Enter recovery mode 3utools ошибка - Решение и исправление самых разных ошибок на TopOshibok.ru

Natalie Ellis:
What’s the hold-up?:

Warm air from the lower veil, mixing up with air from the veil mounted from above will create an obstacle for cold external air. Speed regulator: Output РЅР°РїСЂСЏР¶РµРЅРёРµР’. Limit switch: Includes / switches off the veil engine on opening closing of gate. Range of operating temperatures:. S. Rabochey РЅР°РїСЂСЏР¶РµРЅРёРµР’, In, Century. Triple-pole contactor: Monitor and protection of electric motors. Tension РїРёС‚Р°РЅРёСЏР’, V. Nominalnaya РјРѕС‰РЅРѕСЃС‚СЊРєР’С‚. At installation of a veil in horizontal and vertical position it is necessary to observe the minimum admissible distances; Connection of a veil to an electrical network has to be made by professionally prepared person; The Veil has to be established as it is possible closer to a doorway; It is recommended that width of a veil (horizontal position) or height of a veil (vertical position) was wider, than I will eat; For more effective cutting off of external air, and also with a high frequency of opening of doors, it is recommended to establish veils from two parties of an aperture; In case of use of «An active combination» that means combinations of veils of cold and hot air, the veil with the built-in heat exchanger is established in the lower part of a system; Separate modules fasten by means of the connecting tapes which are a part of delivery; It is recommended to use a calibrated wrench at their installation.

Horace Tran:
What is going on?:

Also at design of systems of cold supply in the scheme separate pipelines for carrying out auxiliary operations are provided in devices of technological shops and also for release of technological devices in shops from liquid coolant. [url=http://РґРѕРј-РіРµР»РµРЅРґР¶РёРє.СЂС„/2019/04/10/%d0%ba%d0%be%d0%b3%d0%b4%d0%b0-%d0%bd%d1%83%d0%b6%d0%bd%d0%b0-%d1%81%d0%b8%d1%81%d1%82%d0%b5%d0%bc%d0%b0-%d1%85%d0%be%d0%bb%d0%be%d0%b4%d0%be%d1%81%d0%bd%d0%b0%d0%b1%d0%b6%d0%b5%d0%bd%d0%b8%d1%8f/]When the system of cold supply is necessary?[/url]Happens a situation when at the refrigerating station the compressor unit is not provided; then on the separate pipeline from a warehouse on the station liquid coolant moves, and on another couples under pressure for its displacement and giving upon the station move.

Hailey Stuart:
What is your point?:

However in calculations existence of the modern and powerful heat-generating equipment is not considered. In this regard, this method yields the underestimated results and is not applied as the basic, and serves for determination of approximate sizes. On the basis of absorption speed Basis of this method is the assumption that for ensuring optimum removal of the polluted air it is necessary to set some speed of absorption of a concrete ventilating umbrella over a concrete working surface (with the known sizes and distance between them). When calculating the specifics of the heat-generating equipment, without binding to the room sizes are considered, and are suitable only for traditional ventilating umbrellas (calculations for forced-air and exhaust induction umbrellas and the filtering ceilings will give a considerable error). Because of limitation of application the method is also not the basic, and serves for checking of results of other methods. On the basis of the power of the equipment Is the main method accepted by us for air exchange calculation since considers specific amounts of the hidden and obvious warmth which is marked out by the equipment РЅР°РєР’С‚ to power consumption and irrespective of the sizes of the room or geometry of a working surface yields qualitative results.

Источник

An iPhone stuck on the Restore screen is a very annoying situation that limits the use of the device. Unless it is a very rare case or an internal hardware problem, this behavior is caused by a failed iOS system update, and the most viable solution is to connect the phone to the computer and iTunes will take care of restoring it. , although it is also possible to use the 3uTools tool.

Indeed, 3uTools is a tool that allows you to manage the content of the iPhone but also fulfills the function of updating and restoring the device’s firmware, being able to download the appropriate official iOS versions depending on the iPhone model. In turn, it has a function to exit recovery mode that can prevent a general reset of the terminal, with the consequent loss of personal information in case the iPhone has a backup copy.

How to download 3uTools to your PC

Enter the official page of the software http://www.3u.com/ and click the Download button. You should note that for 3Tools to work properly you need iTunes installed on your computer. On Windows, the best way to download the latest version of iTunes is provided by the Microsoft Store, accessible from the taskbar.

Get out of iPhone recovery mode using 3uTools

Open 3uTools and connect the problem iPhone to the computer with a genuine or Apple-certified USB cable.

Check on the program screen that 3uTools has detected the iPhone in recovery mode and click Exit Recovery Mode.

If successful, close the program and use your iPhone as normal. Otherwise, perform the next step.

Reconnect the iPhone stuck in Recovery mode to the computer. Once it is detected by 3uTools click on the Go Flash option which will allow you to restore iPhone firmware.

As the next step, go to the right side of the screen and select the latest iOS version that is compatible with your iPhone. Then click Download.

Once the download is complete, select the Quick Flash Mode option and click Flash.

Once this is done, the iPhone factory restore process will begin. Once finished, you will have to configure your phone from scratch and, if necessary, restore a backup made previously.

What to do if 3uTools fails to fix iPhone stuck?

If the above steps don’t resolve the stuck iPhone, try resetting the iPhone but in DFU mode, an advanced troubleshooting mode.

For this, go back to the 3uTools screen and click on the Smart Flash option. Then go to the right side and click on Pro Flash. Connect your iPhone to the computer and follow the instructions on the screen to put the terminal in DFU mode.

Once done, click on the Flash option. Wait for the process to finish.

If the program is unsuccessful or hangs in any of its phases, it is most likely that the iPhone has a hardware problem that requires a review by specialized personnel.

Источник

[Fix] iPhone Stuck At Recovery Mode?

You may meet such a problem that iPhone stuck at recovery mode after you failed to upgrade iPhone.You may try to restart your iPhone again, but this problem persists. So this tutorial aims to show you how to get your iPhone out of recovery mode.

Why iPhone stuck at recovery mode?

iPhone may stuck at recovery mode when you reset your iPhone/iPad. In addition, when you upgrade/downgrade your iPhone, if some unknown errors happen during the upgrade/downgrade process, iDevice will easily stuck at recovery mode.

Use 3uTools to restore iPhone out of recovery mode
Please download and install the latest 3uTools on your PC. Connect your iPhone to PC using the USB cable. Click “Flash Jailbreak”→”Easy flash”. Choose the firmware you want, and then click “Flash ”. Wait till this process is completed. When it’s done your iDevice will be fixed.

Use iTunes to get your iDevide out of recovery mode

* For iPhone 6s and older iDevices..

1. Unplug USB cable from your computer.

2. Press the Power button and Home button on your iPhone simultaneously till iDevice is turned on.

3. Continue to press iPhone’s power button to restart your iPhone.

4. Connect iDevice to iTunes using the USB cable and restore it.

* For iPhone 7, iPhone 7 Plus.

1. Press the Power button and volume down button on your iPhone simultaneously.

2. Release the two button when iPhone shows you the Apple logo.

3. If iPhone is not turn on, you need yo press Power button to turn it on.

4. Connect iDevice to iTunes using the USB cable and restore it.

It is worth mentioning that iDevice’s data can’t be saved via the two method above unless you’ve backuped your important data before.

Источник

I have the problem that as soon more then one phone is connected the machine idevicerestore fails with an error :»ERROR: Failed to place device in recovery mode» and keeps the phone stuck.

Plattform: windows
Source: it’s reproduceable with the current pushed source code
Build: with msys64
Systems: tested on different windows10 machines, different iTunes versions, different phones, different cables — no change noticable
Call: idevicerestore -C -l -e -y -d

Behaviour:
As long only one phone is connected the whole process runs without any problem through.
As soon a second phone is conneced the call fails with the error and phone is stuck.

Do you have any idea what could trigger that problem?
I saw there was a change in that code area on 11 Oct 2019 commit
[https://github.com/libimobiledevice/idevicerestore/commit/767fcceaeb456f5e281a6bd1b3f51713e4989293] — but no clue if that could be related to that behaviour.

`
idevice_event_cb: device 0000000000000000 (udid: 1bfd3526abc6a6ccb46b57e4413e754d2a35406a) connected in normal mode
idevice_event_cb: device 0000000000000000 (udid: 1bfd3526abc6a6ccb46b57e4413e754d2a35406a) connected in normal mode

Trying 104.24.27.50:443…
TCP_NODELAY set
Connected to api.ipsw.me (104.24.27.50) port 443 (#0)
ALPN, offering h2
ALPN, offering http/1.1
error setting certificate verify locations, continuing anyway:
CAfile: D:/git/securaze/mobile/desktop/build-mobiletest-Desktop_Qt_5_13_0_MSVC2017_64bit-Debug/ssl/certs/ca-bundle.crt
CApath: none
SSL connection using TLSv1.3 / TLS_AES_256_GCM_SHA384
ALPN, server accepted to use h2
Server certificate:
subject: CN=ssl373768.cloudflaressl.com
start date: Jan 6 00:00:00 2020 GMT
expire date: Jul 14 23:59:59 2020 GMT
subjectAltName: host «api.ipsw.me» matched cert’s «*.ipsw.me»
issuer: C=GB; ST=Greater Manchester; L=Salford; O=COMODO CA Limited; CN=COMODO ECC Domain Validation Secure Server CA 2
SSL certificate verify result: unable to get local issuer certificate (20), continuing anyway.
Using HTTP2, server supports multi-use
Connection state changed (HTTP/2 confirmed)
Copying HTTP/2 data in stream buffer to connection buffer after upgrade: len=0
Using Stream ID: 1 (easy handle 0x281e150)

GET /v3/device/iPhone7,2 HTTP/2
Host: api.ipsw.me
User-Agent: InetURL/1.0 idevicerestore/1.0
Accept: /

old SSL session ID is stale, removing
Connection state changed (MAX_CONCURRENT_STREAMS == 256)!
< HTTP/2 200
< date: Wed, 12 Feb 2020 15:55:05 GMT
< content-type: application/json
< set-cookie: __cfduid=d7548ca8b6368e5b4f3df90800379619d1581522905; expires=Fri, 13-Mar-20 15:55:05 GMT; path=/; domain=.ipsw.me; HttpOnly; SameSite=Lax; Secure
< vary: Accept-Encoding
< access-control-allow-origin: *
< access-control-expose-headers: X-Data-Location, X-Server-Location
< cache-control: public
< content-md5: L8Z9OCHZdwC+4WZ9zWb4Xw==
< content-security-policy: default-src https: ‘unsafe-eval’ ‘unsafe-inline’; object-src ‘none’
< expires: Wed, 12 Feb 2020 16:10:02 GMT
< vary: Origin
< x-content-type-options: nosniff
< x-data-location: cache
< x-frame-options: DENY
< x-server-location: b62748e18422
< x-xss-protection: 1; mode=block
< strict-transport-security: max-age=15552000; preload
< x-frame-options: DENY
< cf-cache-status: HIT
< age: 1394
< expect-ct: max-age=604800, report-uri=»https://report-uri.cloudflare.com/cdn-cgi/beacon/expect-ct»
< server: cloudflare
< cf-ray: 563fbeae4ed9fca9-VIE
<
Connection #0 to host api.ipsw.me left intact
Getting device’s ECID for TSS request
NOTE: Unable to find BbCalibrationManifestKeyHash node
NOTE: Unable to find BbFactoryActivationManifestKeyHash node
NOTE: Unable to find BbSkeyId node
DEBUG: Applying restore request rules for entry AppleLogo
DEBUG: Adding EPRO=true to TSS entry
DEBUG: Adding ESEC=true to TSS entry
DEBUG: Applying restore request rules for entry BatteryCharging0
DEBUG: Adding EPRO=true to TSS entry
DEBUG: Adding ESEC=true to TSS entry
DEBUG: Applying restore request rules for entry BatteryCharging1
DEBUG: Adding EPRO=true to TSS entry
DEBUG: Adding ESEC=true to TSS entry
DEBUG: Applying restore request rules for entry BatteryFull
DEBUG: Adding EPRO=true to TSS entry
DEBUG: Adding ESEC=true to TSS entry
DEBUG: Applying restore request rules for entry BatteryLow0
DEBUG: Adding EPRO=true to TSS entry
DEBUG: Adding ESEC=true to TSS entry
DEBUG: Applying restore request rules for entry BatteryLow1
DEBUG: Adding EPRO=true to TSS entry
DEBUG: Adding ESEC=true to TSS entry
DEBUG: Applying restore request rules for entry BatteryPlugin
DEBUG: Adding EPRO=true to TSS entry
DEBUG: Adding ESEC=true to TSS entry
DEBUG: Applying restore request rules for entry DeviceTree
DEBUG: Adding EPRO=true to TSS entry
DEBUG: Adding ESEC=true to TSS entry
DEBUG: Applying restore request rules for entry KernelCache
DEBUG: Adding EPRO=true to TSS entry
DEBUG: Adding ESEC=true to TSS entry
DEBUG: Applying restore request rules for entry LLB
DEBUG: Adding EPRO=true to TSS entry
DEBUG: Adding ESEC=true to TSS entry
DEBUG: Applying restore request rules for entry OS
DEBUG: Adding EPRO=true to TSS entry
DEBUG: Adding ESEC=true to TSS entry
DEBUG: Applying restore request rules for entry RecoveryMode
DEBUG: Adding EPRO=true to TSS entry
DEBUG: Adding ESEC=true to TSS entry
DEBUG: Applying restore request rules for entry RestoreDeviceTree
DEBUG: Adding EPRO=true to TSS entry
DEBUG: Adding ESEC=true to TSS entry
DEBUG: Applying restore request rules for entry RestoreKernelCache
DEBUG: Adding EPRO=true to TSS entry
DEBUG: Adding ESEC=true to TSS entry
DEBUG: Applying restore request rules for entry RestoreLogo
DEBUG: Adding EPRO=true to TSS entry
DEBUG: Adding ESEC=true to TSS entry
DEBUG: Applying restore request rules for entry RestoreRamDisk
DEBUG: Adding EPRO=true to TSS entry
DEBUG: Adding ESEC=true to TSS entry
DEBUG: Applying restore request rules for entry RestoreSEP
DEBUG: Adding ESEC=true to TSS entry
DEBUG: Adding EPRO=true to TSS entry
DEBUG: Applying restore request rules for entry RestoreTrustCache
DEBUG: Adding EPRO=true to TSS entry
DEBUG: Adding ESEC=true to TSS entry
DEBUG: Applying restore request rules for entry SEP
DEBUG: Adding ESEC=true to TSS entry
DEBUG: Adding EPRO=true to TSS entry
DEBUG: Applying restore request rules for entry StaticTrustCache
DEBUG: Adding EPRO=true to TSS entry
DEBUG: Adding ESEC=true to TSS entry
DEBUG: Applying restore request rules for entry ftap
DEBUG: Adding EPRO=true to TSS entry
DEBUG: Adding ESEC=true to TSS entry
DEBUG: No Digest data, using empty value for entry ftap
DEBUG: Applying restore request rules for entry ftsp
DEBUG: Adding ESEC=true to TSS entry
DEBUG: Adding EPRO=true to TSS entry
DEBUG: No Digest data, using empty value for entry ftsp
DEBUG: Applying restore request rules for entry iBEC
DEBUG: Adding EPRO=true to TSS entry
DEBUG: Adding ESEC=true to TSS entry
DEBUG: Applying restore request rules for entry iBSS
DEBUG: Adding EPRO=true to TSS entry
DEBUG: Adding ESEC=true to TSS entry
DEBUG: Applying restore request rules for entry iBoot
DEBUG: Adding EPRO=true to TSS entry
DEBUG: Adding ESEC=true to TSS entry
DEBUG: Applying restore request rules for entry rfta
DEBUG: Adding EPRO=true to TSS entry
DEBUG: Adding ESEC=true to TSS entry
DEBUG: No Digest data, using empty value for entry rfta
DEBUG: Applying restore request rules for entry rfts
DEBUG: Adding ESEC=true to TSS entry
DEBUG: Adding EPRO=true to TSS entry
DEBUG: No Digest data, using empty value for entry rfts
DEBUG: Waiting for device to disconnect…
ERROR: Failed to place device in recovery mode
ERROR: Unable to place device into recovery mode from normal mode
`

Источник

How to Fix Error -1 amp; Error 1 in iTunes/3uTools? — 3uTools.

Re-launch 3uTools and restore again. 2. Lack of file. Cause:This reminder will exists if you rename the backup file. Solution: Rename the backup file to the name of DeviceID lowercase. How to check DeviceID: Launch 3uTools, go to iDevice, and click View iDevice Details Open in Notepad. Find out UniqueDeviceID as the. Unable To Restore Device -2 3utools. As a result of iPhone coming high price tag in Apple Store, some people choose to purchase second-hand iOS device. But theres always the risk that seller stole or assembled the phone and its now looking to flip it. Thankfully, verification report from 3uTools can tell you whether your device is.

3utools Error Unable To Restore Idevice 1 — generoustex.

Retain Users Data. Step 1: Open 3uTools, connect the iDevice to the computer with a USB cable; Go to Flash amp; JB Easy Flash, select Retain Users Data below, click Flash , and then the flash reminder will pop up. After reading it carefully, click Flash . Step 2: W aiting for the flash to complete.

3uTools — All error codes | Facebook.

After we tested and researched, our developer team find out that this issue may be caused by Apple server. As a result, users can not restore their iDevices using iTunes or earlier versions of 3uTools. 3u Team try our best to solve this issue as soon as possible. And finally, we released a new version of 3uTools, V2.16 to fix this. Mar 13, 2019 3. Error: Unable to read Nonce. 4. Error: Unable to enter Recovery Mode from Normal Mode. 5. Error: Unable to enter Recovery Mode from DFU Mode. 6. Error: Unable to detect the iDevice type. 7. Error: Unable to load IBEC. 8. Error: Unable to load RAMDISK. 9. Error: Unable to enter Recovery Mode. 10. Error: Unable to restore iDevice-1 More.

3utools Unable To Restore Device 1 — blclever.

Step 1 Connect your iDevice to 3uTools and go to Flash amp; JB Advanced, and click Download 64-bit iDevice. Step 2 Read the popup carefully and click Select IPSW Select SHSH, and double check the generator nonce you just entered. Immediately press and release the Volume Down button. Press and hold the Side Button and dont let go even when you see the Apple logo. Keep holding until you see the Recovery Mode screen. For iPhone 7 and 7 Plus. Press and hold the Side Button and the Volume Down button at the same time. Unable to restore iDevice -1. The flash with 3uTools its going to 19 and over. Last night my reliable iPhone 6s was unable to open any application without crashing. Naturally, I went for a forced reset and held down the power button and the home button and waited for the Apple logo to appear briefly before revealing the lock screen.

Unable To Restore Idevice 1 3utools — compugreat.

FREE SOFTWARE DOWNLOADS AND REVIEWS The most comprehensive source for freeware and shareware downloads on the Internet. Auto tune on modern warfare.Welcomeis the developer-supported, community-run subreddit for the Modern Warfare community.Call of Duty: Modern Warfare is a first-person shooter video game developed by Infinity Ward and published by Activision. Jan 12, 2020 Restore Apple Devices Without itunes using 3UTools — Duration: 7:20. Joker Soft 803,850 views.

Idevice 3utool — FREE SOFTWARE DOWNLOADS AND REVIEWS powered by Doodlekit.

Sep 23, 2020 I then tried 3utools and it got a lot further but it stoped at 80 saying sending FUDImageList and ERROR Unable to restore iDevice-1 anyone know. Unable to flash iOS Different errors on 3u and iTunes. My iPhone 5c wont flash with 3uTools as it comes up with. ERROR: Unable to restore iDevice-1. Its at 80 on updating baseband.

3utools Error Unable To Restore Idevice 26.

1. Update to the latest version of iTunes. 2. Third-party security software or router security settings can also cause this issue. 3. Downgrading to a previous version of iOS is not supported. 4. Edit out the quot;; redirect from your hosts file, and then restart the computer for the host file changes to take effect. If you decide to buy iOS device from another resource, you can install 3uTools to verify its authenticity. How to View verification report on 3uTools? Jan 08, 2017 ERROR: Unable to connect to device in restore mode ERROR: Unable to open device in restore mode ERROR: Unable to restore device. This comment has been minimized. Sign in to view. Step 1 Connect your iDevice to 3uTools and go to Flash amp; JB Advanced, and click Download 64-bit iDevice. Step 2 Read the popup carefully and click Select IPSW Select SHSH, and double check the generator nonce you just entered. Step 3 Select SHSH2 file, double check the generator nonce you just entered and click Yes to start.

Unable to Restore iDevice -2 3utools -1 Problem Fixed.

This box is a note. You can add and remove as many boxes as you want. Boxes can be used to display things like location info, store hours, pictures, ads, etc. Solution: Unplug the USB cable and plug it in the backward port of your computer. Re-launch 3uTools and restore again. 2. Lack of file. Cause:This reminder will exists if you rename the backup file. Solution: Rename the backup file to the name of DeviceID lowercase. How to check DeviceID: Launch 3uTools, go to iDevice, and click. In hardware, it#x27;s a communication problem. Check all connections, also try to change the battery.

3utools Error Unable To Restore Idevice 14 — potentplans.

Feb 06, 2018 According to some users, they fail to restore the backup of their iDevices on 3uTools. Lets keep reading and figure out the solutions. It is stuck at a random progress for long time. Cause: Unstable connection problem. Solution: Unplug the USB cable and plug it in the backward port of your computer.

3utools Error Unable To Restore Idevice 1 — bikesclever.

Download 3uTools for free, backup SHSH, and download the iOS firmware with a way rapid speed. 3utools Jailbreak possibilities. Step 4 Confirm the connection between iDevice and PC, patiently wait for 20 to 40 minutes. Your iDevice will be restored to unsigned iOS 12.0 12.1.2 then. Restore or Downgrade iOS12.0 12.1.2 with 3utools. IPhone 5c. The Apple iPhone 5c was announced on September 10, 2013. Repair of this device is similar to the previous models, and requires screwdrivers and prying tools. Download 3utools. Open 3utools and connect your i-device via USB cable. As it is connected you come to the window idevice and you can get ios version and Type there and keep them in mind. Then click on Flash amp; JB button. Click on firmwares section. And select your idevice Category and idevice name correctly.