3403d ошибка mac os - Решение и исправление самых разных ошибок на TopOshibok.ru

Hi,

I’m currently trying to run an apple hardware test on a mid 2010 21.5″ iMac running osX Mavericks as the iMac is running very slowly so I suspect a HDD failure is imminent.. Upon pressing (option + D) on start-up i’m greated by the image of a globe with it trying to connect and download. then being displayed with the error code -3403d. I have already searched the forums for this error and no one has gotten a reply, so I thought i’d start a new thread and get it to the top of list. I have made sure i am connected to my network, i am using an ethernet cable to do this. I can boot into recovery mode with (command + option + R). I have tried running first aid on both the HDD itself and the partition that MacOS is installed on.

Any help would be greatly appreciated.

I think that error code means that AHT can’t be located. You need to run AHT from the 10.6 Applications Install Disc 2 that came with your iMac.
Here are some instructions:
https://support.apple.com/en-us/HT201257
Here are some step from the above link:
Using Apple Hardware Test on computers with OS X v10.7 and earlier:
1. To start AHT on these computers make sure the Applications Install Disc 2 is inserted into the built-in optical drive

2. Shut down your computer. Then, press the power button to turn it back on.

3. Press and hold the D key before the gray startup screen appears.

4. It takes a minute or so for AHT to start up and inspect your hardware configuration.

5. When the process is complete, select your language and click the right arrow. If you aren’t using a mouse, you can use the up and down arrows to select a language and then press the Return key.

6. The AHT console appears. You can choose which sort of test or tests to perform:
To perform all of the basic tests, click the Test button or press the «T» key or the Return key.
To perform a more thorough diagnostic test, select the «Perform extended testing» checkbox under the Test button before you click the Test button.
Note: Your test results will appear in the window in the bottom-right of the console.

7. To exit AHT, click Restart or Shut Down at the bottom of the window.

Apple Diagnostics: Reference codes:
https://support.apple.com/en-us/HT203747

Last edited: Nov 19, 2015

Hi Coastal,

Thanks for your prompt reply. Unfortuantely for me I no longer have the discs that came with the iMac. Is there anywhere i can download the discs or a copy of the Apple Hardware test that can be ran standalone? I’m not sure if this exists. If worst comes to worst I’ll have to flatten and reinstall. It’s just annoying as I think there maybe an underlying issue with the hardware. I’m experciancing some serious stability issues. I have other diagnostics software for normal PC’s but unfortunately it doesn’t run on Mac’s.

Any further help would be greatly appreciated.

Hi Coastal,
Thanks for your prompt reply. Unfortuantely for me I no longer have the discs that came with the iMac. Is there anywhere i can download the discs or a copy of the Apple Hardware test that can be ran standalone? I’m not sure if this exists. If worst comes to worst I’ll have to flatten and reinstall. It’s just annoying as I think there maybe an underlying issue with the hardware. I’m experciancing some serious stability issues. I have other diagnostics software for normal PC’s but unfortunately it doesn’t run on Mac’s.
Any further help would be greatly appreciated.

Well, I understand AHT can be downloaded from github. I have not done this or downloaded from them before so you are on your own, but it is the only download option that I know about.
https://github.com/upekkha/AppleHardwareTest

Источник

Looks like no one’s replied in a while. To start the conversation again, simply

ask a new question.

Hello community,

Id like to run an Internet AHT (no DVD with me)on my mid-2010 MacBook Pro but this message always appears:

apple.com/support -3403D.

Anyone knows about this error?

Thanks for your help

MacBook Pro (13-inch Mid 2010),

OS X Yosemite (10.10)

Posted on Oct 21, 2014 11:48 AM

1 reply

Question marked as
★
Helpful

Oct 28, 2014 1:33 PM in response to ghjorazz

Try booting the MBP with the OPTION+D keys. It may work.

If you had the original install DVDs, you would not have this problem. Duplicates can be obtained from Apple Customer service.

Ciao.

29 replies

Oct 12, 2015 8:56 AM in response to ghjorazz

This is the same message that I received . My Thunderbolt port doesn’t work and I did test system for that reason.
MacBook Pro Mid 2010
I was trying to connect My Passport Pro 4TB

Nov 30, 2015 5:53 PM in response to ghjorazz

Same here. MacBook Pro mid-2010. Having problems since Yosemite install a month or two ago. Nothing happens when I try to boot holding down the d key. The system just sits until I release the d key, at which time it reboots in normal mode. Option-d causes the error everyone else is getting here.

Nov 30, 2015 6:06 PM in response to ghjorazz

To use the internet for the apple hardware test, your Mac had to ship with at least Lion. Otherwise you have to have the install dvd that came with the Mac. Not a retail version, but the machine specific software. https://support.apple.com/en-us/HT201257

Feb 4, 2016 10:07 PM in response to ghjorazz

This is straight from someone at Apple, «That -3403D code actually means there was an issue with your Mac software configuration«

Feb 4, 2016 10:29 PM in response to Mammadmo

To all that get that code. It means your Mac cannot do the hardware test from the internet. You need the install disk that has the hardware test on it. Then you boot it and hold down D or Command D at startup.

Feb 5, 2016 8:28 AM in response to my ginger

Very strange i am having the same today? Coincidence?! I am trying internet recovery….

Feb 5, 2016 8:38 AM in response to tsja22

my ginger’s solution is what worked for me. I can’t do internet recovery on my mac—it’s a bit too old. I used the dvd that came with the mac and that worked fine. Showed no hardware errors, but worked. The overall problem I was having was with the video card. Got that replaced and I’m back in business.

Feb 7, 2016 12:09 PM in response to ghjorazz

Created bootable El Capitan USB / Installed fresh version of El Capitan / Restored data with Time Machine / Voila

Feb 25, 2016 11:06 PM in response to ghjorazz

I have this same issue but mine has lines on it won’t let me boot up regarly any more.

Feb 26, 2016 2:46 AM in response to MILLETT117

I first also had trouble. Funny thing was that with the power connected the led in the connector near the laptop was not green or range but not doing anything. Then I disconnected the connector to the white square block (with power still connected) and the led was again green. Very strange! Then the laptop booted and I could do the restore process (Created bootable El Capitan USB / Installed fresh version of El Capitan / Restored data with Time Machine ).

Mar 2, 2016 1:48 AM in response to my ginger

While this may be true, it is odd that the machine appears to attempt to load the hardware test (it goes through all the correct motions before bringing us to the -3404D error). Further, why not simply give a message like, «Sorry, hardware test via the internet is not supported on this Mac,» rather than some unhelpful, cryptic message?

Finally, determining if your computer supports loading Apple Hardware Diagnostics over the internet isn’t necessarily easy to do using the info from Apple. Quoted from their webpage, «Some Macintosh computers that shipped with OS X Lion and later support the use of Apple Hardware Test over the Internet. These computers will start up to an Internet-based version of AHT if the hard drive does not contain AHT.«

Some? How helpful is that? Why don’t we throw in «may» and «possibly» and how about «we don’t really know» for good measure.

I have an early 2011 MBP 13 that does do the AHT over the internet, and a Mid 2010 that doesn’t, so for the 13s that appears to be the cutoff. How hard was that, Apple? FFS

Mar 2, 2016 8:57 AM in response to Hotchili

2010 and older Mac’s that run Snow Leopard or older. Have to use the install disk for AHT. Some 2011 or newer with a smc and efi update can run the online diagnostics. Usually the update is part of a software update. If you have the original install disks, you don’t need internet diagnostics. This is because after Snow Leopard, all operating systems came by way of a download from apple, if not preinstalled. The reinstall and the utilities is on line. The early 2011 that came with Snow Leopard generally can’t use the online diagnostics. As a general rule. If your computer came with Lion or newer, you use the online diagnostics.

Jun 5, 2017 12:41 AM in response to my ginger

HI, I do have the original install disks for my iMac 27-mid 2010 but even so always get the same error message mentioned on this thread (3403D) when I try to run the ADT.

Sep 27, 2017 6:14 AM in response to ghjorazz

I have it too. Using an old (around 2010) and now problematic iMac.

https://support.apple.com/en-us/HT201257

I think in my case, and maybe yours too, this paragraph pertains:

If you’re using OS X Lion v10.7 or earlier and you can’t get AHT to start, see if you have an OS X installation disc named “Applications Install Disc 2.” Insert the disc in your internal optical drive or external Apple SuperDrive before following the steps above. Or, if you’re using a MacBook Air (Late 2010), plug the MacBook Air Software Reinstall thumb drive into your USB port instead.

The problem with my iMac is that the internal optical drive broke very early after purchasing this iMac. Actually it broke in (or around) an earthquake back in 2011 It just won’t swallow any optical disc since.

-3403D error

Источник

Ошибка 3403d на MacBook может возникать по разным причинам и иметь различные последствия. Одной из основных причин может быть проблема с жестким диском или накопителем. Если возникает данная ошибка, рекомендуется проверить и исправить ошибки файловой системы, а также провести диагностику и восстановление накопителя.

Ещё одной возможной причиной ошибки 3403d может быть неисправность компонентов памяти или некорректное их подключение. В таком случае, рекомендуется провести тестирование оперативной памяти и при необходимости заменить неисправные модули.

Иногда ошибка 3403d может быть связана с проблемами в работе операционной системы. В этом случае, попробуйте выполнить резервное копирование данных и переустановить Mac OS. Если ошибка продолжает возникать после переустановки, может потребоваться обращение к сервисному центру Apple для более глубокой диагностики и решения проблемы.

Другие возможные причины ошибки 3403d могут включать проблемы с графическим адаптером, некорректно установленное программное обеспечение или конфликты драйверов. В таких случаях, рекомендуется обновить драйвера и программное обеспечение до последних версий или провести ремонт устройства при необходимости.

Важно понимать, что ошибка 3403d может иметь разные причины и решения, и для точной диагностики и решения проблемы рекомендуется обратиться к официальному сервисному центру Apple или специалистам, знакомым с продукцией и операционной системой компании Apple.

macnotes.ru Error

Диагностика Macbook без сервисного центра

Папка с вопросом на Macbook — Что делать?

Issue with Internet Recovery Mode — Command-Option-R Not Working Right

Исправление ошибки на Mac Air(и тд) Fix error(Сбой установки OS X)

how to fix error 102 on your MacBook Pro. And don’t forget to subscribe

Источник

Автор

Тема: iMac не загружается (Прочитано 10771 раз)

erema

Частый гость

Офлайн

Сообщений: 128

Добрый день.
Дано: iMac 21.5″ Middle 2010, High Sierra.
Где-то 2 недели назад без каких-либо видимых причин перестал загружаться: полоса загрузки доходит до конца и всё, дальше не грузится.

Пробовал:
1. Запустить диагностику — выходит ошибка -3403D
2. Переустановить OS X с загрузочного раздела, всё переустанавливается, доходит до загрузки и снова стопорится в конце полосы загрузки
3. Проверял диск на ошибки — проблем не находит
4. На всякий случай доставал и переставлял/убирал разные модули памяти — ничего не меняется

Установочных дисков нет и дисковод уже давно отказывается какие-либо диски принимать.


« Последнее редактирование: 27 Ноября 2017, 13:42 от erema »	Записан

Legko

Заслуженный участник

Офлайн

Сообщений: 924

Я поменял бы HD. Однако, перед этим установил бы систему на внешний USB-HD. Если с него компьютер грузится — проблема в диске, если та же песня — проблема глубже…


	Записан

erema

Частый гость

Офлайн

Сообщений: 128

Спасибо за предложение, действительно, в таком виде заработал.
Вопрос — каким софтом можно потестировать диск? Доступ к нему есть, Дисковая утилита по прежнему не выявляет ошибок.


	Записан

Legko

Заслуженный участник

Офлайн

Сообщений: 924

не знаю, никогда не делал. Проблема либо в диске, либо в шлейфе. В любом случае надо вскрывать и менять, а там может возникнуть проблема с датчиком температуры… Не люблю iMac.


	Записан

iZoPuH

Deep Moderator
Заслуженный участник

Офлайн

Сообщений: 9548

Восстанавливаю данные с убитых жестких дисков.

WWW
E-mail

victoria из под виндов, есть на образах XPE загружаемых с флешки.


	Записан

|Услужливый дурак хуже врага.|
|Сотрудником DeepArtment (DeepApple) не являюсь и никогда таковым не являлся.|

erema

Частый гость

Офлайн

Сообщений: 128

В общем поменял диск, старый без каких-либо проблем на него склонировался, но грузится по прежнему не хочет.
С внешнего диска чистая система грузится без проблем.
Может быть дело в самой OS X?


	Записан

iZoPuH

Deep Moderator
Заслуженный участник

Офлайн

Сообщений: 9548

Восстанавливаю данные с убитых жестких дисков.

WWW
E-mail

вероятно на старом была ошибка, склонировался вместе с ошибкой — вот и виснет.
загрузитесь с установочной флешки и установите систему поверх имеющейся, пользователи и папки все сохранятся.


	Записан

|Услужливый дурак хуже врага.|
|Сотрудником DeepArtment (DeepApple) не являюсь и никогда таковым не являлся.|

erema

Частый гость

Офлайн

Сообщений: 128

загрузитесь с установочной флешки и установите систему поверх имеющейся, пользователи и папки все сохранятся.

Делал эту операцию изначально. Зависает после 1 перезагрузки во время установки в конце полосы загрузки.


	Записан

Legko

Заслуженный участник

Офлайн

Сообщений: 924

Для чистоты эксперимента я бы старый диск сунул в USB-коробку и попробовал бы с него загрузиться. Если загрузка без проблем, то следующий этап — шлейф жесткого диска…
Ну а систему можно попробовать «родную» установить — как с ней он будет себя вести.


	Записан

erema

Частый гость

Офлайн

Сообщений: 128

Для чистоты эксперимента я бы старый диск сунул в USB-коробку и попробовал бы с него загрузиться. Если загрузка без проблем, то следующий этап — шлейф жесткого диска…

Буквально парой сообщений выше я писал о том, что с внешнего диска система грузится.

Вообще вчера вечером проблему решил — вернул изначальный диск, данные (без бекапа самой системы) скопировал на другой диск, полностью очистил диск и на чистый диск поставил 10.13. Всё работает.
Косяк был в самой системе и при клонировании на другой диск он копировался вместе с ней. Т.е. проблема чисто софтовая.
Из профита: почистил от пыли, заменил дисковод на второй диск через Optibay.


	Записан

Legko

Заслуженный участник

Офлайн

Сообщений: 924

Вообще вчера вечером проблему решил

Ну и славненько.


	Записан

Источник

Содержание

pvlucasz
CoastalOR
Helpful answers
All replies
Question: Q: Error code 3403D on iMac
All replies
Helpful answers

pvlucasz

macrumors newbie

Any help would be greatly appreciated.

943478

CoastalOR

macrumors 68030

2. Shut down your computer. Then, press the power button to turn it back on.

3. Press and hold the D key before the gray startup screen appears.

4. It takes a minute or so for AHT to start up and inspect your hardware configuration.

5. When the process is complete, select your language and click the right arrow. If you aren’t using a mouse, you can use the up and down arrows to select a language and then press the Return key.

7. To exit AHT, click Restart or Shut Down at the bottom of the window.

Источник

Id like to run an Internet AHT (no DVD with me)on my mid-2010 MacBook Pro but this message always appears:

Anyone knows about this error?

Thanks for your help

MacBook Pro (13-inch Mid 2010), OS X Yosemite (10.10)

Posted on Oct 21, 2014 11:48 AM

Helpful answers

Try booting the MBP with the OPTION+D keys. It may work.

If you had the original install DVDs, you would not have this problem. Duplicates can be obtained from Apple Customer service.

Oct 28, 2014 1:33 PM

There’s more to the conversation

Loading page content

Page content loaded

I’m having exactly the same issue with a late 2010 27 inch iMac right now.

EFI firmware is up to to date.

Oct 21, 2014 12:32 PM

Having the same exact issue!

Oct 21, 2014 7:36 PM

Oct 24, 2014 10:02 AM

Same thing, mid-2010 Macbook Pro I just upgraded to Yosemite yesterday. Everything else seems to work fine but I need to do a hardware test and can’t.

Oct 28, 2014 1:27 PM

Try booting the MBP with the OPTION+D keys. It may work.

If you had the original install DVDs, you would not have this problem. Duplicates can be obtained from Apple Customer service.

Oct 28, 2014 1:33 PM

Doesn’t work. That’s where the error message comes from. Pressing D only works if you have the install DVD in the drive, Option + D loads Internet Recovery and is supposed to work as long as you’re connected to a network. Using this option is what’s causing said error message.

Oct 28, 2014 1:44 PM

Stokd is right, the error come with option +D.

Oct 28, 2014 7:45 PM

Same here. would like to run a memory test, with no dvd available.

So used OPTION + D, connected to my wifi. after a few seconds this error appears.

Macbook Pro / 12-2010

Oct 31, 2014 2:43 PM

I’m getting the same error with my 13in Macbook Pro Mid-2010 running Yosemite 10.10.2. I haven’t been able to find any fixes online. Anyone have any ideas?

Mar 10, 2015 8:52 PM

MY MBP was working very well with yosemite (mid 2010 build) until it ‘updated’ last week. Now I can’t even use it without it crashing!! I’m so annoyed. I get the impression that the newer the software & the older the machine, the less likely these two will cooperate together! Are there any clever techies out there who can help diagnose the problem before I wipe the hard drive & re-install from a back up? I’m only glad I have an iPad to use while I’m stuck with this problem! 😠

Источник

Id like to run an Internet AHT (no DVD with me)on my mid-2010 MacBook Pro but this message always appears:

Anyone knows about this error?

Thanks for your help

MacBook Pro (13-inch Mid 2010), OS X Yosemite (10.10)

Posted on Oct 21, 2014 11:48 AM

Try booting the MBP with the OPTION+D keys. It may work.

If you had the original install DVDs, you would not have this problem. Duplicates can be obtained from Apple Customer service.

Oct 28, 2014 1:33 PM

There’s more to the conversation

Loading page content

Page content loaded

Oct 12, 2015 8:56 AM

Nov 30, 2015 5:53 PM

Nov 30, 2015 6:06 PM

Feb 4, 2016 10:07 PM

Feb 4, 2016 10:29 PM

Very strange i am having the same today? Coincidence?! I am trying internet recovery.

Created bootable El Capitan USB / Installed fresh version of El Capitan / Restored data with Time Machine / Voila

Feb 7, 2016 12:09 PM

I have this same issue but mine has lines on it won’t let me boot up regarly any more.

Feb 25, 2016 11:06 PM

I first also had trouble. Funny thing was that with the power connected the led in the connector near the laptop was not green or range but not doing anything. Then I disconnected the connector to the white square block (with power still connected) and the led was again green. Very strange! Then the laptop booted and I could do the restore process ( Created bootable El Capitan USB / Installed fresh version of El Capitan / Restored data with Time Machine ).

Feb 26, 2016 2:46 AM

Finally, determining if your computer supports loading Apple Hardware Diagnostics over the internet isn’t necessarily easy to do using the info from Apple. Quoted from their webpage, » Some Macintosh computers that shipped with OS X Lion and later support the use of Apple Hardware Test over the Internet. These computers will start up to an Internet-based version of AHT if the hard drive does not contain AHT. «

Some? How helpful is that? Why don’t we throw in «may» and «possibly» and how about «we don’t really know» for good measure.

I have an early 2011 MBP 13 that does do the AHT over the internet, and a Mid 2010 that doesn’t, so for the 13s that appears to be the cutoff. How hard was that, Apple? FFS

Источник

Question: Q: Error code 3403D on iMac

iMac 21.5″ Mid-2010 Model 11,2 3.06 GHz Intel Core i3 Yosemite 10.10.5

This thing has been a terrific workhorse for nearly 7 years. Only thing I’ve had done was a new power supply in 2013.

iMac, OS X Yosemite (10.10.5)

Posted on Apr 5, 2017 10:51 AM

Loading page content

Page content loaded

Please post an EtreCheckreport of your system. We can then look for obvious issues. Please click the link, download the app and run the report. Once you have the report, please copy and paste it as your reply to this post.

If you would like more info on what EtreCheck is, simply click the link and you will find a description of the app.

Apr 5, 2017 10:55 AM

EtreCheck version: 3.1.5 (343)

Report generated 2017-04-05 11:09:33

Runtime 3:35

Performance: Good

Click the [Support] links for help with non-Apple products.

Click the [Details] links for more information about that line.

Problem: Other problem

Description:

Hardware Information: ⓘ

iMac (21.5-inch, Mid 2010)

1 3.06 GHz Intel Core i3 (i3) CPU: 2-core

4 GB DDR3 1333 MHz ok

Wireless: en1: 802.11 a/b/g/n

Video Information: ⓘ

System Software: ⓘ

Disk Information: ⓘ

ST3500418AS disk0 : (500.11 GB) (Rotational)

[Show SMART report]

EFI (disk0s1) : 210 MB

Macintosh HD (disk0s2) / [Startup]: 499.25 GB (179.34 GB free)

Recovery HD (disk0s3) [Recovery]: 650 MB

OPTIARC DVD RW AD-5680H ()

USB Information: ⓘ

Apple, Inc. Keyboard Hub

Apple Inc. Apple Keyboard

Apple Inc. BRCM2046 Hub

Apple Inc. Bluetooth USB Host Controller

Apple Internal Memory Card Reader

LaCie LaCie Device 640.14 GB

disk1s1 (disk1s1) : 32 KB

La Cie (disk1s3) /Volumes/La Cie 2 : 640.00 GB (49.06 GB free)

Apple Computer, Inc. IR Receiver

Apple Inc. Built-in iSight

Configuration files: ⓘ

/etc/sudoers, File size 2299 but expected 1275

Gatekeeper: ⓘ

Mac App Store and identified developers

Kernel Extensions: ⓘ

/Library/StartupItems/BRESINKx86Monitoring

System Launch Agents: ⓘ

[not loaded] 5 Apple tasks

[loaded] 145 Apple tasks

[running] 62 Apple tasks

System Launch Daemons: ⓘ

[not loaded] 47 Apple tasks

[loaded] 134 Apple tasks

[running] 81 Apple tasks

Launch Agents: ⓘ

[not loaded] com.adobe.AAM.Updater-1.0.plist (2014-05-05) [Support]

[failed] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a725c38014c95072f92651fb65e1bf9c8e43c37a2 3d420d.plist (2017-01-10) [Support]

[running] com.brother.LOGINserver.plist (2016-11-27) [Support]

[loaded] com.google.keystone.agent.plist (2017-01-13) [Support]

Launch Daemons: ⓘ

[loaded] com.adobe.ARMDC.Communicator.plist (2017-01-10) [Support]

[loaded] com.adobe.ARMDC.SMJobBlessHelper.plist (2017-01-10) [Support]

[loaded] com.adobe.fpsaud.plist (2017-02-28) [Support]

[running] com.easeus.dataprotectbackup.plist (2016-11-07) [Support]

[loaded] com.google.keystone.daemon.plist (2017-01-23) [Support]

[loaded] com.microsoft.autoupdate.helper.plist (2017-02-12) [Support]

[loaded] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

[loaded] com.tclementdev.timemachineeditor.scheduler.plist (2016-11-04) [Support]

User Launch Agents: ⓘ

[loaded] com.adobe.AAM.Updater-1.0.plist (2014-11-01) [Support]

[running] com.amazon.music.plist (2015-05-10) [Support]

[loaded] com.divx.agent.postinstall.plist (2012-01-16) [Support]

[loaded] com.wondershare.mobilegodaemon.plist (2015-03-29) [Support]

[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist (2010-03-29) [Support]

[loaded] uk.co.canimaansoftware.clamxav.clamscan.plist (2016-04-23) [Support]

[loaded] uk.co.canimaansoftware.clamxav.freshclam.plist (2016-04-23) [Support]

User Login Items: ⓘ

ClamXav Sentry Application

Microsoft Database Daemon Application

(/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app)

BOINCManager Application Hidden

Internet Plug-ins: ⓘ

QuickTime Plugin: 7.7.3 (2016-12-13)

iPhotoPhotocast: 7.0 (2010-09-03)

User internet Plug-ins: ⓘ

CitrixOnlineWebDeploymentPlugin: 1.0.105 (2013-04-25) [Support]

Safari Extensions: ⓘ

3rd Party Preference Panes: ⓘ

Time Machine: ⓘ

Skip System Files: NO

Mobile backups: OFF

Volumes being backed up:

Macintosh HD: Disk size: 499.25 GB Disk used: 319.91 GB

Total number of backups: 18

Oldest backup: 1/3/16, 4:35 PM

Last backup: 12/18/16, 8:21 AM

Size of backup disk: Too small

Top Processes by Memory: ⓘ

1.30 GB Google Chrome Helper(7)

986 MB kernel_task

229 MB Google Chrome

Virtual Memory Information: ⓘ

11.72 GB Available RAM

3.09 GB Cached files

Diagnostics Information: ⓘ

Источник

I want to perform an Apple Hardware Test. I restarted, pressed option+D, and a globe appeared. After a minute, however, the following text appeared:

MacBook Pro (15-inch Mid 2010), OS X Yosemite (10.10.2), 2.53 GHz i5, 4 GB RAM

Posted on Mar 11, 2015 2:51 AM

Helpful answers

I experience frequent crashes with » GPUPanic.cpp:127 » in the crash log. There is a problem related to switching between the internal Intel graphics and the Nvidia graphics. I have spoken to the local Apple retailer, which will repair the computer free of charge soon.

Mar 23, 2015 12:16 AM

There’s more to the conversation

Loading page content

Page content loaded

Have you found out any more information? I have this same MacBook and am experiencing this same error when trying to run diagnostics. I purchased mine recently from Mac of All Trades.

Mar 19, 2015 5:37 AM

Mar 23, 2015 12:16 AM

Your Macbook Pro came with OS X 10.6.x and to run Apple Hardware Test you can use bundled with your Macbook Pro Application Disc:

Your Macbook Pro probably was upgraded to use OS X Internet Recovery as some of the Mac which came with 10.6.x did have that option. It seems like, some of the models might have problem to access Internet AHT:

Источник

Содержание

Apple HW Test error code -3403d
pvlucasz
CoastalOR
Question: Q: -3403D error
All replies
Question: Q: Error code 3403D on iMac
All replies

Apple HW Test error code -3403d

pvlucasz

macrumors newbie

Any help would be greatly appreciated.

CoastalOR

macrumors 68030

2. Shut down your computer. Then, press the power button to turn it back on.

3. Press and hold the D key before the gray startup screen appears.

4. It takes a minute or so for AHT to start up and inspect your hardware configuration.

5. When the process is complete, select your language and click the right arrow. If you aren’t using a mouse, you can use the up and down arrows to select a language and then press the Return key.

7. To exit AHT, click Restart or Shut Down at the bottom of the window.

Источник

Question: Q: -3403D error

Id like to run an Internet AHT (no DVD with me)on my mid-2010 MacBook Pro but this message always appears:

Anyone knows about this error?

Thanks for your help

MacBook Pro (13-inch Mid 2010), OS X Yosemite (10.10)

Posted on Oct 21, 2014 11:48 AM

Try booting the MBP with the OPTION+D keys. It may work.

If you had the original install DVDs, you would not have this problem. Duplicates can be obtained from Apple Customer service.

Oct 28, 2014 1:33 PM

There’s more to the conversation

Loading page content

Page content loaded

This is the same message that I received . My Thunderbolt port doesn’t work and I did test system for that reason.
MacBook Pro Mid 2010
I was trying to connect My Passport Pro 4TB

Oct 12, 2015 8:56 AM

Nov 30, 2015 5:53 PM

Nov 30, 2015 6:06 PM

This is straight from someone at Apple, » That -3403D code actually means there was an issue with your Mac software configuration «

Feb 4, 2016 10:07 PM

Feb 4, 2016 10:29 PM

Very strange i am having the same today? Coincidence?! I am trying internet recovery.

Feb 5, 2016 8:28 AM

Feb 5, 2016 8:38 AM

Created bootable El Capitan USB / Installed fresh version of El Capitan / Restored data with Time Machine / Voila

Feb 7, 2016 12:09 PM

I have this same issue but mine has lines on it won’t let me boot up regarly any more.

Feb 25, 2016 11:06 PM

I first also had trouble. Funny thing was that with the power connected the led in the connector near the laptop was not green or range but not doing anything. Then I disconnected the connector to the white square block (with power still connected) and the led was again green. Very strange! Then the laptop booted and I could do the restore process ( Created bootable El Capitan USB / Installed fresh version of El Capitan / Restored data with Time Machine ).

Feb 26, 2016 2:46 AM

Finally, determining if your computer supports loading Apple Hardware Diagnostics over the internet isn’t necessarily easy to do using the info from Apple. Quoted from their webpage, » Some Macintosh computers that shipped with OS X Lion and later support the use of Apple Hardware Test over the Internet. These computers will start up to an Internet-based version of AHT if the hard drive does not contain AHT. «

Some? How helpful is that? Why don’t we throw in «may» and «possibly» and how about «we don’t really know» for good measure.

I have an early 2011 MBP 13 that does do the AHT over the internet, and a Mid 2010 that doesn’t, so for the 13s that appears to be the cutoff. How hard was that, Apple? FFS

Mar 2, 2016 1:48 AM

Mar 2, 2016 8:57 AM

HI, I do have the original install disks for my iMac 27-mid 2010 but even so always get the same error message mentioned on this thread (3403D) when I try to run the ADT.

Jun 5, 2017 12:41 AM

I have it too. Using an old (around 2010) and now problematic iMac.

I think in my case, and maybe yours too, this paragraph pertains:

If you’re using OS X Lion v10.7 or earlier and you can’t get AHT to start, see if you have an OS X installation disc named “Applications Install Disc 2.” Insert the disc in your internal optical drive or external Apple SuperDrive before following the steps above. Or, if you’re using a MacBook Air (Late 2010), plug the MacBook Air Software Reinstall thumb drive into your USB port instead.

The problem with my iMac is that the internal optical drive broke very early after purchasing this iMac. Actually it broke in (or around) an earthquake back in 2011 😛 It just won’t swallow any optical disc since.

Источник

Question: Q: Error code 3403D on iMac

iMac 21.5″ Mid-2010 Model 11,2 3.06 GHz Intel Core i3 Yosemite 10.10.5

This thing has been a terrific workhorse for nearly 7 years. Only thing I’ve had done was a new power supply in 2013.

It’s freezing intermittently — I can move the cursor but that’s all — it doesn’t activate anything. I have to restart.

So I tried to run AHT but it won’t run. Tried to run it from the internet (Command D) but again no luck — except this time it gave me that error message. Does anybody know what it means? And what I should do about it — and about the freezing?

iMac, OS X Yosemite (10.10.5)

Posted on Apr 5, 2017 10:51 AM

Loading page content

Page content loaded

If you would like more info on what EtreCheck is, simply click the link and you will find a description of the app.

Apr 5, 2017 10:55 AM

EtreCheck version: 3.1.5 (343)

Report generated 2017-04-05 11:09:33

Runtime 3:35

Performance: Good

Click the [Support] links for help with non-Apple products.

Click the [Details] links for more information about that line.

Problem: Other problem

Description:

freezing requiring manual restart, and when I try to run AHT I get error code -3403D

Hardware Information: ⓘ

iMac (21.5-inch, Mid 2010)

iMac — model: iMac11,2

1 3.06 GHz Intel Core i3 (i3) CPU: 2-core

4 GB DDR3 1333 MHz ok

Bluetooth: Old — Handoff/Airdrop2 not supported

Wireless: en1: 802.11 a/b/g/n

Video Information: ⓘ

ATI Radeon HD 4670 — VRAM: 256 MB

iMac 1920 x 1080

System Software: ⓘ

OS X Yosemite 10.10.5 (14F2109) — Time since boot: less than an hour

Disk Information: ⓘ

ST3500418AS disk0 : (500.11 GB) (Rotational)

[Show SMART report]

EFI (disk0s1) : 210 MB

Macintosh HD (disk0s2) / [Startup]: 499.25 GB (179.34 GB free)

Recovery HD (disk0s3) [Recovery]: 650 MB

OPTIARC DVD RW AD-5680H ()

USB Information: ⓘ

Apple, Inc. Keyboard Hub

Apple Inc. Apple Keyboard

Apple Inc. BRCM2046 Hub

Apple Inc. Bluetooth USB Host Controller

Apple Internal Memory Card Reader

LaCie LaCie Device 640.14 GB

disk1s1 (disk1s1) : 32 KB

La Cie (disk1s3) /Volumes/La Cie 2 : 640.00 GB (49.06 GB free)

Apple Computer, Inc. IR Receiver

Apple Inc. Built-in iSight

Configuration files: ⓘ

/etc/sudoers, File size 2299 but expected 1275

Gatekeeper: ⓘ

Mac App Store and identified developers

Kernel Extensions: ⓘ

/Library/StartupItems/BRESINKx86Monitoring

[not loaded] com.bresink.driver.BRESINKx86Monitoring (8.0 — 2012-03-31) [Support]