Cc6100 ошибка e24

Quick Links

• Page 2: Table Of Contents

  Harness Application ………………….48 4.1. List of Main Wire Harness： …………….48 4.2. List of Wire Harness for ICT Bill Acceptor： …………48 4.3. Wire Harness Pin Assignment for JPSTD interface ……….49 4.4. Wire Harness Pin Assignment for MDB interface ……….53 4.5.

• Page 3
  All materials contained are the copyrighted property of ICT. All trademarks, service marks, and trade names are proprietary to ICT. ICT reserves the right at all times to disclose or to modify any information as ICT deems necessary to satisfy any applicable law, regulation, legal process or governmental request, or to edit, refuse to post or to remove any information or materials, in whole or in part, in ICT’s sole discretion.

• Page 4: General Information

  General Information 1.1. Features Six tube cassette for maximum coin inventory. Easy to use and suitable for vending machines world wide. LCM display shows current coin changer status. Optional portable programmer to update coin changers installed on vending machines. Modular design for cheap and easy maintenance. Modular tubes for a variety of coin configuration.

• Page 5: System Specifications

  Peripherals MDB MDB Bill Acceptor (for MDB & Executive interface) MDB cashless key reader (for Executive interface only) ICT MTB (Multi Tool Box) Display Menu language: English, Русский, Deutsch, Español, Français, Português Italiano In some models interface is selected by DIP Switch or automatically.

• Page 6
  Acceptable Coin Size Coin diameter 16mm ~ 28mm Coin Thickness 1.2mm ~ 3.2mm Acceptance Speed Approx. 1 coin / second Coin payout Max. 6 coin types from a tube cassette Coin diameter and thickness for dispensing depends on tube cassette type in use TUBE Coin Diameter mm v , * v , * －…

• Page 7: Dimensions

  1.3. Dimensions Unit : mm Mounting position: Vertical, max. deviation: ± 3° Mark of conformity: CE、FCC…

• Page 8: Module Descriptions

  1.4. Module Descriptions Recognition: As shown in figure below Coin Return Lever Hook Coin Return Lever: After a coin is inserted, press the coin return button to return the coin LCM Panel: As shown in figure below 7 Panel Buttons To open the LCM panel, press the latch to open.

• Page 9
  Coin Tubes: Press the latch as shown below to remove the coin cassette…

• Page 10: Installation

  Installation Attention!! Prior installation, please remove the coin changer from the carton and inspect for damages. Attention!! Turn off VMC Power during installation – IMPORTANT!!! Warning!! Do not plug both MDB and Executive connector to VMC board simultaneously!! It may cause damage of VMC board. Device Mounting Instruction 1.

• Page 11
  Installation Checklist Check that there is a 3 to 5 mm gap between the coin changer return lever and the vending machine return mechanism. Check that when vending machine return lever has been pressed and released, the reject gate of the coin recognition module can be opened and closed properly.

• Page 12: Operation

  -Special Function 117 Error Info Display Error Message Records Set the Bill Acceptance Limitation for the 118 Bill(s) per Transaction -ICT BA only 119 CashFloat Mode Set Coin Tube Inventory Counting Mode 120 Set ID Set Customer & Machine Number Set Coin Acceptance to Cash Box 121 Coin->CashBox Setting…

• Page 13
  Code LCM Display Function Description Set LCM accessibility under door-switch 125 Accessibility options status and password security -Only MDB for TWD SGD Manual Inventory Refill Coin Inventory function by inserting Adjustment coins into tube cassette directly MYR THB CNY Setup residual credit, price adjusted by 127 Residual Credit Changer 128 Token Learning Mode…

• Page 14: Dispensing Coins To Low Level

  3.2. Dispensing Coins To Low Level Dispensing coins to low level in all coin tubes * Press the return lever together with manual button for 3 seconds. Changer will discharge coins until all tubes reach one under minimum level. (If the minimum level has not been configured by the user, the default minimum coin level would be applied.) Dispensing coins to low level in a specific tube * Press tube key once to dispense 1 coin from corresponding tube.

• Page 15: Operating Function Descriptions

  3.3. Operating Function Descriptions Code LCM Display Function Description Accessibility Coin Refill Function by Coin Insertion -Accessible without password Refill Coin under Cash Float Mode -Cash Float Mode only Default Definition Enter coin refilling mode to fill up to cash float level of each coin tube.

• Page 16
  Code LCM Display Function Description Accessibility Check the Total Coin PayIn and PayOut Total In/Out -Accessible without password Value Counter Default Definition Display current bookkeeping data. Descriptions Press the Manual button. Total In/Out Use A / C to scroll to EZ code 101. Press F to enter.
• Page 17
  Code LCM Display Function Description Accessibility -Accessible without password Language Set language Default Definition User can select menu language. -English -Русский Depends on region -Deutsch -Español Descriptions Press the Manual button. Language Use A / C to scroll to EZ code 129. Press F to enter.

• Page 18: Setting Function Descriptions

  3.4. Setting Function Descriptions Code LCM Display Function Description Accessibility Clear the Total Coin PayIn and PayOut Reset Records Value Record Default Definition Reset bookkeeping data. Descriptions Press the Manual button. Reset Records Use A / C to scroll to EZ code 102. Press F to enter.

• Page 19
  Code LCM Display Function Description Accessibility Set Accept or Reject to Coin Accept/Reject Coin Switch Denominations Default Definition All Accept Setup changer to accept or reject to each denomination. Descriptions Press the Manual button. Accept/Reject Use A / C to scroll to EZ code 103. Coin Switch 103 Press F to enter.
• Page 20
  Code LCM Display Function Description Accessibility Set Cash Float Configuration for Various Configure Cash Float -Cash Float Mode only Coin Denominations Default Definition Configure cash float level quantity of each coin value. Coin Changer can save up to 3 types of cash float setting. A coin value’s maximum level Depends on region depends on the maximum level of tube multiple tube number.
• Page 21
  Code LCM Display Function Description Accessibility Set Cash Float Type for Various Coin Activate Cash Float -Cash Float Mode only Denominations Default Definition Configure Type of cash float for various coin denominations to be activated. Descriptions Press the Manual button. Activate Use A / C to scroll to EZ code 108.
• Page 22
  Code LCM Display Function Description Accessibility Change Mgmt. Set the Change Return Mode Default Definition Setup change return by the original coin value or by the highest coin value. Org. Coin Value: return by original inserted sequence. Highest Value: return starting from highest coin value. When changer cannot Highest Value return by highest value, it returns by original coin value.
• Page 23
  Default Definition Select type of connected bill acceptor. (Only work on ICT Bill Acceptor connect to Coin Changer) Note! This is a special function. The Coin Changer must lap joint with the ICT Bill Acceptor for this function to work.
• Page 24
  Code LCM Display Function Description Accessibility Cassette Type Coin Tube Configuration Mode -Special Function Default Definition Configure the tube coin assignment without change the firmware. Descriptions Press the Manual button. Cassette Type Use A / C to scroll to EZ code 116. Press F to enter.
• Page 25
  ICT Bill Acceptor connect directly to the Coin Changer) Configurable number of bill: 1 to 9 Note! This is a special function. The Coin Changer must be equipped with the ICT Bill Acceptor for this function to work. Descriptions Press the Manual button.
• Page 26
  Code LCM Display Function Description Accessibility CashFloat Mode Set Coin Tube Inventory Counting Mode Default Definition Select counting method of coin tube inventory. Cashfloat Mode: Changer system keeps counting coin number among tubes. Even after reboot or power reset, coin inventory data remains in memory.
• Page 27
  Code LCM Display Function Description Accessibility Set ID Set Customer & Machine Number Default Definition Configure Customer & Machine Number of Coin Changer Configurable Range: Customer Number contains 16 digits and each digit applies to 0 — 9. Machine Number contains 12 digits and each digit applies to 0 — 9 or A – Z. Descriptions Press the Manual button.
• Page 28
  Code LCM Display Function Description Accessibility Set Coin Acceptance to Cash Box Coin->CashBox Setting Condition Default Definition Setup conditions of coin acceptance to cash box. Same Coin Value: After a coin accepted, check the accepted denomination total in changer. When changer can return the same denomination coins in the changer, the coin falls into cash box, otherwise it is rejected.
• Page 29
  Code LCM Display Function Description Accessibility Sensor Inventory -Only MDB for TWD SGD Detect Tube Inventory MYR THB CNY Adjustment Default Definition Detect tube inventory and overwrite tube count data. Descriptions Press the Manual button. Sensor Inventory Use A / C to scroll to EZ code 123. Adjustment Press F to enter.
• Page 30
  Code LCM Display Function Description Accessibility Set LCM accessibility under door-switch Accessibility options status and password security Default Definition Setup LCM accessibility under door-switch status and setup password security. Door-ON Door-ON: LCM inaccessible under door closing Door-OFF: LCM accessible under door closing PW-ON PW-ON: Require password to access all LCM function PW-OFF: Require no password to access all LCM function…
• Page 31
  Code LCM Display Function Description Accessibility Manual Inventory Refill Coin Inventory by inserting coins -Only MDB for TWD SGD MYR THB CNY Adjustment into tube cassette directly Default Definition Allow user to refill coins by inserting coins into tube cassette directly. The tube refill procedure is select code 126, check refill amount on display, take out cassette, refill coins into cassette, put cassette back then push Enter to finish refill procedure.
• Page 32
  Code LCM Display Function Description Accessibility Residual Credit Setup residual credit Default Definition When the Coin Changer cannot return the coins completely, leave the surplus credit in VMC or delete it. User allow to setup residual credit, vending sales Delete adjusted by Changer.
• Page 33
  Code LCM Display Function Description Accessibility -CC6100M CC6100E Token Learning Mode Token learning mode Default Definition User can teach Changer 2 kinds of token through LCM. (Token A or B) Each token requires at least 3 for learning. Descriptions Press the Manual button. Token Learning Use A / C to scroll to EZ code 128.
• Page 34
  Code LCM Display Function Description Accessibility -CC6100M CC6100E Reject Lever Setting Set no refund after inserting payment Default Definition User can set vending machine to no refund after inserting payment. ON: set vending machine to refund by pressing reject button I NR only （…
• Page 35
  Code LCM Display Function Description Accessibility Set limitation of inserted coins in single -CC6100M KRW only Maximum for Insert Q’TY transaction Default Definition Use can define a limitation number of coins during a single vend. When inserted coins exceed the number of limitation, the exceeded coins will be returned.
• Page 36
  Code LCM Display Function Description Accessibility -CC6100M CC6100E Decimal and Scaling Set Decimal point and Scaling Factor Default Definition Setup the decimal point and scaling factor of vending values to VMC. Decimal 0 To prevent the counting value error, please make sure the value can be Scaling 1 divided to integer under the decimal and scaling setting.
• Page 37
  Code LCM Display Function Description Accessibility Currency Code Setting Currency Code Default Definition Base on MDB protocol Currency code Base on MDB protocol Descriptions Press the Manual button. Currency Code Use A / C to scroll to EZ code 134. Press F to enter.
• Page 38
  Code LCM Display Function Description Accessibility Setting Payout Method Level 2 Payout Method ） Default Definition Set CC6100 payout method when it receives a level 2 DISPENSE command. Combination W hen the coin value which VMC assign to payout is empty, ：…

• Page 39: Executive Setting Function Descriptions

  3.5. Executive Setting Function Descriptions Code LCM Display Function Description Accessibility Executive only Sell Mode Set Single Vend or Multi Vend Descriptions Setup condition of vending criteria to single vending mode or multi vending mode. Single Vend: After a transaction is made, vending machine returns changes Single Vend and closes the transaction.

• Page 40
  Code LCM Display Function Description Accessibility Executive only Product Price Set Product Price Holding by Changer Default Definition Setup product price. The price is applied only when it is hold by changer. To set price holding mode, please refer to code 203. Descriptions Press the Manual button.
• Page 41
  Code LCM Display Function Description Accessibility Executive only Price Holding Set Price Holding by Changer or VMC Default Definition Setup whether the product price is hold by Changer or VMC. Descriptions Press the Manual button. Price Holding Use A / C to scroll to EZ code 203. Press F to enter.
• Page 42
  Code LCM Display Function Description Accessibility Executive only Enable Bill Acceptor Set BA enable with or without e-key Default Definition Setup Bill Acceptor enable with or without e-key connection. Always Always: BA always enable, requires no e-key connection. If card present: BA only enable under e-key connection. Descriptions Press the Manual button.
• Page 43
  Code LCM Display Function Description Accessibility Executive only Residual Credit Setup residual credit Default Definition When the Coin Changer cannot return the coins completely, leave the surplus Not Delete credit in VMC or delete it. Descriptions Press the Manual button. Residual Credit Use A / C to scroll to EZ code 207.
• Page 44
  Code LCM Display Function Description Accessibility Executive only Credit Limit For Cashless Set Credit limit for cashless Default Definition When the top-up credit of cashless device (E-key) exceeds the credit limit, the Coin Changer & Bill Accepter will be disabled. And the LCM of Coin Changer will show “Cashless Limit Reached!”.
• Page 45
  Code LCM Display Function Description Accessibility Executive only Bill(s) per Transaction Set BA limitation per transaction Default Definition The maximum Qty of bills for Bill Accepter per transaction: When 1) Coin Changer is able to return the bill value and 2) the bill Qty is less than the maximum Qty of bills for Bill Accepter, the Bill Accepter will stack the bill into the cash box while the bill has been inserted, otherwise the bill will hold in escrow.
• Page 46
  Code LCM Display Function Description Accessibility Executive only Exact Change Notice Set exact change notice on display Default Definition When the Coin Changer may not return the coins completely, choose to display exact change notice on VMC or not. Active: Display depends on reserve coin setting (124). When reserve coin Not Active sets to ON, the smallest three denominations amounts under 10 coins, display shows “No Change.”…

• Page 47: Dip Switch Setting

  3.6. DIP Switch Setting FUNCTION SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8 High anti-counterfeiting (1st coin value) High acceptance (1st coin value) High anti-counterfeiting (2nd coin value) High acceptance (2nd coin value) High anti-counterfeiting (3rd coin value) High acceptance (3rd coin value) High anti-counterfeiting (4th coin value) High acceptance (4th coin value) Reserved (MDB)

• Page 48: Harness Application

  Download Box Cable (Optional) WEL-RCC42 Warning!! Do not plug both MDB and Executive connecter to VMC board simultaneously!! It may cause damage of VMC board. 4.2. List of Wire Harness for ICT Bill Acceptor ： Interface ICT Bill Acceptor Harness…

• Page 49: Wire Harness Pin Assignment For Jpstd Interface

  4.3. Wire Harness Pin Assignment for JPSTD interface « » Main wire harness…

• Page 51
  « » JPSTD wire harness for ICT Bill Acceptor…

• Page 53: Wire Harness Pin Assignment For Mdb Interface

  4.4. Wire Harness Pin Assignment for MDB interface « » Main wire harness…

• Page 55
  « » MDB wire harness for ICT Bill Acceptor…

• Page 57: Wire Harness Pin Assignment For Executive & Mdb Interface

  4.5. Wire Harness Pin Assignment for Executive & MDB Interface Interface Used Voltage Harness Executive 24V AC WEL-RCC54 Interface Peripheral Harness Executive MDB Peripheral WEL-RCC72 (MDB Peripheral) WEL-RCC54…

• Page 58
  Interface Used Voltage Harness 10 – 45V DC WEL-RCC72 (MDB) Interface Peripheral Harness MDB Peripheral WEL-RCC72 (MDB Peripheral) Warning!! Do not plug both MDB and Executive connector to VMC board simultaneously!! It may cause damage of VMC board.

• Page 59: Wire Harness Pin Assignment For Download Box

  4.6. Wire Harness Pin Assignment for Download Box…

• Page 60: I/O Circuit

  I/O Circuit « » JPSTD Interface…

• Page 61
  « » MDB Interface…
• Page 62
  «Executive » Interface…

• Page 63: Maintenance

  Maintenance To ensure the coin changer operate correctly, following maintenance steps are required. ICT suggests cleaning every six month; however, under heavy usage conditions or locations the maintenance may need to be more frequent. Warning: Before removing the coin changer, please make sure to turn the…

• Page 65: Troubleshooting

  Troubleshooting 7.1. Error Code Messages Code Cause E10 LCM Panel Open 5 red + 2 red E11 Checksum Error Red Light E12 Signal from the coin base was not received when the power was turned on. Red Light Two seconds after activation, the SYSTEM did not wait for the READY signal from the DEVICE and jumped to the exception.

• Page 66: Error Handling

  ICT personnel for support. « » Checksum Error Code: E11 LED Light Display: Red light LCM Display: As shown in figure below Check Sum Error Cause: Check Sum Error. Corrective Measure: Notify the ICT personnel for support.

• Page 67
  « » Payout Mode Error Code: E12 LED Light Indicator: Red light LCM Display: As shown in figure below Payout Module Error Cause: Signal from payout module was not received when power was turned on. Corrective Method: Ensure that the signal wire is connected to the payout module.
• Page 68
  Code: E14 LED Light Display: 3 red+ 1 red LCM Display: As shown in figure below Coil Error #1 Cause: Coil 1 is damaged. Corrective Measure: Notify the ICT personnel « » #2 Coil Error Code: E15 LED Light Display: 3 red + 2 red…
• Page 69
  « » Sort Sensor Error Code: E18 LED Light Display: 3 red + 4 red LCM Display: As shown in figure below Sorting Module Sensor Error Cause: Coin separator sensor problem. Corrective Measure: 1. Make sure that the reflective prism is not dirty or blocked by foreign objects. If it is, remove the foreign object and clean the reflective prism.
• Page 70
  1. Close the deck and reactive the power. 2. Retry once a minute for 10 times, if the problem is not resolved then remove the LCM panel to leave this exception and notify ICT personnel for support. « » Motor Error：A&B…
• Page 71
  « » Motor Error：A Code: E21 LED Light Display: None LCM Display: As shown in figure below Left Coin Jam Cause: The first motor group cannot be positioned. The first motor group might be damaged, coin or foreign objects might have caused the motor to stuck, coins are stuck in the coin tube, or the semicircle disk has derailed.
• Page 72
  If nothing happens, then the first motor group has been damaged. Please notify the ICT personnel to handle the problem. 4. Verify whether the openings of the A and B tube has been stuck by a coin. If a tube has been stuck, remove the stuck coin, reassemble the coin tube, and turn on the power again.
• Page 73
  2. Turn on the power again to observe whether the disk has repositioned itself. If it does not, then the second motor group is damaged. Please notify the ICT personnel for support. 3. Confirm whether the coin rod is stuck. If it is then manually move the rod back to its position.
• Page 74
  « » Cassette Out Code: E23 LED Light Display: 5 red LCM Display: As shown in figure Inhibit Cassette Out E23 Cause: Parts malfunction or coin tubes have been incorrectly positioned. Corrective Measure: Ensure that the coin tubes are correctly positioned…
• Page 75
  « » Tube H/L Sensor Error Code: E24 LED Light Display: 6 red+ 4 red LCM Display: As shown in figure Coin->Tube Sensor Error Cause: Coins got stuck at the coin separation area or the coin tube opening twice in a row, causing the HI Level Sensor to fail to detect the coin twice in a row.
• Page 76
  « » Tube H/L Sensor Error：A Code: E25 LED Light Display: None LCM Display: As shown in figure below Tube A Sensor Error Cause: Low Level = empty, Hi Level = full. Coin might be sorted to wrong tube. Corrective Measure: Changer retries every 2 seconds during the standby mode. Remove the stuck coin then restart changer to solve the problem.
• Page 77
  « » Tube H/L Sensor Error：D Code: E28 LED Light Display: None LCM Display: As shown in figure below Tube D Sensor Error Cause: Low Level = empty, Hi Level = full. Coin might be sorted to wrong tube. Corrective Measure: Changer retries every 2 seconds during the standby mode. Remove the stuck coin then restart changer to solve the problem.
• Page 78
  Corrective Measure: Open the deck. Ensure that the Sensor and LED are not dirty or blocked by foreign objects. If they are, then clean the Sensor and LED or remove the obstruction. If the problem cannot be solved, notify ICT personnel for support.
• Page 79
  Code: E33 LED Light Display: None LCM Display: As shown in figure below. Recosnition Ver Error Cause: Recosnition Module Damage Corrective Measure: Notify the ICT personnel « » Inhibit By VMC Code: None LED Light Display: 2 red LCM Display: As shown in figure below Inhibit by Cause: The “Inhibit”…

• Page 80: Firmware Download And Upgrade Instruction

  Statement: This document is established and written purely for the convenience of the customers. The document does not clearly specify the legal responsibilities assumed by the International Currency Technologies (ICT) Corp. The ICT Corp. reserves all rights to the original records of legal writings and intellectual properties, including subsequent modifications of the figures and updates of the texts.

• Page 81
  8.1.3. Start Download Process: 1. Please ensure that the RS232 connection from PC to FP-004 works properly; if not, check whether RS-232 program and driver has been activated. 2. Click and execute FP4DT.exe Figure.64 3. Select Coin Changer, STM8, type of FP004 download box, RS232 COM port, and specify the path for file download (only accept files with .s19 extensions).
• Page 82
  6. Select the download option then the process would execute automatically (The left-bottom corner of the screen shows the communication status) Figure.68 7. Download Completed, all procedures reach 100%. Figure.69…

• Page 83: Mcu Stm32 Firmware Download By Irda Special Function

  8.2. MCU STM32 Firmware Download by IrDA Special Function 8.2.1. Tools Please prepare related accessories ready 1. PDA supports IrDA download 8.2.2. Connection Please keep distance between changer and PDA within 5 cm, angle deviation less than 5 degree. 5 cm 8.2.3.

• Page 84: Pc Tool Instruction

  PC Tool Instruction To setup Changer through PC Tool, please prepare tools and connection as following chapter instruction: Chapter 8-1-1. Tools Chapter 8-1-2. Connection This document provides detailed PC setup steps as follows: 9.1. Cashfloat Setting 9.1.1. Set Changer to Initial Setting 1.

• Page 85
  9.1.2. Set Changer to Customization Setting 1. Open PC Tool. Select “Cashfloat Setting” function item. 2. Select Changer Type. 3. Select tube setting from the list then PC tool will display the setting. 4. Modify the settings to customization configuration. The setting items may vary depends on different region.
• Page 86
  9.1.3. Set Coin Channels Executive only 1. Open PC Tool. Select “Cashfloat Setting” function item. 2. Select Changer Type. Channel setting function only applies to 6100E type. 3. Select tube setting from the list then PC tool will display the setting. Click “Read Setting From CC”…
• Page 87
  9.1.4. Setup File Management Import Setting File 1. Click “Import Setting File” to load setup file, a file selection window shows up. 2. Choose setup file in .ini format and click open to load. 3. PC Tool displays setting of the imported file. User can then click “Set Coin Changer”…
• Page 88
  Save Setting File 1. Choose setting options to customized configuration for saving. 2. Click “Save Setting File” to save a setup file, a file saving window shows up. 3. Choose file path and input file name, and then click save to complete saving. Setup file will be saved as an .ini file.

• Page 89: Serial Number Setting

  9.2. Serial Number Setting 9.2.1. Set Serial Number 1. Open PC Tool. Select “Serial Number” function item. 2. To set serial number, Input serial number in blocks. The serial number in blocks will be setting into changer. Then click “Write” button to set serial number to changer. “Setting Finish!”…

• Page 90: Read Audit Data

  Read Audit Data This document provides detailed audit data read out steps as following methods: Read audit data by ICT MTB Read audit data by IrDA 10.1. Read Audit Data by ICT MTB 10.1.1. Tools Please prepare download box and related wire accessories ready 1.

• Page 91: Read Audit Data By Irda

  10.2. Read Audit Data by IrDA To read audit data by IrDA, please prepare tools and connection as following chapter instruction: Chapter 8-2-1. Tools Chapter 8-2-2. Connection 1. Prepare connection above and set changer in standby status for data read out. 2.

• Page 92: Module Assembling Procedure

  Module Assembling Procedure 11.1. Upper Module Disassembling: 1. Press down the shell stabilization leaver until the fixed axis is fully exposed. 2. Pull and rotate the upper half of the module forward. 3. After the upper half of the module is pulled out, unplug the soft gray cable, and then lift upward at a 35 degree angle until the…

• Page 93: Recognition Module Disassembling

  11.2. Recognition Module Disassembling: 1. Turn the upper half of the module towards the back and ensure that the two fix points of the modules are flipped to the two sides. 2. Pull out the recognition module. 3. Unplug the wire connecting to the identification module.

• Page 94: Coin Discharge Module Disassembling

  11.3. Coin Discharge Module Disassembling: 1. Remove the two screws on the sides of the coin discharge module. 2. Rotate the coin discharge module downward 90 degrees. 3. Unplug the wire connecting to the coin discharge module. 4. Pull and remove the coin discharge module.

• Page 95: Module Exploded Views

  Module Exploded Views（CC6100-TWD） Appellation Quantity Note Order Part Number Coin Change Main Machine Module 3RCC-CAS05001 3RCC-POK19000 Coin Changer-Coin Discharge Module Changer Coin Discharge Motor Module 3RCC-MOT02001 Recognition Module (2.5mm) 3RCC-IDE11002 Coin Separation Module (ESCROW-A) 3RCC-SOR11006 Coin Tube Module (TWD Version-2) 3RCC-TUB25004 LCM Display Panel Module 3RCC-FAC01002…

• Page 96
  Taiwan International Currency Technologies Corporation No. 28, Lane 15, Sec. 6, Minquan E. Rd., Neihu Dist., Taipei City 114, Taiwan R.O.C. ） Tel: 886-2-2793-1236 Fax: 886-2-2793-6125 sales@ictgroup.com.tw (For Sales) rma@ictgroup.com.tw (For Customer Service) Website: www.ictgroup.com.tw…
• Page 97
  www.ictgroup.com.tw 2017 International Currency Technologies Corporation © V. 1.9 Part Number: Beta 2017/08/24…

CC6100E

CC6100 Series

The CC6100 Series features six modular coin tubes to provide the highest level of flexibility in managing payout combinations. With MDB, JPSTD and Executive/MDB interfaces available, the CC6100 Series supports multiple and outdoor applications.

• High performance coin management system
• Easily configurable payout system with modular tube design
• Advanced anti-counterfeiting technology
• Six circulating coin tubes for a higher coin capacity and lower restocking frequency
• Power saving function (CC6100SA)
• IrDA firmware upgrade available (CC6100SA/CC6100E)
• Support EVA-DTS auditing format (CC6100SA/CC6100E)

Download