You should upgrade or use an alternative browser.
-
#1
I am building my first computer. On the Dr Debug, I am getting code 00, and it doesn’t change after I boot up. I haven’t received my monitor yet, so I don’t know whether or not it is actually not booting up. Is there an issue with my motherboard?
Specs:
Motherboard: ASROCK 970 EXTREME 4 AM3 ATX
CPU: AMD BOX AMD FX-8350 BLACK ED
RAM: G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1866 (PC3 14900) Desktop Memory Model F3-14900CL9D-8GBXL
GPU: SAPPHIRE 100355-1GOCL Radeon HD 7850 1GB 256-bit GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support Video Card OC Version
PSU: CORSAIR TX Series CMPSU-650TX 650W ATX12V / EPS12V
Cooler: COOLER MASTER Hyper 212 EVO RR-212E-20PK-R2
-
- Nov 1, 2012
-
- 39,825
-
- 249
-
- 126,990
-
#2
Check for a sticker on the motherboard with the board’s BIOS version.
-
#3
Check for a sticker on the motherboard with the board’s BIOS version.[/quotemsg]
It says P2.30-15B
-
- Nov 1, 2012
-
- 39,825
-
- 249
-
- 126,990
-
#4
-
#5
Yes, the cooler fan, and all case fans are spinning. Lights come on as well. GPU fan also comes on.
-
- Nov 1, 2012
-
- 39,825
-
- 249
-
- 126,990
-
#6
I would test the board outside the case (for ruling out a short). Is there a backplate installed for the CPU cooler?
-
#7
I would test the board outside the case (for ruling out a short). Is there a backplate installed for the CPU cooler?[/quotemsg]
Yes, I installed the backplate. I will test it outside of the case tomorrow, as I have work in the morning. What should be connected to the motherboard when I test it outside of the box?
-
- Nov 1, 2012
-
- 39,825
-
- 249
-
- 126,990
-
#8
Did the CPU come with stock cooler?
For testing you can start it with only CPU and CPU fan. See if still 00 code.
Then add only one RAM stick, graphics card, DVD drive, keyboard and mouse.
-
#9
-
- Nov 1, 2012
-
- 39,825
-
- 249
-
- 126,990
-
#10
However, I thought that the CPU fan would not spin when the EATX 12V cable is unplugged.
Similar threads
- Advertising
- Cookies Policies
- Privacy
- Term & Conditions
Кратко перечислю и опишу некоторые коды:
00
(Необходимо проверить правильно ли установлен процессор и сбросить CMOS)
0d
(Проблема связана с памятью, видеокартой или другими устройствами. Необходимо сбросить CMOS, вытащить, вставить оперативную память и видеокарту, а также извлечь другие USB и PCI устройства)
01 – 54 (кроме 0d), 5A — 60
(Проблема связана с памятью. Необходимо переустановить процессор и оперативную память, потом сбросить CMOS. Если проблема останется, необходимо установить только один модуль памяти или использовать другой модуль памяти)
55
(Оперативная память не обнаружена. Необходимо переустановить процессор и оперативную память. Если проблема останется, необходимо установить только один модуль памяти или использовать другой модуль памяти)
61 — 91
(Ошибка инициализации чипсета. Необходимо сбросить или очистить CMOS)
92 — 99
(Проблема относится к PCI-E устройствам. Необходимо заново установить PCI-E устройство или установить в другой слот. Если проблема не исчезнет, то необходимо извлечь все PCI-E устройства или использовать другой видеоадаптер)
A0 — A7
(Проблема связана с IDE или SATA устройствами. Необходимо переподключить IDE и SATA устройства. Если проблема останется, необходимо очистить CMOS и попробовать отключить все SATA устройства)
b0
(Проблема связана с оперативной памятью. Необходимо переустановить процессор и оперативную память. Если проблема останется, необходимо установить только один модуль памяти или использовать другой модуль памяти. * Для моделей X79, необходимо установить память в слоты DDR3 A1, B1, C1 и D1)
b4
(Проблема связана с USB устройствами. Необходимо отключить все USB устройства)
b7
(Проблема связана с памятью. Необходимо переустановить процессор и оперативную память, потом сбросить CMOS. Если проблема останется, необходимо установить только один модуль памяти или использовать другой модуль памяти)
d6
(Видеокарта не принята. Необходимо очистить CMOS и наново установить видеокарту. Если проблема останется, необходимо установить видеокарту в другой слот или использовать другую видеокарту)
d7
(Клавиатура и мышь не обнаружена. Необходимо переподключить клавиатуру и мышь)
d8
(Неверный пароль)
FF
(Необходимо проверить правильно ли установлен процессор и сбросить CMOS)
Смотрите также мою статью:
Описание звуковых сигналов BIOS
You should upgrade or use an alternative browser.
-
#1
-
R
ryttare99
Everything is the same so i have returned it to the store and i hope i will get a new one.
but thanks for the help.
-
- Nov 1, 2012
-
- 39,825
-
- 249
-
- 126,990
-
#2
-
#3
-
- Nov 1, 2012
-
- 39,825
-
- 249
-
- 126,990
-
#4
-
#5
Me and my friend did change the cpu and cooler but still 00.
can it be something wrong with the motherboard?
-
- Nov 1, 2012
-
- 39,825
-
- 249
-
- 126,990
-
#6
-
#7
-
- Nov 1, 2012
-
- 39,825
-
- 249
-
- 126,990
-
#8
-
#9
-
- Nov 1, 2012
-
- 39,825
-
- 249
-
- 126,990
-
#10
-
#11
Ok so i put it on a cordboard and start it up.
-
- Nov 1, 2012
-
- 39,825
-
- 249
-
- 126,990
-
#12
-
#13
-
- Nov 1, 2012
-
- 39,825
-
- 249
-
- 126,990
-
#15
-
#16
-
- Nov 1, 2012
-
- 39,825
-
- 249
-
- 126,990
-
#17
-
#18
Everything is the same so i have returned it to the store and i hope i will get a new one.
but thanks for the help.
-
- Nov 1, 2012
-
- 39,825
-
- 249
-
- 126,990
Similar threads
- Advertising
- Cookies Policies
- Privacy
- Term & Conditions
Go to helpmebuildapc
r/helpmebuildapc
Created to deliver *live* help to people building PC’s that need a quick, accurate advice specific to them on a case-by-case basis.
Members
Online
•
Asrock 970 extreme4 error 00
First build ever. My mobo has Dr. Debug and keeps throwing error 00 («not used» according to the manual) and I’m not getting an image (gpu Radeon HD 5450). My case does not have a speaker so I’m not sure it’s even posting. I’ve checked the psu using the paper clip method and it seems fine.
Кратко перечислю и опишу некоторые коды:
00
(Необходимо проверить правильно ли установлен процессор и сбросить CMOS)
0d
(Проблема связана с памятью, видеокартой или другими устройствами. Необходимо сбросить CMOS, вытащить, вставить оперативную память и видеокарту, а также извлечь другие USB и PCI устройства)
01 – 54 (кроме 0d), 5A — 60
(Проблема связана с памятью. Необходимо переустановить процессор и оперативную память, потом сбросить CMOS. Если проблема останется, необходимо установить только один модуль памяти или использовать другой модуль памяти)
55
(Оперативная память не обнаружена. Необходимо переустановить процессор и оперативную память. Если проблема останется, необходимо установить только один модуль памяти или использовать другой модуль памяти)
61 — 91
(Ошибка инициализации чипсета. Необходимо сбросить или очистить CMOS)
92 — 99
(Проблема относится к PCI-E устройствам. Необходимо заново установить PCI-E устройство или установить в другой слот. Если проблема не исчезнет, то необходимо извлечь все PCI-E устройства или использовать другой видеоадаптер)
A0 — A7
(Проблема связана с IDE или SATA устройствами. Необходимо переподключить IDE и SATA устройства. Если проблема останется, необходимо очистить CMOS и попробовать отключить все SATA устройства)
b0
(Проблема связана с оперативной памятью. Необходимо переустановить процессор и оперативную память. Если проблема останется, необходимо установить только один модуль памяти или использовать другой модуль памяти. * Для моделей X79, необходимо установить память в слоты DDR3 A1, B1, C1 и D1)
b4
(Проблема связана с USB устройствами. Необходимо отключить все USB устройства)
b7
(Проблема связана с памятью. Необходимо переустановить процессор и оперативную память, потом сбросить CMOS. Если проблема останется, необходимо установить только один модуль памяти или использовать другой модуль памяти)
d6
(Видеокарта не принята. Необходимо очистить CMOS и наново установить видеокарту. Если проблема останется, необходимо установить видеокарту в другой слот или использовать другую видеокарту)
d7
(Клавиатура и мышь не обнаружена. Необходимо переподключить клавиатуру и мышь)
d8
(Неверный пароль)
FF
(Необходимо проверить правильно ли установлен процессор и сбросить CMOS)
Смотрите также мою статью:
Описание звуковых сигналов BIOS
- Aug 25, 2014
- 44
- 0
- 18,530
- 0
-
#1
Hi all,
PC specs:
- Intel i5-4690K
- ASRock Z97 EXTREME4 ATX LGA1150 Mobo
- MSI GeForce GTX 970 4GB
- G.skills X Series 8GB RAM (2 x 4GB) DDR3-1866
- Samsung 840 EVO SSD
- Seagate Barracuda HDD
After transporting and doing maintenance on my rig it seems to be throwing an A2 error. All I did was clean the insides of dust, added a OCZ Z-Drive R4 SSD and changed the CMOS battery (cleared CMOS) after experiencing date and time loss if PC unplugged.
Actions I have taken:
- Made sure all connectors inside the case were firmly seated (especially the PSU plugs. To make sure I didn’t knocked anything lose while cleaning).
- Removed Z-Drive SSD.
- Removed all storage devices but boot device.
- Removed GPU.
- Removed 3 of 4 sticks of RAM.
- Unplugged all peripheral devices.
Error codes I have seen: A2/D7 /64. After seeing an A2 error code. I proceeded to unplug the mouse and keyboard and restarted the PC. I saw a D7 code so plugged in the keyboard. After doing so, the 64 code appeared.
Please could someone help me out because I have exhausted my knowledge on this one.
Cheers
- Nov 6, 2019
- 5,773
- 1,238
- 23,390
- 1,006
-
#2
Welcome back to the forum. It’s been 6 years since your last post 
You transported your system. That code is a motherboard code for the CPU.
If I were you I would unplug everything. Even the boot drive. Leave 1 stick of RAM and plug your monitor on your motherboard graphics port and remove the GPU. Leave your system barebone with only the stuff you need plugged in.
If that doesn’t work I would check the CPU for bent pins. Transporting a PC can be hard on the CPU heatsink and you never know. Could bend pin.
- Nov 6, 2019
- 5,773
- 1,238
- 23,390
- 1,006
-
#2
Welcome back to the forum. It’s been 6 years since your last post
You transported your system. That code is a motherboard code for the CPU.
If I were you I would unplug everything. Even the boot drive. Leave 1 stick of RAM and plug your monitor on your motherboard graphics port and remove the GPU. Leave your system barebone with only the stuff you need plugged in.
If that doesn’t work I would check the CPU for bent pins. Transporting a PC can be hard on the CPU heatsink and you never know. Could bend pin.
- Aug 25, 2014
- 44
- 0
- 18,530
- 0
-
#3
I took everything out but one stick of RAM. I wobbled the CPU heat sink around and it seems to be working.
I have a feeling that the issue was with replacing the CMOS battery. Leaving the PC overnight unplugged must’ve let the system fully reset.
Thanks buddy
| Thread starter | Similar threads | Forum | Replies | Date |
|---|---|---|---|---|
|
G |
Question Burnt EPS receptacle on Asrock X299 ITX | Motherboards | 6 | Yesterday at 10:13 AM |
|
R |
Question Motherboard NVME M2 Drive Detection Issues after new GPU Install | Motherboards | 13 | Friday at 10:28 PM |
|
|
[SOLVED] ASRock B450M Pro4 ReBar | Motherboards | 3 | Feb 1, 2023 |
|
|
Question motherboard help | Motherboards | 1 | Feb 1, 2023 |
|
S |
Question ASRock B550M/ac giving me a bad day | Motherboards | 1 | Jan 30, 2023 |
|
S |
Question AsRock b450 steel legen no post, no beep, no display, after working properly | Motherboards | 7 | Jan 28, 2023 |
|
M |
Question Which one of these 4 MoBos are better for my specific demands? | Motherboards | 4 | Jan 24, 2023 |
|
|
Question ASRock Z97 Extreme4 M.2 NVMe SSD Detection | Motherboards | 2 | Jan 12, 2023 |
|
F |
Question ASRock z390 extreme4 no longer sees m.2 drive | Motherboards | 1 | Sep 6, 2022 |
|
|
Question ASRock Z77 Extreme4 Motherboard shows zero signs of life — no power, no fans, no lights, not posting | Motherboards | 6 | Jul 15, 2022 |
- Advertising
- Cookies Policies
- Privacy
- Term & Conditions
- Topics
- Aug 25, 2014
- 44
- 0
- 18,530
- 0
-
#1
Hi all,
PC specs:
- Intel i5-4690K
- ASRock Z97 EXTREME4 ATX LGA1150 Mobo
- MSI GeForce GTX 970 4GB
- G.skills X Series 8GB RAM (2 x 4GB) DDR3-1866
- Samsung 840 EVO SSD
- Seagate Barracuda HDD
After transporting and doing maintenance on my rig it seems to be throwing an A2 error. All I did was clean the insides of dust, added a OCZ Z-Drive R4 SSD and changed the CMOS battery (cleared CMOS) after experiencing date and time loss if PC unplugged.
Actions I have taken:
- Made sure all connectors inside the case were firmly seated (especially the PSU plugs. To make sure I didn’t knocked anything lose while cleaning).
- Removed Z-Drive SSD.
- Removed all storage devices but boot device.
- Removed GPU.
- Removed 3 of 4 sticks of RAM.
- Unplugged all peripheral devices.
Error codes I have seen: A2/D7 /64. After seeing an A2 error code. I proceeded to unplug the mouse and keyboard and restarted the PC. I saw a D7 code so plugged in the keyboard. After doing so, the 64 code appeared.
Please could someone help me out because I have exhausted my knowledge on this one.
Cheers
- Nov 6, 2019
- 5,773
- 1,238
- 23,390
- 1,006
-
#2
Welcome back to the forum. It’s been 6 years since your last post
You transported your system. That code is a motherboard code for the CPU.
If I were you I would unplug everything. Even the boot drive. Leave 1 stick of RAM and plug your monitor on your motherboard graphics port and remove the GPU. Leave your system barebone with only the stuff you need plugged in.
If that doesn’t work I would check the CPU for bent pins. Transporting a PC can be hard on the CPU heatsink and you never know. Could bend pin.
- Nov 6, 2019
- 5,773
- 1,238
- 23,390
- 1,006
-
#2
Welcome back to the forum. It’s been 6 years since your last post
You transported your system. That code is a motherboard code for the CPU.
If I were you I would unplug everything. Even the boot drive. Leave 1 stick of RAM and plug your monitor on your motherboard graphics port and remove the GPU. Leave your system barebone with only the stuff you need plugged in.
If that doesn’t work I would check the CPU for bent pins. Transporting a PC can be hard on the CPU heatsink and you never know. Could bend pin.
- Aug 25, 2014
- 44
- 0
- 18,530
- 0
-
#3
I took everything out but one stick of RAM. I wobbled the CPU heat sink around and it seems to be working.
I have a feeling that the issue was with replacing the CMOS battery. Leaving the PC overnight unplugged must’ve let the system fully reset.
Thanks buddy
| Thread starter | Similar threads | Forum | Replies | Date |
|---|---|---|---|---|
|
G |
Question Burnt EPS receptacle on Asrock X299 ITX | Motherboards | 6 | Yesterday at 10:13 AM |
|
R |
Question Motherboard NVME M2 Drive Detection Issues after new GPU Install | Motherboards | 13 | Friday at 10:28 PM |
|
|
[SOLVED] ASRock B450M Pro4 ReBar | Motherboards | 3 | Feb 1, 2023 |
|
|
Question motherboard help | Motherboards | 1 | Feb 1, 2023 |
|
S |
Question ASRock B550M/ac giving me a bad day | Motherboards | 1 | Jan 30, 2023 |
|
S |
Question AsRock b450 steel legen no post, no beep, no display, after working properly | Motherboards | 7 | Jan 28, 2023 |
|
M |
Question Which one of these 4 MoBos are better for my specific demands? | Motherboards | 4 | Jan 24, 2023 |
|
|
Question ASRock Z97 Extreme4 M.2 NVMe SSD Detection | Motherboards | 2 | Jan 12, 2023 |
|
F |
Question ASRock z390 extreme4 no longer sees m.2 drive | Motherboards | 1 | Sep 6, 2022 |
|
|
Question ASRock Z77 Extreme4 Motherboard shows zero signs of life — no power, no fans, no lights, not posting | Motherboards | 6 | Jul 15, 2022 |
- Advertising
- Cookies Policies
- Privacy
- Term & Conditions
- Topics
2.11 Режим отладки
На материнской плате расположен светодиод для отладки. Он покажет
коды ошибки, если во время загрузки системы произойдет сбой. Светодиод
облегчает поиск неполадок. Расшифровку кодов ошибок можно найти на
страницах 35, 36, 37 и 38.
2.12 Указания по установке драйверов
Чтобы установить драйверы на систему, необходимо прежде всего вставить
компакт-диск поддержки в оптический дисковод. После этого будут
автоматически определены драйверы, совместимые с вашей системой, и их
список появится на странице установки драйверов компакт-диска поддержки.
Вам следует установить эти необходимые драйверы в указанном порядке,
сверху вниз. Тем самым будет обеспечена правильная работа установленных
драйверов.
2.13 Установка Windows
64-bit / XP / XP 64-bit на систему с функциями RAID
Подробную информацию об установке ОС Windows
TM
Vista
64-bit / XP / XP 64-bit на жестких дисках SATA3 с функциями RAID см.
в документе по приведенному ниже пути на компакт-диске с информацией о
поддержке: .. RAID Installation Guide
2.14 Установка Windows
64-bit / XP / XP 64-bit на систему с функциями RAID
Если вы хотите установить операционную систему Windows
TM
/ Vista
64-bit / XP / XP 64-bit на компьютер с функциями RAID, выполните
следующие действия.
2.14.1 Установка Windows
функциями RAID
Если вы хотите установить операционную систему Windows
компьютер с функциями RAID, выполните следующие действия.
Использование жестких дисков SATA3 без функций NCQ и горячего
подключения
164
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
®
XP / XP 64-bit на систему с
ASRock 970 Extreme4 Motherboard
TM
TM
/ Vista
®
TM
7 / 7 64-bit / Vista
/
TM
TM
/ Vista
®
7 / 7 64-bit / Vista
®
XP / XP 64-bit на
TM
- Dec 26, 2015
- 11
- 0
- 4,520
- 1
-
#1
I was changing my chassi and everything worked before but when i put all components back in the board showed code 00. What can be wrong?
- Dec 26, 2015
- 11
- 0
- 4,520
- 1
-
#18
Try clearing the CMOS (unplug the power cord and remove the CMOS battery for a minute). Remove all RAMs, start the board and see what code getting.
Everything is the same so i have returned it to the store and i hope i will get a new one.
but thanks for the help.
- Nov 1, 2012
- 39,825
- 248
- 126,990
- 5,837
-
#2
It means that the CPU does not get power, or does not work. Make sure that the 8 pin power cable is properly connected to the motherboard.
- Dec 26, 2015
- 11
- 0
- 4,520
- 1
-
#3
All the components powers on and gets power so i think everything is connected right.
- Nov 1, 2012
- 39,825
- 248
- 126,990
- 5,837
-
#4
I suggest removing the CPU, checking the socket if any bent pin and, if socket ok, reinstalling the CPU and the CPU cooler.
- Dec 26, 2015
- 11
- 0
- 4,520
- 1
-
#5
I suggest removing the CPU, checking the socket if any bent pin and, if socket ok, reinstalling the CPU and the CPU cooler.
Me and my friend did change the cpu and cooler but still 00.
can it be something wrong with the motherboard?
- Nov 1, 2012
- 39,825
- 248
- 126,990
- 5,837
-
#6
You’ve installed different CPU and still 00? Is the CPU fan spinning when starting the board?
- Dec 26, 2015
- 11
- 0
- 4,520
- 1
-
#7
We did not try another cpu. We just took it off and cleaned it and checked if therd was any bent pins. I dont have another cpu so i dont know if that would help. But the computer is only 6month old and it worked yesterday. Bjt now after the chassi change i get the error code.
- Nov 1, 2012
- 39,825
- 248
- 126,990
- 5,837
-
#8
Try taking the board outside the case, for ruling out a short. If still 00, I’d RMA both motherboard and CPU.
- Dec 26, 2015
- 11
- 0
- 4,520
- 1
-
#9
Should i take out the board from the chassi and then reinstall it in the chassi again? I didnt understand clearly.
- Nov 1, 2012
- 39,825
- 248
- 126,990
- 5,837
-
#10
No, put it on a cardboard and test it there.
- Dec 26, 2015
- 11
- 0
- 4,520
- 1
-
#11
No, put it on a cardboard and test it there.
Ok so i put it on a cordboard and start it up.
- Nov 1, 2012
- 39,825
- 248
- 126,990
- 5,837
-
#12
Yes. If still 00, I’d RMA both motherboard and CPU.
- Dec 26, 2015
- 11
- 0
- 4,520
- 1
-
#13
Ok i will do that tomorrow. But thanks for the answers.
- Nov 1, 2012
- 39,825
- 248
- 126,990
- 5,837
- Dec 26, 2015
- 11
- 0
- 4,520
- 1
-
#15
Now i have put the motherboard uot on a cardboard with the cpu and ram and gpu plugged i get the 99 error code. Any idea?
- Dec 26, 2015
- 11
- 0
- 4,520
- 1
-
#16
And the crl cmos light is on.
- Nov 1, 2012
- 39,825
- 248
- 126,990
- 5,837
-
#17
Try clearing the CMOS (unplug the power cord and remove the CMOS battery for a minute). Remove all RAMs, start the board and see what code getting.
- Dec 26, 2015
- 11
- 0
- 4,520
- 1
-
#18
Try clearing the CMOS (unplug the power cord and remove the CMOS battery for a minute). Remove all RAMs, start the board and see what code getting.
Everything is the same so i have returned it to the store and i hope i will get a new one.
but thanks for the help.
- Nov 1, 2012
- 39,825
- 248
- 126,990
- 5,837
| Thread starter | Similar threads | Forum | Replies | Date |
|---|---|---|---|---|
|
G |
Question Burnt EPS receptacle on Asrock X299 ITX | Motherboards | 6 | Yesterday at 10:13 AM |
|
R |
Question Motherboard NVME M2 Drive Detection Issues after new GPU Install | Motherboards | 13 | Friday at 10:28 PM |
|
|
[SOLVED] ASRock B450M Pro4 ReBar | Motherboards | 3 | Feb 1, 2023 |
|
|
Question motherboard help | Motherboards | 1 | Feb 1, 2023 |
|
S |
Question ASRock B550M/ac giving me a bad day | Motherboards | 1 | Jan 30, 2023 |
|
S |
Question AsRock b450 steel legen no post, no beep, no display, after working properly | Motherboards | 7 | Jan 28, 2023 |
|
|
Question Asrock Z77 Extreme 4 mobo + Asus Nvidia 3080 Vid. No boot on first attempt. | Motherboards | 2 | Jan 3, 2023 |
|
T |
Question Bricked Bios on ASROCK 970 extreme 4, dr. debug 0x06 Microcode loading, stuck on Microtrend screen before post (EN) | Motherboards | 3 | Aug 24, 2022 |
|
T |
Question Bricked Bios on ASROCK 970 extreme 4, dr. debug 0x06 Microcode loading, stuck on Microtrend screen before post | Motherboards | 1 | Aug 24, 2022 |
|
T |
Question Asrock Z87 11ac Extreme — Graphics Card Replacement Needed! | Motherboards | 12 | Jun 15, 2022 |
- Advertising
- Cookies Policies
- Privacy
- Term & Conditions
- Topics
Кратко перечислю и опишу некоторые коды:
00
(Необходимо проверить правильно ли установлен процессор и сбросить CMOS)
0d
(Проблема связана с памятью, видеокартой или другими устройствами. Необходимо сбросить CMOS, вытащить, вставить оперативную память и видеокарту, а также извлечь другие USB и PCI устройства)
01 – 54 (кроме 0d), 5A — 60
(Проблема связана с памятью. Необходимо переустановить процессор и оперативную память, потом сбросить CMOS. Если проблема останется, необходимо установить только один модуль памяти или использовать другой модуль памяти)
55
(Оперативная память не обнаружена. Необходимо переустановить процессор и оперативную память. Если проблема останется, необходимо установить только один модуль памяти или использовать другой модуль памяти)
61 — 91
(Ошибка инициализации чипсета. Необходимо сбросить или очистить CMOS)
92 — 99
(Проблема относится к PCI-E устройствам. Необходимо заново установить PCI-E устройство или установить в другой слот. Если проблема не исчезнет, то необходимо извлечь все PCI-E устройства или использовать другой видеоадаптер)
A0 — A7
(Проблема связана с IDE или SATA устройствами. Необходимо переподключить IDE и SATA устройства. Если проблема останется, необходимо очистить CMOS и попробовать отключить все SATA устройства)
b0
(Проблема связана с оперативной памятью. Необходимо переустановить процессор и оперативную память. Если проблема останется, необходимо установить только один модуль памяти или использовать другой модуль памяти. * Для моделей X79, необходимо установить память в слоты DDR3 A1, B1, C1 и D1)
b4
(Проблема связана с USB устройствами. Необходимо отключить все USB устройства)
b7
(Проблема связана с памятью. Необходимо переустановить процессор и оперативную память, потом сбросить CMOS. Если проблема останется, необходимо установить только один модуль памяти или использовать другой модуль памяти)
d6
(Видеокарта не принята. Необходимо очистить CMOS и наново установить видеокарту. Если проблема останется, необходимо установить видеокарту в другой слот или использовать другую видеокарту)
d7
(Клавиатура и мышь не обнаружена. Необходимо переподключить клавиатуру и мышь)
d8
(Неверный пароль)
FF
(Необходимо проверить правильно ли установлен процессор и сбросить CMOS)
Смотрите также мою статью:
Описание звуковых сигналов BIOS
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
-
- Mar 27, 2014
-
- 158
-
- 1
-
- 18,685
-
#1
OK, so been having a problem with my machine for a little while. I don’t always get an output to the monitor when I first boot up….sometimes have to reboot 20-30 times before it does. So, probably failing graphics card right? Well, it’s replacement came today….and I’ve installed and tried to boot with it over a hundred times and nothing. So pretty sure the card is DOA. Gonna put my old one back in a bit….
But I’m wondering, could it be something else other than the Graphics causing this problem?
I get error codes 10 and sometime 84, possibly B4.
I’ve taken my memory out and disconnected all my usb devices. Re seated the graphics several times as well as the memory. I think putting old graphics in it will go back to how it was before, i.e. having to reboot several times to get it to boot.
Hope somebody more knowledgeable than I can help me here? 
Starting to go a bit bald now….from tearing my hair out
-
- Nov 1, 2012
-
- 39,825
-
- 249
-
- 126,990
-
#2
What code getting if starting the board with only CPU and CPU cooler installed?
-
- Mar 27, 2014
-
- 158
-
- 1
-
- 18,685
-
#3
i get error code 19, not seen that before…..
-
- Nov 1, 2012
-
- 39,825
-
- 249
-
- 126,990
-
#4
Have you tried clearing the CMOS (unplug the power cord and remove the CMOS battery for a minute)?
-
- Mar 27, 2014
-
- 158
-
- 1
-
- 18,685
-
#5
yep one of the first things i did and completely replaced cmos battery today….still no improvement i think the problem is getting worse as it now seeming like i have to reboot a lot more times before it finally boots properly
-
- Mar 27, 2014
-
- 158
-
- 1
-
- 18,685
-
#6
any chance it cd be something wrong with the cpu?
-
- Nov 1, 2012
-
- 39,825
-
- 249
-
- 126,990
-
#7
Not sure if solving the problem, but you can try replacing the CMOS battery with a new one and, if still the same, ordering a BIOS chip on ebay and replacing the board’s one. Another thing to try would be a different power supply, if possible to borrow one.
-
- Mar 27, 2014
-
- 158
-
- 1
-
- 18,685
-
#8
as i said already replaced the battery and i dnt think it’s worth it on the BIOS chip, doubtful my soldering skills are up to it and will probably kill the boardi cd try different psu i suppose, got a cheapy nasty one still knocking about somewhere….my money still on the graphic card i think. just bad luck that the 2nd hand replacement is faulty….i’ll levae it overnight see if anybody else can suggest anything, then hunt for that psu tomorrow 
-
- Nov 1, 2012
-
- 39,825
-
- 249
-
- 126,990
-
#9
Your call. The chip is on socket and easy to replace.
-
- Mar 27, 2014
-
- 158
-
- 1
-
- 18,685
-
#10
what u mean on socket? it just pops in and out….? in which case might be worth a try then…but BIOS looks fine as far as i can tell
-
- Nov 1, 2012
-
- 39,825
-
- 249
-
- 126,990
-
- Mar 27, 2014
-
- 158
-
- 1
-
- 18,685
-
#12
had no idea it was that easy! thank you! I’ll try few other ways of trying to fix before i do that as i’m not sure it is BIOS problem…butif all else fails i shall trythat! Not too expensive either…about £8/9…thanks!
-
- Nov 1, 2012
-
- 39,825
-
- 249
-
- 126,990
-
#13
You’re welcome. In the end… maybe it’s time for an upgrade.
-
- Mar 27, 2014
-
- 158
-
- 1
-
- 18,685
-
#14
in a perfect world yeah, but i could barely afford the graphics card hope to get my money back on that…soi can afford the bios chip…i did actually just give it a little push and it felt a little bit loose, didn’t change anything though, still a ah heck to boot but once it’s up it’s up…so more i think on it cd well be the bios!
-
- Mar 27, 2014
-
- 158
-
- 1
-
- 18,685
-
#15
in a perfect world yeah, but i could barely afford the graphics card hope to get my money back on that…soi can afford the bios chip…i did actually just give it a little push and it felt a little bit loose, didn’t change anything though, still a ah heck to boot but once it’s up it’s up…so more i think on it cd well be the bios!
-
- Mar 27, 2014
-
- 158
-
- 1
-
- 18,685
-
#16
ok, so i just tried with another graphics card…and no joy, so definitely not a graphics card issue….reseated all my psu connectors, to make sure it is not that….I’m reasonably confident in that psu though as i not long bought that and i have no power issues since i bought it…i think there wd be issues with my hard drives if it was a faulty psu? so i’m pretty convinced now it is either a) motherboard problem or b) possibly faulty cpu? I was under the impression on cpus though that they either worked or they didn’t…..? is that the case?
now little while back i did have faulty psu, killed a lot of my hard drives hence the replacement….motherboard didn’t seem effected at the time….and this new problem has only started to happen last few months, slowly been getting worse
no way i can afford new mobo though….can barely afford the bios chip, but honestly…how likely is it that that would fix the problem? is the bios chip something that regularly ‘goes’ on motherboards before anything else?
-
- Mar 27, 2014
-
- 158
-
- 1
-
- 18,685
-
#17
think i eliminated possible failing psu by disconnecting all my drives (have 6) + the optical but it still kept doing it….i have a cheap generic/ old psu knocking about but bit loath to risk plugging that into the system, pretty sure it’s not the psu…oh and i did try alternative graphics slot as well, so pretty sure not the slot
-
- Mar 27, 2014
-
- 158
-
- 1
-
- 18,685
-
#18
very surprised! Bios chip came today and it has totally fixed it……so thanks very much geezer, i never wd have thought to try doing that….not an easy job but so worth it!
-
- Nov 1, 2012
-
- 39,825
-
- 249
-
- 126,990
-
#19
You’re welcome.
Glad it helped.
-
- Mar 27, 2014
-
- 158
-
- 1
-
- 18,685
-
#20
not only fixed the problem but machine booting so much faster….i reckon now it came with a faulty chip and over time has been gradually getting worse.
-
- Mar 27, 2014
-
- 158
-
- 1
-
- 18,685
-
#21
ok, thought i had fixed it…but now got an ongoing problem. Graphic card is radeon HD 5450. same card the machine has always had. machine works fine for a few days then locks up, then can’t get past bios as it hangs there….swap out the graphics for this 512gb card i have, then i can boot!, so power down…swap it back to my primary card…then ok for a few days, then it happens again!
error code i get is 62. Which has to do with Southbridge apparently and nothing to do with graphics…..bizarrely clearing cmos doesn’t help either. doesn’t actually clear at all, even when i pull cmos battery out…maybe i didn’t leave it out long enough that time. not tried the pins, just the cmos reset on the back…
this machine has worked fine for a few years…so it could also be partially dodgy/ failing graphics card as well now? i dnt seem to be having any other problems with it…..
-
- Mar 27, 2014
-
- 158
-
- 1
-
- 18,685
-
#22
what is a good cheap 1gb card that works well with this board?
-
- Nov 1, 2012
-
- 39,825
-
- 249
-
- 126,990
-
#23
When clearing the CMOS, make sure that the power cord is unplugged from the wall socket (board not connected to power). As for graphics card, any NVidia up to 900 series should work, if able to find a new one.
-
- Mar 27, 2014
-
- 158
-
- 1
-
- 18,685
-
#24
yeah i did have it unplugged…..i just bought an ASUS EN210 off ebay….i’m very poor, so cheap second hand only option i have atm….says it’s 1GB, not sure how it will compare to the hd5450 though, although the card seems to work fine as far as i can tell, it may not be that that is at fault tbf
Similar threads
- Advertising
- Cookies Policies
- Privacy
- Term & Conditions
Доброго времени суток, такая проблема, было железо которое всё хорошо вместе работало, я поменял материнку на Аsrock 970 extreme4, в связи с тем что там стоит UEFFI а не BIOS при запуске старой винды у меня комп время от времени вылючался или вис, я кое как нарезал винду на флешку под UEFFI взялся переустанавливать.
При установке винды я полностью удалил разделы жд и создал новые что бы поменять разметку, установил, поставил дрова и всё вроде бы хорошо работало пару дней.
Утром проснулся включаю комп а он наглухо виснет на этапе запуска биоса и выдает на посте код 99, если отключить SATA то у меня включается и заходит в биос, ставил другой жд он включается проходит загрузку биоса и висит просто с надписью Асрок на черном фоне
Комплектующие
БП: китаец на 550
Видеокарта: Radeon RX 560
ЦП: FX 8120
ЖД: Seagate (точную модель не помню)
ОЗУ: 8 Гб Kingston 1600
36
ASRock 970 Extreme4 Motherboard
0x37
Post-Memory North Bridge initialization is started
0x38
Post-Memory North Bridge initialization (North Bridge module specifi c)
0x39
Post-Memory North Bridge initialization (North Bridge module specifi c)
0x3A
Post-Memory North Bridge initialization (North Bridge module specifi c)
0x3B
Post-Memory South Bridge initialization is started
0x3C
Post-Memory South Bridge initialization (South Bridge module specifi c)
0x3D
Post-Memory South Bridge initialization (South Bridge module specifi c)
0x3E
Post-Memory South Bridge initialization (South Bridge module specifi c)
0x3F-0x4E
OEM post memory initialization codes
0x4F
DXE IPL is started
0x50
Memory initialization error. Invalid memory type or incompatible memory
speed
0x51
Memory initialization error. SPD reading has failed
0x52
Memory initialization error. Invalid memory size or memory modules do not
match
0x53
Memory initialization error. No usable memory detected
0x54
Unspecifi ed memory initialization error
0x55
Memory not installed
0x56
Invalid CPU type or Speed
0x57
CPU mismatch
0x58
CPU self test failed or possible CPU cache error
0x59
CPU micro-code is not found or micro-code update is failed
0x5A
Internal CPU error
0x5B
reset PPI is not available
0x5C-0x5F
Reserved for future AMI error codes
0xE0
S3 Resume is stared (S3 Resume PPI is called by the DXE IPL)
0xE1
S3 Boot Script execution
0xE2
Video repost
0xE3
OS S3 wake vector call
0xE4-0xE7
Reserved for future AMI progress codes
0xE8
S3 Resume Failed
0xE9
S3 Resume PPI not Found
0xEA
S3 Resume Boot Script Error
0xEB
S3 OS Wake Error
0xEC-0xEF
Reserved for future AMI error codes
0xF0
Recovery condition triggered by fi rmware (Auto recovery)
0xF1
Recovery condition triggered by user (Forced recovery)
0xF2
Recovery process started
0xF3
Recovery fi rmware image is found
0xF4
Recovery fi rmware image is loaded
0xF5-0xF7
Reserved for future AMI progress codes
0xF8
Recovery PPI is not available
0xF9
Recovery capsule is not found
0xFA
Invalid recovery capsule
0xFB – 0xFF
Reserved for future AMI error codes
0x60
DXE Core is started
0x61
NVRAM initialization
English