Раздел: Windows
Написано: 7.07.2020
Автор: Antonio
В Windows 7 нет реализации правильной нумерации последовательности установки обновлений. Поэтому при установке Windows 7 и проведении полного обновления процесс обновления нужно делать не просто — выделили все обновления и нажали установить. Такое действие приведет к ошибке обновления 80246005.
Установку обновлений нужно проводить в ручном режиме и постепенно, по небольшому количеству штук, особенно на медленных компьютерах с ограниченным количеством оперативной памяти (до 2Гб при x86)
Опытным путем установлено, что для решения error 80246005 необходимо установить обновление KB2647753.
Это должно помочь, однако все равно после этого не получится установить любое обновление, пару штук как минимум будут вызывать другие ошибки, поэтому выделяем десяток обновлений не сильно большого размера (не накопительные) и устанавливаем, перезагружаемся по необходимости и продолжаем процедуру.
После этого, когда останется несколько последний обновлений, вы столкнетесь с другой ошибкой 80092004, по ее решению будет отдельная заметка.
-
Home
-
News
- Top 3 Ways to Fix Windows Update Error 80246005 on Your PC
By Alin |
Last Updated
Have you ever encountered Windows error code 80246005 on your PC? Some users complained about this Windows update error. If you are bothered by this issue, this post of MiniTool Partition Wizard tells you a full guide on how to fix it.
The Windows update error code 80246005 mostly occurs when you try to check for updates or try to update your system. It means that either you can’t save files to the Catroot2 folder, or that the Cryptographic Service is disabled or not working properly. This error can prevent you from getting the latest security patches and bug fixes for your system
Some updates were not installed. Error code: 80246005. Kindly guide.
—from Microsoft Community
How to troubleshoot the Windows error code 80246005? Fortunately, there are some methods to fix this error. Here are the detailed steps for each method.
Method 1. Run the Windows Update Troubleshooter
The Windows Update troubleshooter is a built-in tool that can help you diagnose and fix common problems with Windows Update. You can run it to fix the Windows update error code 80246005 with these steps:
Step 1. Press Win + I to open Settings. Then navigate to Update & Security > Troubleshoot > Additional troubleshooters.
Step 2. In the next window, click Windows Update and select Run the troubleshooter.
Step 3. Then follow the on-screen wizard to complete the troubleshooting process. If it detects any problems, follow the instructions to apply the fixes.
Step 4. Once done, restart your device and check for updates again.
Method 2. Change the Attributes of the Catroot2 Folder
The Catroot2 folder is a system folder that stores temporary files for Windows Update. If it is set to read-only, it will prevent Windows from copying or replacing it. You can follow the steps below to change the folder.
Step 1. Press Win + R to open the Run command box. Then type cmd and press Ctrl + Shift + Enter to run Command Prompt as administrator.
Step 2. In the Command Prompt window, type the following command and press Enter.
attrib -h -s -r c:windowssystem32catroot2 (where c: is the drive where Windows is installed)
Step 3. Then type the following command and press Enter.
attrib -h -s -r c:windowssystem32catroot2*.*
Step 4. Once done, type exit and press Enter to close the Command Prompt window.
Step 5. Then reboot your system and check if the issue is repaired.
Method 3. Reset the Windows Update Components
The corrupted or misconfigured Windows Update components may cause the Windows error code 80246005. You can reset the Windows Update components to fix the issue. Here’s how to do that:
Step 1. Run Command Prompt as administrator. Then type the following commands one by one and press Enter after each one.
net stop cryptsvc
net stop bits
net stop msiserver
net stop wuauserv
ren C:WindowsSoftwareDistribution SoftwareDistribution.old
ren C:WindowsSystem32catroot2 Catroot2.old
net stop cryptsvc
net start bits
net stop msiserver
net start wuauserv
Step 2. Once done, close the window and check if the issue disappears now.
Tips:
To fix Windows error code 80246005, you can use MiniTool Partition Wizard to check file system errors and bad sectors. In addition, it can help you manage your partitions and disks with multiple tools.
MiniTool Partition Wizard FreeClick to Download100%Clean & Safe
Conclusion
Now, this post comes to an end. Do you fix the Windows update error code 80246005 successfully? If you have any suggestions or nice methods to solve this problem, you can feel free to share them with us in the following comment part.
About The Author
Position: Columnist
Alin is a new member of MiniTool. Her articles are mainly about disk & partition management, data recovery, and hard disk issues. She is enthusiastic about acquiring computer knowledge and helping users to solve problems with computers. To provide more useful and professional solutions, she will keep learning and know more computer knowledge.
To fix Windows Update error code 80246005, you need to apply small fixes.
You need to provide permission to an important system folder. Then you need to check and restart a few services.
Windows 10 has the inherent advantage of quick updates. But when it’s stalled, your PC or laptop is at risk.
In such cases, you need to fight the root cause of error code 80246005 to make Windows updates work again.
I had two KB Windows updates showing the above problem. It was asking to “Try again”. I did it several times, but the error still remained.
Before you apply the below fixes, make sure your computer if free from firewalls, antispyware software, web accelerators, antivirus programs, and proxy servers kind of errors.
You can make use of Microsoft Defender or Microsoft Security Essentials to run a scan of your system.
Related
- How to Fix Error Code 0xc1900223 in Windows 10 after 1903 update
- Fix NVIDIA Graphics Card Error Code 43 in Windows 10 or 8.1 or 7 – Solutions
- Cause of Error Code 80246005
- Fix #1: Restart Windows Installer service
- Fix #2: Provide Write permission to Catroot2 folder.
- Fix #3: Start, Stop, Restart Cryptographic Service
- Fix #4: Start BITS, Windows Update and other Services
- Fix #5: Windows Update Troubleshooter
- Conclusion
Cause of Error Code 80246005
This can occur in Windows 7 or 8.1 or 10. You might read that it is because of virus or malware. But it is not. This is a Windows Update error code. So you need to restart services related to Windows Update process.
The Catroot2 folder might not have write permission, which is one of the cause. Then there are two other services which are not running. These are – 1. Cryptographic Services 2. Windows Installer.
Source: https://answers.microsoft.com/en-us/windows/forum/windows_other/error-code-80246005/94a9434b-948c-4183-986e-ddf062724ae7
These are two main culprits for error code 80246005.
Related –
- [Solved] Outlook Error 0x8004010F in 2010 or 2013: Data File Cannot Be Accessed
- How to Fix Windows Update Error 0x80245006 in Windows 10, 8.1 and 7?
You can send Windows Diagnostic information to Microsoft Support team for analysis. But this will take time and you need to be an expert to find the key details.
Microsoft has released a document related to Windows Update errors. Some of the commonly seen error codes are – 0x0xc1900223223; 0x80240034; 0x8007000E, 0x80242006, 0x80244018, 0x80D02002, 0x80246017, 0x80240438, 0x80070070, 0x8007000D, 0x80246008, 0x80096004, 0x80070020.
Related
- How to Solve 0x800f081f Error Code in Windows 10
In this post we are going to see 5 solutions to fix error code 80246005 to make Windows Update work again.
Fix #1: Restart Windows Installer service
This is the best fix of all the below solutions to fix windows update error.
- Press Win + R and Run dialog opens.
- Type services.msc.
- Click the tab “Standard”.
- Then sort the services based on name.
- Go to “Windows Installer” service.
- Generally, it is set to “Manual” and stopped.
- You can try to start it. If it is running, stop it and restart it.
- Then you can set the Startup Type also as “Automatic”.
This worked for me in Windows 7.
Fix #2: Provide Write permission to Catroot2 folder.
If Windows Update process fails to write files to Catroot2 folder, then also this error can occur.
So you need to remove read permission for that folder. Or give access to Windows Update to write to this folder.
This can be done in this way.
- Press the Win key and type “cmd”.
- Right-click the command prompt app and run as administrator.
In older versions of Windows 10, you can also right-click the Start button and find it.- Command prompt window opens.
- Type the following commands.
In older versions of Windows 10, you can also right-click the Start button and find it.attrib -h -s -r c:\windows\system32\catroot2 attrib -h -s -r c:\windows\system32\catroot2\*.*
- C: is the Windows drive or where Windows 10 is installed.
- Press Enter after each command.
This will give write access to Catroot2 folder to Windows Update program.
Fix #3: Start, Stop, Restart Cryptographic Service
This is another service which causes the error code 80246005.
- Open “Services” as mentioned earlier.
- Find the “Cryptographic Services”.
- Stop and Restart it, if it is running.
- Otherwise, just start it.
Fix #4: Start BITS, Windows Update and other Services
In Windows 10, you can find some other services related to Windows Update. These are the following.
- Background Intelligent Transfer Service
- Windows Update
- Windows Defender Firewall
Also make sure your system time is correct. Check whether your CMOS battery is working on your laptop or pc. Otherwise, update to the latest time using Internet services.
These are the two main services connected to update Windows 10 or 8.1 to the latest version. If they are not working, then also error code 80246005 can occur.
You can start them. Otherwise, restart them.
Fix #5: Windows Update Troubleshooter
This can be done in different ways in Windows 7 or 10. I will mention the new method in Windows 10.
- Press Win + I keys together to open Settings.
- Click on “Update & Security”.
- Scroll through, to click on “Troubleshoot”.
- On the right-hand side, you should see “Windows Update”.
- Click it. “Run the troubleshooter” button should be available.
- This will run the Windows Update troubleshooter program in Windows 10.
Many-a-times, it will fix error code 80246005 problems.
Conclusion
The above mentioned 5 methods should work to cure error code 80246005 in Windows 10 or 7. The interface might look different in Windows 7 or 8.1 or 10. But the steps are similar.
You just have to provide write access to Catroot2 folder and restart a few other services.
This should make Windows Update healthy and up and running again.
Palla Sridhar is the writer and admin for WindowsTechIt.com. His primary focus is to write comprehensive how-tos and solutions guides for Windows 11, 10, Skype, Outlook, HDMI, Redmi, Facebook, Google, Tech Apps and LinkedIn.
Is your Windows 10 Computer or Laptop showing error code 80246005 while checking for the Windows Update?
If your answer is YES, then you are in the right place..!!!
Don’t worry; I will discuss each and everything about how to fix the Windows Update error 80246005 without calling any professional.
So, read the blog thoroughly and follow the fixes carefully to resolve error 80246005.
Causes of the Windows Update Error 80246005
If you have received error code 80246005 on your Windows 10 Computer or Laptop, then it means that there is malware or virus infection in your system. The Windows update error code 80246005 usually prompts when you are updating your Windows operating system, installing Windows applications or it might cause when you start or shut down the system.
But, sometimes some other programs also cause error 80246005 by preventing the Windows Update Service (SVCHOST) from accessing the web. Programs like firewalls, antispyware software, web accelerators, antivirus programs, and proxy servers might also cause Windows error. So, the important thing is that if you have downloaded any of the above programs then you need to turn them off at the time of downloading and installing the Windows Update. And after updating your PC you can turn them on.
This Windows update error 80246005 appears when the user tries to check for the updates or try to update their system. The update error code 80246005 appears when the operating system becomes unable to save the updates to the Catroot2 folder; it is an important component for downloading and installing updates. Sometimes when the Cryptographic Service is disabled or not functioning correctly then you will also face this type of 80246005 error message.
The Cryptographic Service nothing but a DLL file that is responsible for the operations of a system program interfaces. In order to fix the error, you must repair the Catroot2 folder or troubleshoot the Cryptographic Service.
The reason behind this issue is clear, and we only need to fix the system so that it can save files to the Catroot2 folder or start the Cryptographic Service properly. Simply, follow the below-given solutions to get rid of Windows update error 80246005 or 0X80246005.
Solution 1: Save the Files to the Catroot2 folder
It is a very important step because the Windows update fails if Windows was not able to copy files to the Catroot2 folder or swap files that are in that folder or else the folder or its files are set to read-only. Follow the steps given below to modify so that folder to write files to it:
- First of all, click the Start button, and in the search box, type the command prompt.
- In the appeared result list, click right Command Prompt, and after that click on Run as Administrator.
- If any prompt appears for administrator password or confirmation, then type the password or gives the confirmation.
- And at the command prompt type attrib -h -s -r c:\windows\system32\catroot2 (where c:\ is the drive where Windows is installed), and press Enter.
- And after that type attrib -h -s -r c:\windows\system32\catroot2\*.* (where c:\ is the drive where Windows is installed), and hit Enter.
- And lastly, type Exit and hit Enter to shut the Administrator: Command Prompt Window.
Solution 2: Verify and Restart the Cryptographic Service
To Verify and Restart the Cryptographic Service, just follow the steps given below:
- You need to open the Administrative Tools by clicking on the Start button, and then click Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
- Now, double-click on the services. If any prompt appears for administrator password or confirmation, then type the password or gives the confirmation.
- Then click on the Name Column heading to arrange the names in reverse order and find the Windows update service.
Note – the status of the selection (the status appears in the third column).
Right-click on Windows Update, and then perform any one of the following steps:
- If Start is presented, then click Start.
- If Restart is presented, then click Restart.
Then click on the Name column heading to arrange the names back in alphabetical order, and after that click on Cryptographic Services.
Note – the status of the selection (the status appears in the third column).
And then right-click Cryptographic Services, and then perform any one of the following steps:
- If Start is presented, then click Start.
- If Restart is presented, then click Restart.
Lastly, close the Services dialog box.
After attempting all these processes, go to the Microsoft Official website.
Easy Solution to Fix Windows Update Error 80246005
By following the above solutions, you will able to fix the error 80246005. But sometimes manual solutions won’t work to fix this error.
So, it is recommended to go with a professional tool, i.e. PC Repair Tool to fix the Windows update error code 80246005 completely. This software has the ability to detect any errors restore settings, cleans the Windows registry, and also acts as a guard to tune, maintain, and run PC smoothly at maximum speed.
As well as with the help of this tool, you can also fix different types of Windows errors such as Windows Startup Errors, Windows Installer Errors, DLL Errors, BSOD Errors, Registry Errors and many more.
Get PC Repair Tool to fix Windows Update Error 80246005
Conclusion
Well, I tried my level best to provide you convenient and effective ways to fix the Windows update error 80246005.
I hope the specified solutions will definitely help you to get rid of this error code.
Thus, make proper use of them, and in the future also if you come across any kind of such Windows related issues & errors, then by following the above solutions you can easily get rid of this with ease.
Always up to help others with their PC-related issues, Jack loves to write on subjects such as Windows 10, Xbox, and numerous technical things. In his free time, he loves to play with his dog “Bruno” and hang out with his friends.
As the name suggests Windows Update Error 80246005 often occurs while updating the OS, installing applications and more. Here are the fixes that’ll help you rid your system of this error.
As I mentioned above, this particular error often pops up when users try to update Windows OS or when the OS itself fails to store updates to the Catroot2 folder.
There are also other reasons behind this error and the following are the fixes that will help you remove the error and update your Windows.
Fix #1
The first fix for the Windows Update Error 80246005 is to modify the Catroot2 folder a bit. Click on the search bar, type “CMD” and run it as administrator. Type “attrib -h -s -r c:\windows\system32\catroot2” and press enter. Then type “attrib -h -s -r c:\windows\system32\catroot2\*.*” and press enter. Exit CMD, restart your PC and the error will be fixed.
Fix #2
If the error is still isn’t fixed then you need to restart the Cryptographic Service to fix the error and here is how to fix it. Click on the search bar, type “Services” and run it. From the right side of the window look for “Windows update service”.
Right-click on it and select “Restart” or “Start” whichever is available. Now look for “Cryptographic Services” > right-click on it and select “Restart” or “Start” whichever is available. restart your PC and the update error is now fixed.
That is all for our fixes for Error 80246005. If you are facing other PC errors and issues then also check our hub for commonly occurring PC errors and their fixes.