Dns сервер ошибка 4004

  • Remove From My Forums
  • Общие обсуждения

  • Добрый день!

    Устал искать и бороться с ошибками DNS 4004 и 4015 на Win 2012 R2. Может,  кто ни будь  помочь.

    Сервер с двумя сетевыми картами одна в интернет, другая внутрь. Роли AD, DNS, DHCP, NAT. Убрана регистрация внешнего сетевоо адептера в DNS, настроена пересылка в DNS. DNS сервер слушает только внутреннюю сеть, адрес DNS на всех сетевых
    интерфейсах внутренний. Через каждые 5-10 минут в журнале ошибки 4004 и 4015.

    4015 DNS-сервер обнаружил критическую ошибку Active Directory. Проверьте работоспособность Active Directory. Дополнительная отладочная информация об ошибке: «» (может отсутствовать). Данные о событии содержат сведения об ошибке.

    4004 DNS-серверу не удалось завершить перечисление зоны . в службе каталогов.  Этот DNS-сервер настроен для получения и использования данных из Active Directory для указанной зоны и без них не может загрузить зону.  Проверьте, нормально
    ли работает Active Directory, и повторите перечисление зоны. Дополнительная отладочная информация об ошибке: «» (может отсутствовать). Данные о событии содержат сведения об ошибке.

    И т.д.

    Уже перечитал все, что мог. Подскажите где, что еще проверить. Спасибо заранее.

    • Изменено

      15 января 2015 г. 10:44

    • Изменен тип
      Petko KrushevMicrosoft contingent staff, Moderator
      28 января 2015 г. 8:52

If you’re getting DNS error 4004 on your computer, we hope this guide can help you fix it.

Approved: Fortect

  • 1. Download Fortect and install it on your computer
  • 2. Launch the program and click «Scan»
  • 3. Click «Repair» to fix any issues that are found
  • Speed up your computer’s performance now with this simple download.

    This DNS server uses Active Directory information for this zone and ultimately cannot load the zone without it. Make sure Active Directory is working correctly, but re-number the zone.

    dns error event 4004

    My DNS server was up and running yesterday. I noticed that some devices are unable to view, so I tried to test my DNS server successfully because people responded that the DNS server could not be contacted. I tried to copy the reason for the prompts, but the server could not be contacted at all.I ran nslookup but most of the internet IP requests are timed as wellThe DNS server itself cannot start the Internet.I tried again the next morning without successI’ve tried everything too and now I’ve come to an endI copied the cache from System 32, the game did not workI deleted the zone and recreated the role, but it’s still the samethe server name allows this and client systems can ping everythingbut no one on my network wants to connect to the internetplease someone useful information please help methanks a lot

    It looks like your personal DNS server is having connection problems. Can clients check if the DNS server is connected and does it actually have access to the Internet?

    Ping the IP address of the DNS server (4.2.2.1 is another easy one to remember) and if you see it, you get the result.

    Approved: Fortect

    Fortect is the world’s most popular and effective PC repair tool. It is trusted by millions of people to keep their systems running fast, smooth, and error-free. With its simple user interface and powerful scanning engine, Fortect quickly finds and fixes a broad range of Windows problems — from system instability and security issues to memory management and performance bottlenecks.

  • 1. Download Fortect and install it on your computer
  • 2. Launch the program and click «Scan»
  • 3. Click «Repair» to fix any issues that are found
  • The server is not broken. So I don’t want to do anything important, like install and remove DNS.

    dns error event 4004

    This domain has ONE domain with two NICs and does all the functions, DHCP, DNS, Internet gateway, etc., DNS

    The site was unable to add or create an update for the ds domain name in the DS.IMC2.COM zone in Active Directory. Make sure Active Directory is working correctly and add or update this domain username in the DNS console. Longest error Debug information (which may be empty) will look like “”. These events will contain all errors.

    every 6 minutes (TTL?) or own rash, good 5 or later 4004:

    The DNS server was unable to move the directory service out of the enumeration zone. This DNS server is configured to use facts and policies receivedx from Active Directory for this level, and will not be able to load the region without them. Make sure Active Directory works correctly and repeats the enumeration of most sections. Extended error debugging resources (which can be empty): “”. The circumstance data contains an error.

    dns error event 4004

    The server, the dynamic naming service, encountered a critical error in its primary Active Directory. Make sure Active Directory is working properly. Extended monitoring debug information can often be “” (which can be empty). These events contain an error.

    I have Windows Small Business Server 2003 R2 which generates the following error:

    The DNS hosting was unable to complete the enumeration of referral sites for the DOMAINNAME.local zone. [The actual domain label is displayed in the text zone.DOMAINNAME.local]. This DNS server is configured to use reports from Active Directory for this sector and will not be able to load the region without it. Make sure Active Directory is working correctly and re-enumerate most of the zones. Extended debug information and facts (which may be empty) are “”. Opportunity dates containingt mistake.

    *** Provided by TechSoEasy ***
    You can also find an identical error message at http: Q_23024027.html, but only post all comments in this request.

    Speed up your computer’s performance now with this simple download.

    4004 and 4015, let focus on event ID 4515 — AD DNS Issue

    Event ID : 4015

    The DNS server has encountered a critical error from the Active Directory.

    Check that the Active Directory is functioning properly. The extended error

    debug information (which may be empty) is «». The event data contains the

    error.

    EVENT ID : 4004

    The DNS server was unable to complete directory service enumeration of zone

    .. This DNS server is configured to use information obtained from Active

    Directory for this zone and is unable to load the zone without it. Check

    that the Active Directory is functioning properly and repeat enumeration of

    the zone. The extended error debug information (which may be empty) is «».

    The event data contains the error.

    4004

    The DNS server was unable to complete directory service enumeration of zone

    _msdcs.testing.local. This DNS server is configured to use information

    obtained from Active Directory for this zone and is unable to load the zone

    without it. Check that the Active Directory is functioning properly and

    repeat enumeration of the zone. The extended error debug information (which

    may be empty) is «». The event data contains the error.

    4515

    The zone testing.local was previously loaded from the directory partition

    MicrosoftDNS but another copy of the zone has been found in directory

    partition DomainDnsZones.testing.local. The DNS Server will ignore this new

    copy of the zone. Please resolve this conflict as soon as possible.

    If an administrator has moved this zone from one directory partition to

    another this may be a harmless transient condition. In this case, no action

    is necessary. The deletion of the original copy of the zone should soon

    replicate to this server.

    If there are two copies of this zone in two different directory partitions

    but this is not a transient caused by a zone move operation then one of these

    copies should be deleted as soon as possible to resolve this conflict.

    To change the replication scope of an application directory partition

    containing DNS zones and for more details on storing DNS zones in the

    application directory partitions, please see Help and Support

    Solution:

    From the description, I understand that you receive DNS Event ID 4004, 4015, 4515 on your DC. If I have misunderstood, please let me know.

    First of all, I would like to know if you have any DNS name resolution issue on your network due to the DNS errors.

    Regarding DNS Event ID 4004, 4015

    ======================

    Based on my research, if these events are logged when the server starts, this is because the DNS service starts before AD is ready and therefore it cannot load information such as AD-integrated zone from Active

    Directory. These events can be safely ignored as long as DNS service runs correctly after AD starts.

    To resolve the problem, I have the following suggestions:

    Suggestion 1: Delay DNS service during startup

    =========

    We can delay DNS service during startup until Netlogon service is started. In this way, these events may not occur. To do so, please follow these steps:

    1. Open Registry on the DC by using «regedit» command.

    2. Browse to HK_LOCAL_MACHINE\System\CurrentControlSet\Services\DNS

    3. Double click «DependOnService» and add Netlogon at the bottom. Please do not remove any values in this key.

    4. If «DependOnService» does not exist, we need to create muitl-string value «DependOnService» (without the quotation marks) and add Netlogon to it.

    5. Click OK and restart the DC.

    Suggestion 2: Ensure that Windows Time service is Started

    =========

    Please go to Services console (services.msc) and ensure that Windows Time service is set as Automatic and Started. Restart the DC to take effect.

    Suggestion 3: Restart DNS and Net Logon services

    =========

    Open a Command Prompt and run «net stop dns» & «net stop netlogon». Go to C:\Windows\system32\config\, delete netlogon.dns and netlogon.dnb. Run «net start dns» & «net start netlogon». Let’s restart the DC

    again to check if the issue persists.

    Also, please ensure that on this DC’s NIC, preferred DNS server is pointing to the DC itself. Alternate DNS server can point to another DNS in the domain or just leave it blank. Please ensure that no external DNS

    server is set on any NIC.

    Please take your time to try my suggestions and let me know the result.

    Regarding DNS Event ID 4515

    ======================

    This issue may occur when the DNS zone that is listed in the Event 4515 exists in more than one location in Active Directory. A DNS zone may be incorrectly created in more than one location in Active Directory in

    the following scenarios:

    1. The DNS zone was moved from one directory partition to another directory partition.

    2. The replication scope for Windows 2000 Active Directory integrated DNS zones are transitioned to domain DNS application partitions or to forest-wide DNS application partitions that are supported by

    Windows Server 2003 domain controllers.

    To resolve the problem, please try the steps described in the following article:

    Event ID 4515 is logged in the DNS Server log in Windows Server 2003 http://support.microsoft.com/kb/867464

    If these errors are still reported on this DC, please check the following and see if there are any incorrect settings.

    Step 1: Verify if the DNS server is only listening on the internal interface.

    =========

    If the DNS server is multi-homed or acts as a RRAS server, please ensure that the DNS server should be set to listen on «only the following IP addresses» using the IP address in the range of your internal network

    to service DNS requests. This can help prevent the additional interfaces from registering in DNS which can cause conflicts when the default option to listen on «All IP addresses» is chosen. To check this, please

    follow these steps:

    1. Click Start->Run, type dnsmgmt.msc and click OK to open the DNS MMC.

    2. Right-click the DNS server and select Properties.

    3. In Interfaces tab, please check if the DNS server only listens on internal interface in Listen on list.

    Step 2: Verify if the Root Hints tab has the FQDN and IP address of all root servers listed.

    =========

    1. Click Start->Run, type dnsmgmt.msc and click OK to open the DNS MMC.

    2. Right-click the DNS server and select Properties.

    3. Click the Root Hints tab, check if the FQDN and IP address of all root servers are listed.

    4. If not, we can open root hints from another DNS server which contains the information.

    5. To copy root hints from a DNS server, we can:

    a) In Root Hints tab, click the Copy from Server button.

    b) Type the IP address of the DNS server from which you want to copy a list of root servers to use in resolving queries.

    c) Click OK and wait until it finishes.

    Step 3: Verify if the DNS setting is correct on client computer.

    =========

    1. Click Start, point to Control Panel, point to Network Connections.

    2. Right-click the Local Area Connection and select Properties.

    3. In General tab, double click Internet Protocol (TCP/IP).

    4. Click Advanced.

    5. Click the DNS tab, verify that the «Append primary and connection specific DNS suffixes» and «Append parent suffixes of the primary DNS suffix» options are chosen.

    6. Verify that the host is configured to «Register this connection’s addresses in DNS», but not configure to «Use this connection’s DNS suffix in DNS registration»

    If all of the above are correct, please collect Directory Service MPS report on this problematic DC and send to me for further research.

    a. Please download the Microsoft Product Support Reporting tool from the link below:

    http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_Dirsvc.EXE

    b. Run the tool on the DC.

    c. The program creates: C:\WINDOWS\MPSReports\<

    >\Reports\cab\COMPUTER_MPSReports.CAB. Where COMPUTER will be replaced with your computer name.

    d: Once the folder opens up in Windows Explorer, please send me the CAB file of the server that includes your computer’s name.

    e. If there is no CAB file created, please zip all the files in C:\WINDOWS\MPSReports\<>\Reports.

    For we can safe ignore event ID 4004 and 4015, let focus on event ID 4515.

    Normally, event ID 4515 is caused by replication error or duplicated zone

    in Active Directory. After checking the events log of File Replication

    Service and Directory Service, I cannot find any error or warning related

    to replication. So we should check if we have duplication zones (which

    cause confliction) in Active Directory.

    The problem probably occurred while both 2000 and 2003 DCs were co-existing

    and at least one of the 2000 DCs was still running the DNS service. When

    switching over to 2003, or even 2003 to 2008, you have to keep the two

    different replication scopes to be backward compatible until you uninstall

    DNS (not delete the zone from 2000). Once you’ve uninstalled DNS from ALL

    2000 DCs, and then is it safe to change the replication scope.

    We can try the following steps to check and delete duplicated DNS zone:

    1. Click Start, click Run, type adsiedit.msc, and then click OK.

    2. In the console tree, right-click ADSI Edit, and then click Connect to.

    3. Click Select or type a Distinguished Name or Naming Context, type the

    following text in the list, and then click OK: DC=DomainDNSZones, DC=

    testing, DC=com.

    4. In the console tree, double-click DC=DomainDNSZones, DC= testing,

    DC=com

    5. Double-click CN=MicrosoftDNS, and click the zone (testing.local). You

    should now be able to view the DNS records which exist in this DNS

    partition. If you desire to remove this partition, right-click on

    contoso.com and then click Delete.

    Note Deleting a zone is a destructive operation. Please confirm that a

    duplicate zone exists before you perform a deletion.

    If you have deleted a zone, restart the DNS service. To do this, follow

    these steps:

    1. Click Start, point to All Programs, point to Administrative Tools, and

    then click DNS.

    2. In the console tree, right-click testing.local, point to All Tasks, and

    then click Restart.

    Good day.

    There is an infrastructure of two sites. Site A contains three DC 2012 R2 in 2008R2 mode (let’s call them conditionally A1, A2, A3), each has a DNS service. Site B contains two RODC 2012 R2 (let’s call them conditionally B1, B2), each has a DNS service.

    The last two weeks on A1, A2 and B1 are the following errors:

     4004
    The time during which the DNS server tried to execute the «—» operation of the Active Directory service timed out. Verify that Active Directory is functioning correctly. Event data contains error information.

    The DNS server could not complete the enumeration of the 39.168.192.in-addr.arpa zone in the directory service. This DNS server is configured to retrieve and use data from Active Directory for the specified zone and can not load the zone without them. Check
    that the Active Directory is working properly, and repeat the enumeration of the zone. Additional debugging error information: «» (may be absent). Event data contains error information.

    4016
    The time during which the DNS server tried to execute on «DC = 36, DC = 200.10.10.in-addr.arpa, cn = MicrosoftDNS, DC = DomainDnsZones, DC = DOMAINNAME, DC = en» is an Active Directory service operation. Verify that Active Directory is functioning
    correctly. Event data contains error information.

    The time during which the DNS server tried to execute on «DC = SERVERNAME, DC = DOMAINNAME.ru, cn = MicrosoftDNS, DC = DomainDnsZones, DC = DOMAINNAME, DC = en» is an Active Directory service operation. Verify that Active Directory is functioning
    correctly. Event data contains error information.

    The time during which the DNS server tried to execute on «DC = _ldap._tcp.gc, DC = _msdcs.DOMAINNAME.ru, cn = MicrosoftDNS, DC = ForestDnsZones, DC = DOMAINNAME, DC = en» is an Active Directory service operation. Verify that Active Directory is functioning
    correctly. Event data contains error information.

    The time during which the DNS server tried to execute on «DC = WORKSTATIONNAME, DC = DOMAINNAME.ru, cn = MicrosoftDNS, DC = DomainDnsZones, DC = DOMAINNAME, DC = en» is an Active Directory service operation. Verify that Active Directory is functioning
    correctly. Event data contains error information.

    At the same time, there are no visible failures in the domain. Everything functions without problems. Errors are strewed for 6-8 hours with a period of 10 hours. Infrastructure in the form in which it operates is now more than a year and no changes have been
    made to it. Suddenly these errors fell.

    In the AD logs there are no errors — from the word «absolutely»!

    Dcdiag passes almost without errors. Those that it catches are related to stopping replication because of the backup systemstate.

    I did not find a solution to the problem, although many people write about this.

    Step 1 – Solve Microsoft Dns Error 4004

    Is Microsoft Dns Error 4004 appearing? Would you like to safely and quickly eliminate event id 4004 which additionally can lead to a blue screen of death?

    When you manually edit your Windows Registry trying to take away the invalid event id 4004 the windows logon process keys you’re taking a authentic chance. Unless you’ve got been adequately trained and experienced you’re in danger of disabling your computer system from working at all. You could bring about irreversible injury to your whole operating system. As very little as just 1 misplaced comma can preserve your Pc from even booting every one of the way by!

    Troubleshooting event id 4004 dfsr Windows XP, Vista, 7, 8 & 10

    Simply because this chance is so higher, we hugely suggest that you make use of a trusted registry cleaner plan like CCleaner (Microsoft Gold Partner Licensed). This system will scan and then fix any Microsoft Dns Error 4004 complications.

    Registry cleaners automate the entire procedure of finding invalid registry entries and missing file references (including the 4004 error) likewise as any broken hyperlinks inside of your registry.

    Issue with event id 4004 winlogon

    Backups are made immediately prior to each and every scan providing you with the choice of undoing any changes with just one click. This protects you against doable damaging your pc. Another advantage to these registry cleaners is that repaired registry errors will strengthen the speed and performance of one’s procedure drastically.

    • https://social.technet.microsoft.com/Forums/windowsserver/en-US/91992292-294e-42da-8ba9-47df687684ac/event-id-4004-dns-server-was-unable-to-complete-directory-service-enumeration-of-zone?forum=winserverDS
    • http://www.edugeek.net/forums/windows/10775-dns-problems-event-id-4004-a.html
    • http://www.eventid.net/display-eventid-4004-source-DNS-eventno-334-phase-1.htm
    • https://technet.microsoft.com/en-us/library/dd349602(v=ws.10).aspx

    Cautionary Note: Yet again, for those who are not an state-of-the-art consumer it’s very encouraged that you simply refrain from editing your Windows Registry manually. If you make even the smallest error within the Registry Editor it can result in you some serious issues that may even call for a brand new set up of Windows. Not all difficulties attributable to incorrect Registry Editor use are solvable.

    Fixed: dns 4015

    Symptoms of Microsoft Dns Error 4004
    “Microsoft Dns Error 4004” appears and crashes the energetic method window.
    Your Personal computer routinely crashes with Microsoft Dns Error 4004 when running the exact same system.
    “Microsoft Dns Error 4004” is shown.
    Windows operates sluggishly and responds little by little to mouse or keyboard input.
    Your computer periodically “freezes” for the number of seconds in a time.

    Will cause of Microsoft Dns Error 4004

    Corrupt obtain or incomplete set up of Windows Operating System software program.

    Corruption in Windows registry from a new Windows Operating System-related application adjust (install or uninstall).

    Virus or malware infection which has corrupted Windows method documents or Windows Operating System-related application data files.

    Another method maliciously or mistakenly deleted Windows Operating System-related files.

    Mistakes this sort of as “Microsoft Dns Error 4004” can be brought about by several different elements, so it really is important that you troubleshoot every of the achievable brings about to forestall it from recurring.

    Simply click the beginning button.
    Variety “command” inside the lookup box… Will not hit ENTER nonetheless!
    Although keeping CTRL-Shift in your keyboard, hit ENTER.
    You’re going to be prompted that has a authorization dialog box.
    Click on Of course.
    A black box will open having a blinking cursor.
    Variety “regedit” and hit ENTER.
    Within the Registry Editor, choose the event id 4004 the windows logon process connected key (eg. Windows Operating System) you wish to back again up.
    Within the File menu, choose Export.
    Inside the Preserve In list, pick out the folder in which you wish to save the Windows Operating System backup key.
    Inside the File Title box, sort a reputation for the backup file, these types of as “Windows Operating System Backup”.
    From the Export Vary box, ensure that “Selected branch” is selected.
    Click on Help you save.
    The file is then saved by using a .reg file extension.
    You now use a backup within your event id 4004 dfsr related registry entry.

    Solution to your event id 4004 dfs replication problem

    There are actually some manual registry editing measures that can not be talked about in this article due to the high chance involved for your laptop or computer method. If you want to understand more then check out the links below.

    Additional Measures:

    One. Conduct a Thorough Malware Scan

    There’s a probability the 4004 Error Dns Microsoft error is relevant to some variety of walware infection. These infections are malicious and ready to corrupt or damage and possibly even delete your ActiveX Control Error files. Also, it’s attainable that your Microsoft Dns Error 4004 is actually connected to some element of that malicious plan itself.

    2. Clean dns error 4015 Disk Cleanup

    The a lot more you employ your computer the extra it accumulates junk files. This comes from surfing, downloading packages, and any sort of usual computer system use. When you don’t clean the junk out occasionally and keep your program clean, it could turn into clogged and respond slowly. That is when you can encounter an Microsoft error because of possible conflicts or from overloading your hard drive.

    Once you clean up these types of files using Disk Cleanup it could not just remedy Microsoft Dns Error 4004, but could also create a dramatic change in the computer’s efficiency.

    Tip: While ‘Disk Cleanup’ is definitely an excellent built-in tool, it even now will not completely clean up event id discovered on your PC. There are numerous programs like Chrome, Firefox, Microsoft Office and more, that cannot be cleaned with ‘Disk Cleanup’.

    Since the Disk Cleanup on Windows has its shortcomings it is extremely encouraged that you use a specialized sort of challenging drive cleanup and privacy safety application like CCleaner. This system can clean up your full pc. If you run this plan after each day (it could be set up to run instantly) you are able to be assured that your Pc is generally clean, often operating speedy, and always absolutely free of any Microsoft error associated with your temporary files.

    How Disk Cleanup can help error 404

    1. Click your ‘Start’ Button.
    2. Style ‘Command’ into your search box. (no ‘enter’ yet)
    3. When holding down in your ‘CTRL-SHIFT’ important go ahead and hit ‘Enter’.
    4. You will see a ‘permission dialogue’ box.
    5. Click ‘Yes’
    6. You will see a black box open up plus a blinking cursor.
    7. Variety in ‘cleanmgr’. Hit ‘Enter’.
    8. Now Disk Cleanup will start calculating the amount of occupied disk space you will be able to reclaim.
    9. Now a ‘Disk Cleanup dialogue box’ seems. There will be a series of checkboxes for you personally to pick. Generally it will likely be the ‘Temporary Files’ that consider up the vast majority of your disk area.
    10. Verify the boxes that you want cleaned. Click ‘OK’.

    How to repair

    3. System Restore can also be a worthwhile device if you ever get stuck and just desire to get back to a time when your computer system was working ideal. It will work without affecting your pics, paperwork, or other crucial information. You can discover this option with your User interface.

    event id

    Manufacturer

    Device

    Operating System


    Microsoft Dns Error 4004


    4 out of
    5

    based on
    51 ratings.

     

    Понравилась статья? Поделить с друзьями:
  • Document feeder mispick reload ошибка
  • Dors 750 ошибка калибровки что делать
  • Dns сервер обнаружил ошибку при попытке загрузить зону
  • Docucolor 250 ошибка 042 326 xerox
  • Dns сервер не отвечает ошибка 651