-
Dimass
Пользователь- Регистрация:
- 11.01.2015
- Сообщения:
- 1
- Симпатии:
- 0
Доброго времени суток всем!Ребят,извините,если такой вопрос у кого где проскакивал..не отыскал.
В общем,при обновлении ps3 slim cech 3008B возникла ошибка 8002F1F0…и при перезапуске начинается бесконечный цикл обновления с, опять же этой, ошибкой. Сколько не прочитал форумов,после всех манипуляций с прошивками,заменой жесткого-итог один…тоже самое.Сам живу в Калининграде,официалов нет,относил в пару сервисов по ремонту PS,разводят руками-аппаратная проблема,они не занимаются таким.
Подскажите как быть?
Спасибо -
IGOALI
Пользователь- Регистрация:
- 13.01.2015
- Сообщения:
- 1
- Симпатии:
- 0
Здравствуй Dimass , да эта аппаратная проблема, конкретно проблема WLAN/Bluetooh , ты должен был заметить признаки на это при включении PS3 не горит светодиод на прeставке Wireless, в правом углу должно высвечиваться устройство работает неправильно также безпрободной джойстик только работал с USB шнуром , поменяй WLAN/Bluetooh прошивка пойдет как по маслу и будет OK!!! http://www.psdevwiki.com/ps3/File:SP88W8781.jpg
Последнее редактирование: 14.01.2015
-
Назарио
Пользователь- Регистрация:
- 27.09.2015
- Сообщения:
- 1
- Симпатии:
- 0
Привет всем. Столкнулся с похожей проблемой, позвонил официалам, долго жал кнопки под руководствым вышеупомянутых…. Результат ноль!
Короче пытливый ум не дал рукам покоя ))). Дождался когда выскочит ошибка, вырубил долгим нажатием. Потом удерживая кнопку вкл до первого бипа (7…10) сек. стал ждать, первая загрузка прошла нормуль (маштаб экрана был увеличен) похоже загрузилась предыдущее успешное обновление. Далее полез в магаз где потребовалось обновление.. рискнул! Все хорошо загрузилось.
Всех успехов.
Поделиться этой страницей
8002F1F0 PS3 Error Code
Discussion in ‘Windows Error Code, Crashes, BSOD, and Hangs’ started by securityhope, Feb 10, 2017.
-
securityhope
Administrator
Staff Member- Joined:
- Aug 3, 2016
- Messages:
- 1,241
- Likes Received:
- 0
- Trophy Points:
- 36
There was a problem with the PS3 system’s wireless area network (WLAN) and/or Bluetooth functionality.
Solution:- Download and install the latest system software update. Click here to learn how to update the PS3 system.
- For more tips and hints on using your PlayStation system, visit our technical support forums at community.eu.playstation.com.
securityhope,
Feb 10, 2017
#1
Share This Page
Share
- Your name or email address:
- Password:
-
Forgot your password?
-
Stay logged in
-
Home
-
Forums
-
Gaming Platforms
-
Console Modding
-
PlayStation 3 Modding
You should upgrade or use an alternative browser.
Tutorial Ps3 Update loop Error 8002F1F0 Fix
-
Thread starter
Falcon -
Start date
-
Views
6,255
-
#1
Falcon
PlayStation Master
- Messages
- 1,802
- Reaction score
- 1,038
- Points
- 470
- Sin$
-
0
1. Install Rogero 3.55 Downgrader.
2. Toggle QA (Wait till you hear it beep)
3. Download Rogero 4.30 v2 LV2
4. Install it Now you wont get stuck in a loop after installing it.
5. if no issues happen Just install Rogero 4.50 or what ever Cex CFW you use.
6. You have Now bypassed the Ps3 8002F1F0 error Enjoy
Downloads
-
#2
MARSCUB
Newbie
- Messages
- 22
- Reaction score
- 0
- Points
- 35
- Sin$
-
0
Also, I believe the error you mentioned comes up if I click on the *app* file above *Install Packages*.
Similar threads
-
Home
-
Forums
-
Gaming Platforms
-
Console Modding
-
PlayStation 3 Modding
-
Interested in going back to the glory days of Halo modding?
Check out MiDNiGHTsoftware’s thread to see the latest in Halo: MCC modding!
(Click Here)
Share:
So Recently a console came in and I downgraded it and after downgrading I had to install a Cfw Of some sort so I always put any console I get on Rogero 4.50 so to do that you have to go to Rogero 3.55 downgrader. After getting Downgrader installed I toggled QA and put 3.55 OFW on the USB Now I noticed that the ps3 said on the top Unknown USB Device connected. Witch was odd So I tried Installing 3.55 and it decided to loop the update So the only fix was wiping the hard drive. after doing so it still continued. So the issue is the BTN Witch is the Wireless Blue tooth device It can only be removed with a rework station. Now to bypass this all we need to do is install a CFW with Lv2 checks disabled so here’s how we do it.
1. Install Rogero 3.55 Downgrader.
2. Put Ps3 Into Recovery Mode
3. Download Rogero 4.30 v2 LV2
4. Install it Now you wont get stuck in a loop after installing it.
5. if no issues happen Just install Rogero 4.50 or what ever Cex CFW you use.
6. You have Now bypassed the Ps3 800
2F1F0 error
credit- Forums/p=36918931/tutorial-ps3-up…l#36918931
Current rating: 2.00 by 2 users
Please take one second and rate this tutorial…
| Not a Chance |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
Absolutely |
Go to PS3
Error 8002f1f0 Update Loop
So, as the title suggests my PS3 is in an update loop.
When originally updating to 4.80 I elected to download direct to the PS3. This was all well and good until reaching about 46% on the install and I get the error code ‘8002f1f0’. It suggests turning off the PS3 and unplugging the power cord for a few minutes. I left mine a week to be on the safe side lol.
Anyway, fast forward to tonight and I tried it again. It managed to pass the dreaded 46% and fly into the 60% range and I had high hopes, only to be let down yet again.
I downloaded the 4.80 update to a USB and tried to start the PS3 in safe mode, but alas it defied my will to start in safe mode and continued on the ever frustrating update loop.
Help me r/PS3, you’re my only hope.
UPDATE: Did some searching last night and I found a guide here that helped with getting my system into safe mode. I followed this guys instructions and all was going well, I had 4.80 on a usb and I thought I was in the clear. Nope, Sony’s still fucking with me! Got to 46% and failed again.
Attempted the same method but with 4.78 patch. Same shit, different attempt. I’m out of ideas. Anyone have any advice at all? Obviously I would prefer not to reformat my HDD as there goes all of my game saves etc.
UPDATE 2: Took a couple of goes but I persisted with the method above and the 4.78 patch. Got through eventually then did a system file restore and system database rebuild. Was hanging out to play online so I tried with the 4.80 patch on a USB, no dice.
Anyone else experiencing issues with updating to 4.80??