 Fusion Options 29 5.9.1 ID Data 29 5.9.1.1 Commission number 30 5.9.1.2 Operator pass 30 5.9.1.3 Continuous number and Seam number 31 5.9.1.4 GPS 1 — 3 31 5.9.2 Traceability barcodes/ Pipe number/Pipe l

• 4 1. Safety 1.1 Dangers FRIAMAT ® fusion units have been designed using state of the art technology and are designed accor- ding to recognised safety regulations and fitted with appropriate protective equipment. In addition FRIAMAT ® fusion units have been submitted to extensive tests in line with the German law for equipment safety. Functionality and safety of FRIAMAT ® fusion units are tested before they are supplied to the customer. However, incorrect use or abuse of the equipment will lead to dangers with regard to: — the health of the user, — your FR

• 18 IMPOR TANT! The language setting menu displays two aste- risks right and left in the top line. These serve to identify the language setting menu if the langua- ge has been accidentally changed. 4.4 Menu “Info” Pressing the MENU button will take you to the main menu. Use the arrow buttons to take you to the sub- menu “Info” and select this by pressing the START button. The submenu “Info” is divided into the fol- lowing individual menus: • date/time • voltage/frequency • temperature (ambient temperature) • de

• 1. Safety 4 1.1 Dangers 4 1.2 Safety hints and tips 4 1.3 Designated equipment use 5 1.4 Sources of danger 6 1.5 Authorised users 6 1.6 Dangers from electric power 6 1.7 Emissions 8 1.8 Safety precautions on site 8 1.9 Signal equipment 8 1.10 Emergencies 8 2. Basic Data 8 2.1 Design/parts 8 2.2 Operating principle 9 2.3 Technical data 10 2.4 Transport/storage/dispatch 12 2.5 Setting up/connecting 12 2

• 33 5.9.3 Info text, Comment 1, Comment 2, Subcontractor Depending on your selections, the following will appear as part of the data programming prior to fusion „INFO TEXT“, „COMMENT 1“, COMMENT 2“ and/or „SUBCONTRACTOR“. By pressing the MENU button and using the arrow buttons (symbol selection) you will be able to add any additional text. The lines will be blank initially , i.e. no additional text is displayed (e.g. the text last entered). Use the START button to save your entry and press

• 24 5.4.2 Operator pass IMPOR TANT! The menu “Operator pass” is activated (and thus visible to you) only once an operator pass has been read in – with the documentation switched on. You can order operator passes from FRIATEC. Once an operator pass has been read in, all fusion processes carried out will be saved under the code of this operator pass. By reading in a different operator pass your FRIAMAT ® — model will be switched over accordingly. IMPOR TANT! Once you have read in the operator pass you will automatically be taken to submenu „ID Data“ (se

• 43 FT_2377e_II_07_GB.qxd 13.02.2007 12:31 Uhr Seite 43
  

• 11 AC 190…250 V AC 190…250 V 45…66Hz 45…66Hz AC 16 A max. AC 16 A max. AC 3,6 kVA AC 3,6 kVA 20 slow acting (inside) 20 slow acting (inside) Type IP 54 Type IP 54 protection grade II protection grade II 5m including Euro plug 5m including Euro plug 4 m 4 m 19 kg 19 kg Code 2/5 (interleaved) Code 2/5 (interleaved) Code 128 -20 °C … +50 °C -20 °C … +50 °C Short Circuit and Short Circuit and Cut-Off Cut-Off USB no serial serial no no yes yes optio

• 27 IMPOR TANT! The device receiving the data (PC/Laptop/ FRIATEC Memory-Stick, printer) must be con- nected before you access submenu „Transfer“. IMPOR TANT! FRIATEC does not accept any liability for the use of standard USB memory-sticks. Please use the FRIATEC Memory-Stick. If the data transfer has been prepared correctly, you will be able, after pressing the START button, to select either „ALL“ or „SELECTION“ in the submenu „Transfer“. If you select „ALL“ usin

• 32 T-CODE“). If you have activated the programming of pipe number and/or pipe length these will then also be displayed and can be entered accordingly (select symbols by pressing the MENU button and using the arrow buttons and save data by pressing the START button). You will then be asked to enter the traceability barcode of Component 2. Programming of pipe number and/or pipe length takes place as described above. If you have not activated any addi- tional text (see