Coapi 2041 ncs expert ошибка

     

08-17-2018, 12:44 PM

 
#1

Captain

Canada

Drives: 2011 E90 335i xDrive

Join Date: Feb 2018

Location: Gatineau

NCS Expert Error in CABD COAPI: 2041


Hey guys, I own a 2011 BMW 335xi N55 E90.

Today I tried replacing my 90ah battery to a 70ah using a guide on this link.

https://www.e90post.com/forums/showthread.php?t=1338302

I was following Option 5, (Method where I change vehicle order through NCS Expert) but when I hit «F1 (Code Car) I’ve got an error message from NCS expert an it said that the coding failed (This was at the second Step 7 from the Option 5) of the above link).

Here is the error code:

Error in CABD! Look at CABI.ERR and ERROR.LOG!

COAPI-2041: Falscher SG-Cidierindex A_PL2FRX: CODIERINDEX = 33h
FRM2_E89.C08: CODIERINDEX = 8
COAPI-2041: Falscher SG-Codierindex CODIERDATEN_LESEN

I tried on two computers, one with Windows 7 64-Bit and the other Winows 10 64-Bit. Both of them had the same error. I was using the BimmerGeeks Pro K+Dcan cable and had drivers installed for USB converted as well as my COM Port setup to #1 with a latency of 1.

I ended up doing Option 4 so I got my battery to work. I just want to figure out why it is not working for future coding I might do.

Thanks a lot ladds!

     

08-17-2018, 05:50 PM

 
#2

Sua Sponte

LMB335IS's Avatar

United_States

Drives: 2013 LMB 335is

Join Date: May 2008

Location: FOB FL

iTrader: (21)

Garage List

The first thing I see wrong in both procedures in option 5 is that you should be using factory coding profile WITHOUT manipulation. With the bimmergeeks software it would be the factory coding profile. Did you go back after changing the VO and verify that the VO did change?

__________________


335is/DCT-M3 GTS software-M3 drivetrain-M3 GWS-KOMBI-DSC-SZL/MHD/BQ Tuning IG@ClustersandCoding

     

08-18-2018, 01:41 PM

 
#3

Captain

Canada

Drives: 2011 E90 335i xDrive

Join Date: Feb 2018

Location: Gatineau

Hmmm ok, that is weird because in the posts it says to use a profile that has manipulation enabled.

Anyways, yes I did manage to do Step 1 to 20 and change my VO. I changed the -B090 for the battery to -B070. I went back and checked if it saved and it successfully did.

The only part that did not work was really the last step of Option 5 which was «Code Car».

Other than the profile that I was using was the one provided with the software, the «Dummy Profile».


Last edited by TheGoodTheBadTheUgly; 08-18-2018 at 01:49 PM..

     

08-19-2018, 12:04 PM

 
#4

Sua Sponte

LMB335IS's Avatar

United_States

Drives: 2013 LMB 335is

Join Date: May 2008

Location: FOB FL

iTrader: (21)

Garage List

Check both your profiles. Load a profile then go back and pick edit profile. Click through the password and click the FSW/PSW button and see if the FSW/PSW manipulation box is checked. You want to have one profile with it checked and one without. The profile that’s checked is used for making actual changes, the unchecked one if used for default coding which is what you want to do after you change the VO. Default coding codes the car based on the VO back to factory specs which is what you’re trying to do to apply the changes based on the new VO you have.

While you’re in the edit screen of your profiles you can change the name of it to whatever you want so you’ll know exactly what the profile will be used for.

__________________


335is/DCT-M3 GTS software-M3 drivetrain-M3 GWS-KOMBI-DSC-SZL/MHD/BQ Tuning IG@ClustersandCoding

     

08-19-2018, 06:14 PM

 
#5

Captain

Canada

Drives: 2011 E90 335i xDrive

Join Date: Feb 2018

Location: Gatineau

Ok I am pretty sure that might be it. I will try it and tell you what happens. It’s just odd that they told me to load a profile that had manupulations enabled for the second part.

Anyways thanks for all!

     

08-19-2018, 06:21 PM

 
#6

Banned

Drives: BMW 3 Series (E90

Join Date: Apr 2018

Location: US

Quote:

Originally Posted by LMB335IS
View Post

Check both your profiles. Load a profile then go back and pick edit profile. Click through the password and click the FSW/PSW button and see if the FSW/PSW manipulation box is checked. You want to have one profile with it checked and one without. The profile that’s checked is used for making actual changes, the unchecked one if used for default coding which is what you want to do after you change the VO. Default coding codes the car based on the VO back to factory specs which is what you’re trying to do to apply the changes based on the new VO you have.

While you’re in the edit screen of your profiles you can change the name of it to whatever you want so you’ll know exactly what the profile will be used for.

+1

     

08-19-2018, 07:15 PM

 
#7

Sua Sponte

LMB335IS's Avatar

United_States

Drives: 2013 LMB 335is

Join Date: May 2008

Location: FOB FL

iTrader: (21)

Garage List

Quote:

Originally Posted by TheGoodTheBadTheUgly
View Post

Ok I am pretty sure that might be it. I will try it and tell you what happens. It’s just odd that they told me to load a profile that had manupulations enabled for the second part.

Anyways thanks for all!

That’s because that post is wrong and no one’s ever corrected it. Not to mention the coding procedures in step 4 are archaic. There’s much quicker and easier ways to code using either NCS Dummy or the BMW Coding Tool.

__________________


335is/DCT-M3 GTS software-M3 drivetrain-M3 GWS-KOMBI-DSC-SZL/MHD/BQ Tuning IG@ClustersandCoding

     

08-19-2018, 08:01 PM

 
#8

Captain

Canada

Drives: 2011 E90 335i xDrive

Join Date: Feb 2018

Location: Gatineau

Quote:

Originally Posted by LMB335IS
View Post

That’s because that post is wrong and no one’s ever corrected it. Not to mention the coding procedures in step 4 are archaic. There’s much quicker and easier ways to code using either NCS Dummy or the BMW Coding Tool.

I see haha I ended up doing the Option 4 because it was the only one that I could make work. Should I still modify the VO order and code it like in option 5 or option 4 was enough?


Last edited by TheGoodTheBadTheUgly; 08-19-2018 at 08:30 PM..

     

08-19-2018, 08:10 PM

 
#9

Sua Sponte

LMB335IS's Avatar

United_States

Drives: 2013 LMB 335is

Join Date: May 2008

Location: FOB FL

iTrader: (21)

Garage List

Quote:

Originally Posted by TheGoodTheBadTheUgly
View Post

Quote:

Originally Posted by LMB335IS
View Post

That’s because that post is wrong and no one’s ever corrected it. Not to mention the coding procedures in step 4 are archaic. There’s much quicker and easier ways to code using either NCS Dummy or the BMW Coding Tool.

I see haha I ended up doing the Option 4 because it was the only one that I could make work. Should I still modify the VO order and cose it like in option 5 or option 4 was enough

Option 4 works. Just be mindful that if the car is ever updated or has a module replaced, especially by the dealership, that the coding will be erased when they do a blanket update. Other than that you should never have a issue.

__________________


335is/DCT-M3 GTS software-M3 drivetrain-M3 GWS-KOMBI-DSC-SZL/MHD/BQ Tuning IG@ClustersandCoding

     

08-19-2018, 08:31 PM

 
#10

Captain

Canada

Drives: 2011 E90 335i xDrive

Join Date: Feb 2018

Location: Gatineau

Quote:

Originally Posted by LMB335IS
View Post

Option 4 works. Just be mindful that if the car is ever updated or has a module replaced, especially by the dealership, that the coding will be erased when they do a blanket update. Other than that you should never have a issue.

Great thanks for everything. I really appreciate it!

     

07-07-2021, 11:13 AM

 
#11

Enlisted Member

Drives: e90

Join Date: Mar 2011

Location: turkey

I have the same problem. (Same error message) Frm cannot be read and coded in ncs (Both sg codieren and codierdaten lesen don’t work) But it works when writing FA into frm. I may succesfully write FA into frm. I noticed something. Frm cannot be coded with Autologic either. I am able to reset the frm with Autologic, but not code. Both smcs are broken. Could this be why the frm can’t be read and coded?

     

07-08-2021, 04:09 AM

 
#12

Enlisted Member

Drives: e90

Join Date: Mar 2011

Location: turkey

Update.
Problem is solved. Maybe that helps someone. Well you may get that error if your car has a frm, and you have updated your car’s build date to #0909 to code the cic. In my issue, that was exactly so. Ncs wanted to see ancient frm as frm2_c08 and didn’t code it. When I again coded factory build date in VO, ncs has seen the frm and i managed to read it.

  • Home
  • Forum
  • General BMW Discussion
  • Diagnostic Software
  • NCS Expert Coding Issue (COAPI-2041)

  1. NCS Expert Coding Issue (COAPI-2041)

    Hi,

    Hope someone could help… I have a 2009 E87 that I have been able to code successfully with NCS Expert in the past. Unfortunately the FRM module fried one day and the service shop replaced it with a new part. To make it work they had to program the car. That bounced up the I-level to E89X-18-07-520 (factory E89X-09-09-516). I assume some modules also got updated software.

    My issue is that when I try to execute Read ECU or CODIERDATEN_LESEN for NFRM NCS Expert complains that COAPI-2041: Wrong ECU coding index A_PL2FRX: CODIERINDEX = 33h FRM2_E89.C08: CODIERINDEX = 08. I believe the car did not have index 08 in the past either since looking at my backup files the car used to have FRM3_E89.C32 when exported from NCS Expert.

    Do I have wrong settings in my NCS Expert or do I need to get new daten files somewhere? Or how can I overcome this issue?

    Then I do have another question as well. When I look at the ECU module details in ISTA, the Encoding Index does tie back to NCS Expert index once the ECU is read for some modules but not all. Should those be the same? Like for KOMBI ISTA shows encoding index 8 and NCS Expert pulls KMBI_PL2.C08 as well. Can I use this to determine if the module got flashed at the service? Or are these something completely different things.

    Any help would be appreciated… would like to get some of my changes back.

    -p


  2. I would start with looking for the newest possible FRM3_E89.C** coding file, which should be a fairly easy starting point, and then use Tool Set and the FRM3.prg, to look for the date of the last flash-programming session. The module is responding to diagnostic requests, so I would imagine it’s an NCS file issue.


Similar Threads

  1. Replies: 5

    Last Post: 05-15-2023, 10:26 AM

  2. Replies: 20

    Last Post: 03-12-2014, 04:09 PM

  3. Replies: 0

    Last Post: 03-06-2012, 02:27 PM

  4. Replies: 28

    Last Post: 10-22-2011, 12:34 PM

  5. Replies: 5

    Last Post: 07-28-2010, 03:20 PM

Bookmarks

Bookmarks


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
  • BB code is On
  • Smilies are On
  • [IMG] code is On
  • [VIDEO] code is On
  • HTML code is Off

Forum Rules

Step 1 – Solve Ncs Expert Error 2041

Is Ncs Expert Error 2041 appearing? Would you like to safely and quickly eliminate Ncs Expert Error which additionally can lead to a blue screen of death?

When you manually edit your Windows Registry trying to take away the invalid keys you’re taking a authentic chance. Unless you’ve got been adequately trained and experienced you’re in danger of disabling your computer system from working at all. You could bring about irreversible injury to your whole operating system. As very little as just 1 misplaced comma can preserve your Pc from even booting every one of the way by!

Troubleshooting Windows XP, Vista, 7, 8 & 10

Simply because this chance is so higher, we hugely suggest that you make use of a trusted registry cleaner plan like CCleaner (Microsoft Gold Partner Licensed). This system will scan and then fix any Ncs Expert Error 2041 complications.

Registry cleaners automate the entire procedure of finding invalid registry entries and missing file references (including the Error error) likewise as any broken hyperlinks inside of your registry.

Issue with

Backups are made immediately prior to each and every scan providing you with the choice of undoing any changes with just one click. This protects you against doable damaging your pc. Another advantage to these registry cleaners is that repaired registry errors will strengthen the speed and performance of one’s procedure drastically.

  • http://www.bimmerfest.com/forums/showthread.php?t=787529
  • http://forum.bmw5.co.uk/topic/70687-really-fed-up-help-with-ncs-expert-please/
  • http://www.northamericanmotoring.com/forums/electrical/240952-ncs-expert-help-r52-kmb-read-write-error-coapi-2041-wrong-ecu-coding-index.html
  • http://www.bimmerforums.com/forum/showthread.php?1553779-NCS-Dummy-Taking-the-expert-out-of-NCS-Expert/page12

Cautionary Note: Yet again, for those who are not an state-of-the-art consumer it’s very encouraged that you simply refrain from editing your Windows Registry manually. If you make even the smallest error within the Registry Editor it can result in you some serious issues that may even call for a brand new set up of Windows. Not all difficulties attributable to incorrect Registry Editor use are solvable.

Fixed:

Symptoms of Ncs Expert Error 2041
“Ncs Expert Error 2041” appears and crashes the energetic method window.
Your Personal computer routinely crashes with Ncs Expert Error 2041 when running the exact same system.
“Ncs Expert Error 2041” is shown.
Windows operates sluggishly and responds little by little to mouse or keyboard input.
Your computer periodically “freezes” for the number of seconds in a time.

Will cause of Ncs Expert Error 2041

Corrupt obtain or incomplete set up of Windows Operating System software program.

Corruption in Windows registry from a new Windows Operating System-related application adjust (install or uninstall).

Virus or malware infection which has corrupted Windows method documents or Windows Operating System-related application data files.

Another method maliciously or mistakenly deleted Windows Operating System-related files.

Mistakes this sort of as “Ncs Expert Error 2041” can be brought about by several different elements, so it really is important that you troubleshoot every of the achievable brings about to forestall it from recurring.

Simply click the beginning button.
Variety “command” inside the lookup box… Will not hit ENTER nonetheless!
Although keeping CTRL-Shift in your keyboard, hit ENTER.
You’re going to be prompted that has a authorization dialog box.
Click on Of course.
A black box will open having a blinking cursor.
Variety “regedit” and hit ENTER.
Within the Registry Editor, choose the connected key (eg. Windows Operating System) you wish to back again up.
Within the File menu, choose Export.
Inside the Preserve In list, pick out the folder in which you wish to save the Windows Operating System backup key.
Inside the File Title box, sort a reputation for the backup file, these types of as “Windows Operating System Backup”.
From the Export Vary box, ensure that “Selected branch” is selected.
Click on Help you save.
The file is then saved by using a .reg file extension.
You now use a backup within your related registry entry.

Solution to your problem

There are actually some manual registry editing measures that can not be talked about in this article due to the high chance involved for your laptop or computer method. If you want to understand more then check out the links below.

Additional Measures:

One. Conduct a Thorough Malware Scan

There’s a probability the 2041 Error Expert Ncs error is relevant to some variety of walware infection. These infections are malicious and ready to corrupt or damage and possibly even delete your ActiveX Control Error files. Also, it’s attainable that your Ncs Expert Error 2041 is actually connected to some element of that malicious plan itself.

2. Clean Disk Cleanup

The a lot more you employ your computer the extra it accumulates junk files. This comes from surfing, downloading packages, and any sort of usual computer system use. When you don’t clean the junk out occasionally and keep your program clean, it could turn into clogged and respond slowly. That is when you can encounter an Ncs error because of possible conflicts or from overloading your hard drive.

Once you clean up these types of files using Disk Cleanup it could not just remedy Ncs Expert Error 2041, but could also create a dramatic change in the computer’s efficiency.

Tip: While ‘Disk Cleanup’ is definitely an excellent built-in tool, it even now will not completely clean up Ncs Expert discovered on your PC. There are numerous programs like Chrome, Firefox, Microsoft Office and more, that cannot be cleaned with ‘Disk Cleanup’.

Since the Disk Cleanup on Windows has its shortcomings it is extremely encouraged that you use a specialized sort of challenging drive cleanup and privacy safety application like CCleaner. This system can clean up your full pc. If you run this plan after each day (it could be set up to run instantly) you are able to be assured that your Pc is generally clean, often operating speedy, and always absolutely free of any Ncs error associated with your temporary files.

How Disk Cleanup can help

1. Click your ‘Start’ Button.
2. Style ‘Command’ into your search box. (no ‘enter’ yet)
3. When holding down in your ‘CTRL-SHIFT’ important go ahead and hit ‘Enter’.
4. You will see a ‘permission dialogue’ box.
5. Click ‘Yes’
6. You will see a black box open up plus a blinking cursor.
7. Variety in ‘cleanmgr’. Hit ‘Enter’.
8. Now Disk Cleanup will start calculating the amount of occupied disk space you will be able to reclaim.
9. Now a ‘Disk Cleanup dialogue box’ seems. There will be a series of checkboxes for you personally to pick. Generally it will likely be the ‘Temporary Files’ that consider up the vast majority of your disk area.
10. Verify the boxes that you want cleaned. Click ‘OK’.

How to repair

3. System Restore can also be a worthwhile device if you ever get stuck and just desire to get back to a time when your computer system was working ideal. It will work without affecting your pics, paperwork, or other crucial information. You can discover this option with your User interface.

Ncs Expert

Manufacturer

Device

Operating System


Ncs Expert Error 2041


4.5 out of
5

based on
65 ratings.

 

Попробуем закодировать наш авто.
Повторяем пункты с 1 по 4 описанные в прошлой теме. Только профиль загружаем MANUAL.
Видим вот такое окно, данные о машине и список доступных ЭБУ

1

Попробуем изменить некоторые параметры, нажимаем кнопку F4 «Выбор ЭБУ». Появится список доступных для кодирования ЭБУ

2

в этом примере будем работать с модулем света LCM, выбираем его в списке и нажимаем ОК.
видим что для кодирования выбран LCM, выполняемая функция CODIERDATEN_LESSEN(читать)

3

дальше 2 пути можно просто нажать кнопку F4 «Читать ЭБУ», либо нажать F5 «Базовые функции» и в списке выбрать coapiReadSgGetFswPsw

4

подтверждаем работу с LCM

5

в рузультате в папке C:\NCSEXPER\WORK появляется файл FSW_PSW.TRC

6

вот с ним мы и будем дальше работать. Копируем его в другую папку(необязательно, но для перестраховки лучше скопировать, чтобы было потом откуда вернуть все обратно) и открываем для редактирования. Сейчас я расскажу как отключить проверку исправности ламп. Для примера возьмем передние противотуманки.т.к. довольно часто туда ставят ксенон и БК начинает ругаться. Отключим проверку туманок. Находим в файле FSW_PSW.TRC строку KALTUEBERWACHUNG_NSW(проверка на холодную передних противотуманок) и меняем aktiv на nicht_aktiv

7

можно заодно отключить вывод сообщения о неисправности лампы туманки на приборку. Ищем строку NEBELLI_VO_PRUEF и меняем melden на nicht_melden

8

Cохраняем файл как FSW_PSW.MAN и копируем в папку C:\NCSEXPER\WORK
Возращаемся в NCS
и проверяем что JOBNAME =SG_CODIEREN, если нет, то меняем через кнопку F2 «Смена операции»

9

нажимаем кнопку F3 «Кодировать ЭБУ». Начнется процесс кодирования ЭБУ. Если все прошло успешно появится надпись «Кодирование ОК».
Все кодирование закончено.

Like this post? Please share to your friends:
  • City car driving вылетает ошибка n3d11
  • Clutch piloting problem ошибка рено премиум dxi
  • Cmos battery has failed описание ошибки
  • Clr dll ошибка windows 10
  • Clivet кондиционер коды ошибок