В сегодняшней статье мы с вами рассмотрим довольно неоднозначную проблему в виде ошибки 8002a224 на PS3. Несмотря на то, что консоль PS3 является продуктом предыдущего поколения, огромное множество игроков все еще проводят кучу времени за ней. Тем не менее за последнее время многие пользователи при попытке войти в PSN сталкиваются с кодом ошибки 8002a224.
8002a224: ошибка на PS3
Сразу нужно указать, что практически во всех случаях с данной ошибкой встречаются владельцы прошитых PS3, которые пытались изменить CID своей консоли, чтобы снова получить доступ с сервисам PSN. По-сути, ошибка 8002a224 является сигналом того, что пользователь ввел некорректно CID.
Если вы столкнулись с такой ошибкой, то вам нужно убедиться, что вы правильно ввели свежий CID. Знайте, что даже один пробел в начале или конце идентификатора может вызвать данную ошибку. Например, если пытаетесь заменить CID на PS3 с помощью программы SEN Enabler, то убедитесь, что вы корректно копировали идентификатор в нужный вам текстовый на USB-хранилище.
Тем не менее существует еще один небольшой способ, с помощью которого вы можете попробовать избавиться от ошибки. Итак, откройте на своей PS3 программу Rebug Toolbox и перейдите в раздел «Utilities». Опуститесь в самый низ списка утилит и выберите опцию «Change Active PS3ID», после чего выберите «Use EID5: 87 (CEX)». Как только вы это сделаете, закройте Rebug Toolbox и попытайтесь зайти в PSN — на этот раз ошибки 8002a224 на PS3 быть не должно.
- Главная
- Форум
- PSJailBreak для Playstation 3
- Программы и программные проблемы с PS3
- Ошибка 8002A224
Ошибка 8002A224
-
Оффлайн
ave187
Звание: Профи!
Эксперты
Сообщений: 4929
Симпатий: 135
Трофеев: 11
Подменяю CID ? с помощью sen enabler на
100% рабочий
.
Пытаюсь зайти в psn. Не пускает с ошибкой 8002A224.
Народ спасайте! Гугль все советы даёт по dex прошивкам.
Которые у меня никогда не стояли.
Хэлп кароче!)
0000000000
Сообщение отредактировал ave187 13.09.2014 в 20:40
Казань
Прошивка PS3,/PS2/Nintendo 3DS/2DS
Freeboot Xbox 36013 Сентября 2014 — 18:53 / #1
-
Оффлайн
unknown
Звание: Форумщик
Посетители
Сообщений: 163
Симпатий: 22
Трофеев: 6
8002A224:не существующий CID.Тоесть ConsoleID введен некорректно.
P.S. сам когда-то столкнулся с данной ошибкой,пока не вставил CID точно по текущему шаблону:# #
# SEN Enabler patch file #
# #ConsoleID: 000000010087000B1404C0BХХХХХХХХ
В моем случае ошибкой было отсутствие пробелаave187 нравится это сообщение.
я в вконтакте http://vk.com/unknown_russ
14 Сентября 2014 — 03:53 / #2
-
Оффлайн
xXx2o1o
Звание: Специалист
Посетители
Сообщений: 645
Симпатий: 35
Трофеев: 8
unknown, У него ID правильный, рабочий.
#420 #187 #1337
14 Сентября 2014 — 07:32 / #3
-
Оффлайн
unknown
Звание: Форумщик
Посетители
Сообщений: 163
Симпатий: 22
Трофеев: 6
xXx2o1o,
У него ID правильный, рабочий.
Понятное дело,я имею ввиду,что возможно он не правильно копировал ConsoleID в шаблон.Вот поэтому и вылазит ошибка 8002A224.Сам с подобной проблемой сталкивался.
ave187 нравится это сообщение.
я в вконтакте http://vk.com/unknown_russ
14 Сентября 2014 — 08:22 / #4
-
Оффлайн
ave187
Звание: Профи!
Эксперты
Сообщений: 4929
Симпатий: 135
Трофеев: 11
Цитата: unknown
В моем случае ошибкой было отсутствие пробела
Где конкретно?
Цитата: unknown
ConsoleID: 000000010087000B1404C0BХХХХХХХХ
В моем случае ошибкой было отсутствие пробелаА в моём случае один пробел был лишним!
Спасибо тебе огромное, человечище!
Респект и море благодарности!!!
Сообщение отредактировал ave187 14.09.2014 в 21:26
Казань
Прошивка PS3,/PS2/Nintendo 3DS/2DS
Freeboot Xbox 36014 Сентября 2014 — 19:49 / #5
Пользователи которые читают эту тему
Сейчас онлайн:1
(пользователей:0, гостей: 1)
That is probably happening because, fckpsn masks your PS3’s ID with a fake one, so banning the fake ID, would stop all fckpsn users from accessing PSN.
All they had to do was ban this ID ‘00000000000000000000000000000000000000000000000000000000000000000000000000’
cant it be changed by one digit to regain access?
Changing the odd digit still gives the error, also tried using PSIDpatch with same results
Maybe Sony is checking for a valid Console ID (like Microsoft), you can try to fake an «almost-valid» Console ID.
Actually I have the flash of my PS3 in a bad state and I need to buy a flasher to restore it, so I can’t test
I have tried multiple console IDs including almost identical to my own but still the same error, I do have a 4.25 ps3 which I have blown the logic board so its no good to me. Is there any way to get the console ID from this using a proxy, I then could try this ID in fckpsn?
drizzt, is there a way to NOT spoof your consoleid and just run fuckPsn like that? I tried to remove the console ID code all together but it wouldnt work
Its not the console ID. I also commented out the consoleid code and threw some debug output to make sure it’s sending my valid id, and it is, still 8002A224. I also tried updating the X-I-5 version from ps3devwiki, still no luck. The code is dying at line 188 of the current git revision.
yea im thinking ssl server checks for something present or not present in cert.key or the cert.pam file. i know nothing of ssl :-(.. all ive gathered is cert27 is to trust fuckpsn as ssl server. fuckpsn is middleman. i went as far as using new certs and adding new psn encrypted passphrase to vsh at correct offsets per devwiki and spoof 4.25. still asks to upgrade.
can it be that psn is blocking every console id from 3.55 so that its running a control and if its that can it be solved by letting fuckpsn work on only the 4.25 spoofer?
It’s definitely not the cert’s.I was able to create my own key, self sign a cert; and put it on ps3 only for it to come up with the same error. The key, pem and ca27 are only used so ps3 trusts ruby as dns. I’ve tried using a legit console id, and changed my psid. Only thing i haven’t done is to spoof my ps3 mac id. I really don’t think that’s the cause though. Oh well guess I’ll get back to my single player games. Psn was fun while it lasted though.
yh i can confirm everything amrioray says. hope some 1 gets it working soon
Since the release of 4.11 pass key has not changed, f * ckPSN its uses, but drizzt eblan to ololo-conspiracy to forge a single ZERO ID prefix when connecting through this flawed a program, as a result — this ID ban quickly. Now found a way to snitch pass key, so no matter how much they did not change the Sony, the next day will be a new network. Well fuck you, I’m sitting in the last month on PSN 3.55, ololo in MAG
http://www.psjailbreak.ru/forum/topic_3539
yh ok changing the id from 000 to spoof or another real 1 does not work and i dont have a clue what else your saying.
im voting troll on this 1
When I looked at the Ruby script, it did appear as if the error being shown is the PS3’s connection to the proxy ending abruptly. That leads me to be believe there is a problem with the way the proxy was handling the traffic, not necessarily PSN banning the zeros or the passphrase being wrong.
I was not able to get the proxy to work at all with the substitutions commented out, even with CA27 replaced with the right key.
http://pastie.org/private/cmocrfzdqly7wvpyx7ztg
here is the source code from the modded version of fuckpsn the v0.9c version, the reason the «roblem with the way the proxy was handling the traffic» is due to the obvious differnce between these 2 sources
I’m still getting the same error code while using Charles with all of the headers set and local file mapping, and using the modified version luckystar posted, which only comments out the console id substitution.
Are you able to sign in when previously having 8002A224?
yh its not the only difference. for a start the platform version is different aswell.
made a pullrequest with the required changes, to get psn working again.
Omg do you got fckpsn working ?
yep its working download the latest official fuckpsn — version 1.0
Jou must spoof to 4.25 or else it wont work
i am not on 4.25 spoof im just on 3.55 no spoof
On 15 October 2012 06:47, lanaiscool notifications@github.com wrote:
Jou must spoof to 4.25 or else it wont work
—
Reply to this email directly or view it on GitHubhttps://github.com//issues/6#issuecomment-9434875.
Post: PSN Error 8002A224 fix and sticks
If you are getting this error and hate that you have to manually change your IDPS every time you turn on your ps3, then follow these few easy steps
Firstly make sure on rebug toolbox that your Lv2 kernal and target type is on dex, system mode on rebug, and toggle cobra mode and webMAN are enabled and restart your ps3
Now that your ps3 has restarted, go to webMAN Games under the games tab and click on it, then click on webMAN setup, then click on (PS3)webMAN setup
Next scroll down till you see 2 boxes that say IDPS and PSID (Note: Take a picture or write down all the four boxes (2 by 2) before doing the next step) under “change idps and psid in lv2 memory at system startup. MAKE SURE YOU CLICK ON THE TWO BOXES TILL IT HAS A CHECK MARK.
In the first box next to IDPS, look for the number 82 and change 82 to 84; then scroll down and save
After you click save, Follow the text (Click (Here) to restart your playstation 3 system)
And last do what you need to do to sign in and try signing in and it should work and stick so you don’t have to go to rebug and ps3ita manager and manually change the IDPS every time you restart your ps3
I take no credit for this, i just found someone explaining it on another site and just wanted to clarify and share to everyone who’s having the same problem.
You must login or register to view this content.
Tested on Rebug D-REX 4.75.1 CFW and Rebug D-REX 4.75.3 CFW
Also i am not responsible if anything goes wrong, so do this at your own risk!!!
The following 9 users say thank you to applejacks2023 for this useful post:
The following 2 users groaned at applejacks2023 for this awful post:
Is this tutorial working for all those who tried it
Originally posted by applejacks2023
If you are getting this error and hate that you have to manually change your IDPS every time you turn on your ps3, then follow these few easy steps
Firstly make sure on rebug toolbox that your Lv2 kernal and target type is on dex, system mode on rebug, and toggle cobra mode and webMAN are enabled and restart your ps3
Now that your ps3 has restarted, go to webMAN Games under the games tab and click on it, then click on webMAN setup, then click on (PS3)webMAN setup
Next scroll down till you see 2 boxes that say IDPS and PSID (Note: Take a picture or write down all the four boxes (2 by 2) before doing the next step) under “change idps and psid in lv2 memory at system startup
The first box next to IDPS, look for the number 82 and change 82 to 84; then scroll down and save
After you click save, Follow the text (Click (Here) to restart your playstation 3 system)
And last do what you need to do to sign in and try signing in and it should work and stick so you don’t have to go to rebug and ps3ita manager and manually change the IDPS every time you restart your ps3
I take no credit for this, i just found someone explaining it on another site and just wanted to clarify and share to everyone who’s having the same problem.
You must login or register to view this content.
Tested on Rebug D-REX 4.75.1 CFW and Rebug D-REX 4.75.3 CFW
Also i am not responsible if anything goes wrong, so do this at your own risk!!!
Originally posted by applejacks2023
Is this tutorial working for all those who tried it
Didn’t work for me. Im on Drex 4.75.3
still same message.
go to rebug toolbox and see if you debug menu is on debug menu type CEX QA. if not change it to CEX QA. Also go to Debug settings on your xmb menu under settengs, look for System Update Debug and turn it on and restart your ps3. if that doesnt help ill try to look more into whats the problem
Originally posted by superzdar
Didn’t work for me. Im on Drex 4.75.3
still same message.
one last thing i forgot to mention in the post where it says «Next scroll down till you see 2 boxes that say IDPS and PSID» is that you have to click on the check boxes for both so that they have a check mark next to them, and then save that. Maybe thats the problem
Originally posted by applejacks2023
one last thing i forgot to mention in the post where it says «Next scroll down till you see 2 boxes that say IDPS and PSID» is that you have to click on the check boxes for both so that they have a check mark next to them, and then save that. Maybe thats the problem
Its good now!
the tutorial helped you out with your problem. Thats good to hear.
Originally posted by applejacks2023
If you are getting this error and hate that you have to manually change your IDPS every time you turn on your ps3, then follow these few easy steps
Firstly make sure on rebug toolbox that your Lv2 kernal and target type is on dex, system mode on rebug, and toggle cobra mode and webMAN are enabled and restart your ps3
Now that your ps3 has restarted, go to webMAN Games under the games tab and click on it, then click on webMAN setup, then click on (PS3)webMAN setup
Next scroll down till you see 2 boxes that say IDPS and PSID (Note: Take a picture or write down all the four boxes (2 by 2) before doing the next step) under “change idps and psid in lv2 memory at system startup. MAKE SURE YOU CLICK ON THE TWO BOXES TILL IT HAS A CHECK MARK.
In the first box next to IDPS, look for the number 82 and change 82 to 84; then scroll down and save
After you click save, Follow the text (Click (Here) to restart your playstation 3 system)
And last do what you need to do to sign in and try signing in and it should work and stick so you don’t have to go to rebug and ps3ita manager and manually change the IDPS every time you restart your ps3
I take no credit for this, i just found someone explaining it on another site and just wanted to clarify and share to everyone who’s having the same problem.
You must login or register to view this content.
Tested on Rebug D-REX 4.75.1 CFW and Rebug D-REX 4.75.3 CFW
Also i am not responsible if anything goes wrong, so do this at your own risk!!!
Retail console id target should be 87 not 84
I have always used 87 on every jailbreak i do but im in the UK maybe its something to do with the regions.
The following user thanked rothwell2014 for this useful post:
well i live in the US so maybe its different by region
The following user thanked applejacks2023 for this useful post:
When I try to sign in the error went away but a system update pops up. How do I bypass this?
RealCFW
Avid Poster
Determined Poster
Active Member
-
- Sep 12, 2016
-
- 903
-
- 749
-
- 163
-
-
uk
-
#1
Hi guys I see a lot of people having this issue and I found out how to resolve it Here are the steps:
1. You will need a package file called PS3ITA Manager 1.51 Found Here: http://www.ps3ita.it/download/homebrew/PS3ITA_Manager_v1.51.pkg
2. Once you open it you will need to go to network settings. Now if you use your Original CID you will have to click Restore Original ID. If you use a different ID then you will haev to re-enter it. (You have to do this)
3. You will now need REBUG Toolbox. (Go to rebug.me to get it) And scroll all the way to the right then all the way down. You will have to set your EID to CEX. (Even if you swapped to DEX)
4. Enjoy PSN
Well here ya go guys, this is a very simple tutorial.
PLEASE NOTE: YOU HAVE TO DO THIS EVERY TIME YOU RESTART/TURN ON YOUR PS3 (It doesn’t stick permanently)
Posted by RealCFW.
RealCFW
Avid Poster
Determined Poster
Active Member
-
- Sep 12, 2016
-
- 903
-
- 749
-
- 163
-
-
uk
Zrandi
Avid Poster
Determined Poster
Active Member
-
#5
cfw ferrox cobra not works