103 ошибка паскаль

Step 1 – Solve Pascal Error Code 103

Is Pascal Error Code 103 appearing? Would you like to safely and quickly eliminate Pascal Error Code which additionally can lead to a blue screen of death?

When you manually edit your Windows Registry trying to take away the invalid runtime error 103 pascal keys you’re taking a authentic chance. Unless you’ve got been adequately trained and experienced you’re in danger of disabling your computer system from working at all. You could bring about irreversible injury to your whole operating system. As very little as just 1 misplaced comma can preserve your Pc from even booting every one of the way by!

Troubleshooting exit code 103 pascal Windows XP, Vista, 7, 8 & 10

Simply because this chance is so higher, we hugely suggest that you make use of a trusted registry cleaner plan like CCleaner (Microsoft Gold Partner Licensed). This system will scan and then fix any Pascal Error Code 103 complications.

Registry cleaners automate the entire procedure of finding invalid registry entries and missing file references (including the 103 error) likewise as any broken hyperlinks inside of your registry.

Issue with pascal error while linking

Backups are made immediately prior to each and every scan providing you with the choice of undoing any changes with just one click. This protects you against doable damaging your pc. Another advantage to these registry cleaners is that repaired registry errors will strengthen the speed and performance of one’s procedure drastically.

  • http://forum.lazarus.freepascal.org/index.php?topic=14437.0
  • http://www.programmersheaven.com/discussion/52902/pascal-run-time-error-103-cannot
  • http://www.frameworkpascal.com/helphtml/run_errors.htm
  • https://there10han.wordpress.com/programming/pascal/free-pascal-exitcoderuntime-error-code/

Cautionary Note: Yet again, for those who are not an state-of-the-art consumer it’s very encouraged that you simply refrain from editing your Windows Registry manually. If you make even the smallest error within the Registry Editor it can result in you some serious issues that may even call for a brand new set up of Windows. Not all difficulties attributable to incorrect Registry Editor use are solvable.

Fixed: pascal error 26 type mismatch

Symptoms of Pascal Error Code 103
“Pascal Error Code 103” appears and crashes the energetic method window.
Your Personal computer routinely crashes with Pascal Error Code 103 when running the exact same system.
“Pascal Error Code 103” is shown.
Windows operates sluggishly and responds little by little to mouse or keyboard input.
Your computer periodically “freezes” for the number of seconds in a time.

Will cause of Pascal Error Code 103

Corrupt obtain or incomplete set up of Windows Operating System software program.

Corruption in Windows registry from a new Windows Operating System-related application adjust (install or uninstall).

Virus or malware infection which has corrupted Windows method documents or Windows Operating System-related application data files.

Another method maliciously or mistakenly deleted Windows Operating System-related files.

Mistakes this sort of as “Pascal Error Code 103” can be brought about by several different elements, so it really is important that you troubleshoot every of the achievable brings about to forestall it from recurring.

Simply click the beginning button.
Variety “command” inside the lookup box… Will not hit ENTER nonetheless!
Although keeping CTRL-Shift in your keyboard, hit ENTER.
You’re going to be prompted that has a authorization dialog box.
Click on Of course.
A black box will open having a blinking cursor.
Variety “regedit” and hit ENTER.
Within the Registry Editor, choose the runtime error 103 pascal connected key (eg. Windows Operating System) you wish to back again up.
Within the File menu, choose Export.
Inside the Preserve In list, pick out the folder in which you wish to save the Windows Operating System backup key.
Inside the File Title box, sort a reputation for the backup file, these types of as “Windows Operating System Backup”.
From the Export Vary box, ensure that “Selected branch” is selected.
Click on Help you save.
The file is then saved by using a .reg file extension.
You now use a backup within your exit code 103 pascal related registry entry.

Solution to your pascal error operator is not overloaded problem

There are actually some manual registry editing measures that can not be talked about in this article due to the high chance involved for your laptop or computer method. If you want to understand more then check out the links below.

Additional Measures:

One. Conduct a Thorough Malware Scan

There’s a probability the 103 Error Pascal Code error is relevant to some variety of walware infection. These infections are malicious and ready to corrupt or damage and possibly even delete your ActiveX Control Error files. Also, it’s attainable that your Pascal Error Code 103 is actually connected to some element of that malicious plan itself.

2. Clean pascal error 85 Disk Cleanup

The a lot more you employ your computer the extra it accumulates junk files. This comes from surfing, downloading packages, and any sort of usual computer system use. When you don’t clean the junk out occasionally and keep your program clean, it could turn into clogged and respond slowly. That is when you can encounter an Code error because of possible conflicts or from overloading your hard drive.

Once you clean up these types of files using Disk Cleanup it could not just remedy Pascal Error Code 103, but could also create a dramatic change in the computer’s efficiency.

Tip: While ‘Disk Cleanup’ is definitely an excellent built-in tool, it even now will not completely clean up Pascal Error discovered on your PC. There are numerous programs like Chrome, Firefox, Microsoft Office and more, that cannot be cleaned with ‘Disk Cleanup’.

Since the Disk Cleanup on Windows has its shortcomings it is extremely encouraged that you use a specialized sort of challenging drive cleanup and privacy safety application like CCleaner. This system can clean up your full pc. If you run this plan after each day (it could be set up to run instantly) you are able to be assured that your Pc is generally clean, often operating speedy, and always absolutely free of any Code error associated with your temporary files.

How Disk Cleanup can help pascal error 105

1. Click your ‘Start’ Button.
2. Style ‘Command’ into your search box. (no ‘enter’ yet)
3. When holding down in your ‘CTRL-SHIFT’ important go ahead and hit ‘Enter’.
4. You will see a ‘permission dialogue’ box.
5. Click ‘Yes’
6. You will see a black box open up plus a blinking cursor.
7. Variety in ‘cleanmgr’. Hit ‘Enter’.
8. Now Disk Cleanup will start calculating the amount of occupied disk space you will be able to reclaim.
9. Now a ‘Disk Cleanup dialogue box’ seems. There will be a series of checkboxes for you personally to pick. Generally it will likely be the ‘Temporary Files’ that consider up the vast majority of your disk area.
10. Verify the boxes that you want cleaned. Click ‘OK’.

How to repair pascal error 113

3. System Restore can also be a worthwhile device if you ever get stuck and just desire to get back to a time when your computer system was working ideal. It will work without affecting your pics, paperwork, or other crucial information. You can discover this option with your User interface.

Pascal Error

Manufacturer

Device

Operating System


Pascal Error Code 103


4 out of
5

based on
48 ratings.

 

Источник

Модератор: Модераторы

Error 103

После компилирования при запуске возникает ошибка:
Runtime error 103 at <адрес>
В программе нету работы с файлами.
Есть только обращение к таким процедурам
WRITEln(‘N=’);
READLN(N);
READLN;
В ошибке указан номер строчки , которой соответствует WRITEln(‘N=’);

Компилирую из командной строки(.bat фай) такого содержания
\fpW\bin\win32\ppc386 -Sd -Sg -Un -O1 -Xs -gl %1
Компилятор версии 1.0.10 [2003/06/27].
Также пробовал версию 2.4.4 [2011/04/23]. При компилировании из командной строки ошибка таже самая,
а вот при компилировании из-под оболочки fp.exe всё компилируется и запускается без ошибок.

В чем может быт причина возникновения такой ошибки 103 и как ее устранить?

Mavlyudov
новенький
 
Сообщения: 50
Зарегистрирован: 24.01.2010 20:35:23

Re: Error 103

Сообщение Сквозняк » 12.12.2011 04:48:52

Многие процедуры паскаля, в частности writeln, на нём не реализованы а представляют собой обёртку к системным функциям написанным на языке C. То есть, если очень постараться, можно словить баги этого языка. Попробуй компилировать из коммандной строки не компилятором ppc386 а более для этого предназначенным fpc и без опций. Если заработает, то компилируй снова и добавляй каждый раз по одной новой опции, так ты узнаешь, какая из них вызывает ошибку. Если не поможет, то пример кода вызвающий ошибку в студию :D

Сквозняк
энтузиаст
 
Сообщения: 1085
Зарегистрирован: 29.06.2006 22:08:32

Re: Error 103

Сообщение Sergei I. Gorelkin » 12.12.2011 08:45:06

Скорее всего не хватает ключа -Wg или директивы {$apptype console} в начале программы.

Аватара пользователя
Sergei I. Gorelkin
энтузиаст
 
Сообщения: 1392
Зарегистрирован: 24.07.2005 14:40:41
Откуда: Зеленоград
  • Профиль
  • ICQ

Re: Error 103

Сообщение Mavlyudov » 13.12.2011 03:12:11

Сквозняк
Я предполагал, что fpc (или fp) использует ppc386 при компиляции, поэтому искал файл настроек с директивами, которые можно прописать и в командной строке. Как оказалось, fp и ppc386 — два независимых приложения.
Sergei I. Gorelkin
Видимо, речь все таки идет о ключе ключе -WС. Да, теперь компилируется.
Но при компиляции компилером версии 1.0.10 возникла другая ошибка 203. Переполнение кучи.
Runtime error 203 at адрес
и еще несколько адресов ниже
указана строка с кодом GetMem(ARRM[I], sizeof(ARRM[I]^));
При использовании компилятора версии 2.4.4 такой ошибки не возникает. Но нужно разобраться именно с ошибкой компилятора более ранней версии.
Компилирую как и раньше командной строкой через ppc386.
Настройки .bat файла:
\FPC\2.4.4\bin\i386-win32\ppc386 -Sd -Sg -Un -O1 -Xs -gl %1 -FU<директория модулей> -Foc:<директория модулей> -WC -WN

При запуске программы предполагается ввод большого числа(например, 20000), так чтобы выполнилась часть кода в except.

Вот код:

Код: Выделить всё
program Project4;

//uses Windows, SysUtils, dos;
{ H+}
{ mode Delphi}
{ apptype console}

const
  NNMAT=30000;{8100;}{4096;}{16380;}
  NNARR=30000;

type
  MAS = array [0..NNMAT-1] of Double;
  ARR = ^MAS;
  MAS2 = array [0..NNARR] of ARR;
  PMAS2 = ^MAS2;

var {-------------------------------}
  NMAT0, NMAT: INTEGER;
  ARRM: array [0..NNARR] of ARR;
  ARR0: ARR;
  GE:DWORD;

procedure MAT_PRED(N:INTEGER);
var
  NN, I: LONGINT;
begin
  NN:= SQR(N);
  I:= 0;
  NMAT:= 0;

  while (NMAT < NN) AND (I < NNARR) DO
  begin
    try
      GetMem(ARRM[I], sizeof(ARRM[I]^));
      //sizeof(Double)*NNMAT
    except
      Writeln('It was GOTO',#$20,I,#$20,NMAT);
      Dec(NMAT);
    end;
    Inc(I);
    Inc(NMAT, NNMAT);
//    writeln(I,' ',NMAT,' '{,MEMAVAIL,' ',MAXAVAIL});
  end;
NMAT0:= NMAT;
Writeln(I,' ',NMAT0);
end;{MAT_PRED}

var
  N: INTEGER;
begin
  WRITEln('N=');
  READLN(N);
  MAT_PRED(N);
  WRITELN('Filled Memory: ',SQRT(NMAT0):9:3);
  READLN;
end.

Mavlyudov
новенький
 
Сообщения: 50
Зарегистрирован: 24.01.2010 20:35:23

Re: Error 103

Сообщение Сквозняк » 13.12.2011 06:54:25

Код: Выделить всё
{$mode Delphi}

Без значка $ мой компилятор директиву не принимает.
Используя ppc386 напрямую, ты без пользы ломаешь кроссплатформенность своего скрипта — в каждой платформе этот компилятор называется по разному.

Сквозняк
энтузиаст
 
Сообщения: 1085
Зарегистрирован: 29.06.2006 22:08:32

Re: Error 103

Сообщение Mavlyudov » 14.12.2011 01:45:22

Сквозняк
У меня без $, т.к. закомментированы. Все режимы выставлены через командную строку в ключах.
Вопрос не в кроссплатформенности, а в том, как отладить приведенный код

Mavlyudov
новенький
 
Сообщения: 50
Зарегистрирован: 24.01.2010 20:35:23

Re: Error 103

Сообщение Sergei I. Gorelkin » 14.12.2011 14:15:28

Исключения обрабатываются только при подключенном модуле sysutils. Если он закомментарен, то вылет с runtime error — нормальное поведение.

Аватара пользователя
Sergei I. Gorelkin
энтузиаст
 
Сообщения: 1392
Зарегистрирован: 24.07.2005 14:40:41
Откуда: Зеленоград
  • Профиль
  • ICQ

Вернуться в Free Pascal Compiler

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 6

Источник

: : — TP 6.0 Program generates the Error 103 (FIle not Open)
: : — Error 103 generated after a simple ‘WRITELN;’ statement which is supposed to put an empty line on the screen. This occurs right after the start of the program.
: :
: :
: : — error occurs only on: i) old 286 IBM AT and ii) Pentium I (90 MHz) computer
: : — earlier versions of same program ran smoothly
: :
: : — the error does not occur on my Pentium-II 350 MHz computer on which the programming is done
:
: as best i know, the error «file not open» is only when you do something like: [code]
: write(f,’….’);
:
: [/code]
: where f is a var of any file type, or specifically [italic]writeln()[/italic] for text, and you didn’t [italic]append()[/italic] or [italic]rewrite()[/italic] the file.. or if you already [italic]close()[/italic]ed the file..
:
: but that will happen on all computers, and all tp/other compiler versions which support file i/o (which should be all) (if it does not support that, it won’t recognize the code..)
:
: try finding TP7 is basically what i’d suggest.. i don’t have a 286 or a p1/90 and i dont’ have problems on my p3/450..
:
: //Noam
:

There is away of handling this….

I had just recently had to do this re opening a file…

Like write(‘Enter file name :);
readln(filename);

{I+} {Note this is used, it overrides the dos error interruption program}

assgin(f,{the location of file ie c:tpin));
reset(f);

{I-} {Restores dos error handling}

if {I am not sure of the name here} errorresult then
writeln(‘File not found.’);
else
writeln(‘File found.’);

The above errorresult returns a value and U then have contorl of what is happening.

I shall go home and check this variable name and report it back to you..

Michael

Источник

>
Exit code=103
, Где ошибка?

  • Подписаться на тему
  • Сообщить другу
  • Скачать/распечатать тему



Сообщ.
#1

,

    Senior Member

    ****

    Рейтинг (т): 13

    ExpandedWrap disabled

      Program GamersCreate;

      Uses Crt;

      Type AlliansGamers = Record

                           Nik : string[25];

                           x,y : array[1..15] of Byte;

                           end;

      Var SIn,Sn,Sx,Sy : String;

          FIn : Text;

          FOut : file of AlliansGamers;

          AV : AlliansGamers;

          step,j,ni,Code : Integer;

      Begin

      ClrScr;

      Write(‘ Введите название файла (без расширения): ‘);

      ReadLn(SIn);

      Assign(FIn,SIn+’.txt’);

      Reset(FIn);

      Assign(FOut,SIn+’.als’);

      ReWrite(FOut);

      step:=1;

      Repeat

      Case step of

      1 : begin

          If Not Eof(FIn) then begin

                               Close(FIn);

                               Close(FOut);

                               end

                          else begin

                               ReadLn(FIn,SIn);

                               step:=2;

                               end;

          end;

      2 : begin

          For j:=1 to 15 do begin

                            AV.x[j]:=0;

                            AV.y[j]:=0;

                            end;

          j:=0;

          ni:=Pos(‘#’,SIn);

          If ni=0 then step:=1

                  else begin

                       Inc(ni);

                       step:=3;

                       end;

          end;

      3 : begin

          If SIn[ni]=’ ‘ then If SIn[ni+1]=’ ‘ then begin

                                                    step:=5;

                                                    AV.Nik:=Sn;

                                                    end

                                                    else step:=4

                         else step:=4;

          end;

      4 : begin

          Sn:=Sn+SIn[ni];

          Inc(ni);

          step:=3;

          end;

      5 : begin

          If Not Eof(FIn) then begin

                               Close(FIn);

                               Close(FOut);

                               end

                  else begin

                               Sx:=»;

                               Sy:=»;

                               ReadLn(FIn);

                               ni:=Pos(‘[‘,SIn);

                               If ni=0 then If (Pos(‘#’,SIn)>0) then begin

                                                                     Write(FOut,AV);

                                                                     step:=2;

                                                                     end

                                                                else step:=5

                                       else begin

                                            Inc(ni);

                                            step:=6;

                                            end;

                               end;

          end;

      6 : begin

          If SIn[ni]=’:’ then begin

                              Inc(ni);

                              step:=7;

                              end

                         else begin

                              Sx:=Sx+SIn[ni];

                              Inc(ni);

                              step:=6;

                              end;

          end;

      7 : begin

          If SIn[ni]=’]’ then begin

                              Inc(j);

                              Val(Sx,AV.x[j],Code);

                              Val(Sy,AV.y[j],Code);

                              step:=5;

                              end

                              else begin

                              Sy:=Sy+SIn[ni];

                              Inc(ni);

                              step:=7;

                              end;

          end;

      end;

      Until False;

      End.

    Программа компилируется, запускается. Сразу после ввода имени файла программа вылетает, IDE показывает ошибку 103. Что не так в программе?

    Нашел текст ошибки:
    103 File not open Reported by the following functions : Close, Read, Write, Seek, EOf,
    FilePos, FileSize, Flush, BlockRead, and BlockWrite if the file is not open.

    Но не могу понять где и почему происходит ошибка.

    ОС: Windows XP
    IDE: FPC 2.2.2

    Guru

    volvo877



    Сообщ.
    #2

    ,

      Moderator

      *******

      Рейтинг (т): 878

      Цитата Polinom2686 @

      Но не могу понять где и почему происходит ошибка.

      Файл с введенным_именем.TXT в текущей папке присутствует? Тогда присоедини его тоже сюда (в архиве, чтоб можно было посмотреть, где именно у тебя вылетает программа). У меня с пустым файлом она просто зависает, а не вылетает.


      Polinom2686



      Сообщ.
      #3

      ,

        Senior Member

        ****

        Рейтинг (т): 13

        Программа должна разобрать этот файл.

        Добавлено
        Вообще задача такая: в файле находится список альянса, который содержит ник игрока и название его городов и координат островов. Надо разобрать этот файл, т.е. вытащить из него ники игроков и координаты островов для каждого игрока, и сохранить данные в типизированный файл.

        Прикреплённый файлПрикреплённый файл1.zip (15.65 Кбайт, скачиваний: 188)

        Polinom2686



        Сообщ.
        #4

        ,

          Senior Member

          ****

          Рейтинг (т): 13

          Guru

          volvo877



          Сообщ.
          #5

          ,

            Moderator

            *******

            Рейтинг (т): 878

            Ошибка здесь:

            ExpandedWrap disabled

              Repeat

              Case step of

              1 : begin

                  If Not Eof(FIn) then begin

                                       Close(FIn); // <—

                                       Close(FOut);

                                       end

              …

            Смотри: ты при первом заходе в Case имеешь step = 1, конец файла НЕ достигнут, и ты файл закрыл… Что дальше? Что изменилось? Ничего, step все так же = 1, файл закрыт, попытка применить EOF к закрытому файлу приводит к тому, что ты видишь… Там точно нужен NOT?


            Polinom2686



            Сообщ.
            #6

            ,

              Senior Member

              ****

              Рейтинг (т): 13

              Спасибо, я сейчас посмотрю у себя в алгоритме.

              Добавлено
              Да, действительно Not лишний.
              Спасибо. +1

              0 пользователей читают эту тему (0 гостей и 0 скрытых пользователей)

              0 пользователей:

              • Предыдущая тема
              • 32-битные компиляторы
              • Следующая тема

              [ Script execution time: 0,0299 ]   [ 16 queries used ]   [ Generated: 21.09.23, 04:48 GMT ]  

              Источник

              El petyx

              0 / 0 / 0

              Регистрация: 24.05.2017

              Сообщений: 4

              1

              14.06.2017, 13:52. Показов 9565. Ответов 3

              Метки нет (Все метки)

              Студворк — интернет-сервис помощи студентам

              Здравствуйте. После попытки чтения выдается ошибка runerror 103. Что нужно исправить?

              Pascal 
              1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53

              procedure TForm1.Button3Click(Sender: TObject);
var
f:file;
s:file;
i,j,p:integer;
begin
Assignfile(f,'source.dat');
ReWrite(f,1);
for i:=1 to stringgrid1.RowCount do
 for j:=1 to stringgrid1.ColCount do
 begin
 p:=strtoint(stringgrid1.cells[j-1,i-1]);
 blockwrite(f,p,sizeof(p));
end;
CloseFile(f);
AssignFile(s,'size.dat');
ReWrite(s,1);
blockwrite(s,stringgrid1.RowCount,sizeof(stringgrid1.RowCount));
blockwrite(s,stringgrid1.ColCount,sizeof(stringgrid1.ColCount));
CloseFile(s);
end;
 
procedure TForm1.Button4Click(Sender: TObject);
var
f:file;
s:file;
i,j,p,y:integer;
si: array [1..2] of integer;
begin
AssignFile(s,'size.dat');
Reset(s,1);
for i:=1 to 2 do begin
    BlockRead(f,p,sizeof(p));
    si[i]:=p;
    end;
CloseFile(s);
StringGrid2.RowCount:=si[1];
StringGrid2.ColCount:=si[2];
 
AssignFile(f,'source.dat');
Reset(f,1);
 
{while not Eof(f) do
begin
   for i:=1 to StringGrid2.RowCount do
            for j:=1 to StringGrid2.ColCount do
                begin
                   BlockRead(f,p,sizeof(p));
                   StringGrid2.Cells[i-1,j-1]:=IntToStr(p);
                end;  
CloseFile(f);
end;
end;

              0

              Супер-модератор

              Эксперт Pascal/DelphiАвтор FAQ

              32505 / 20989 / 8117

              Регистрация: 22.10.2011

              Сообщений: 36,260

              Записей в блоге: 7

              14.06.2017, 14:41

              2

              Открываешь файл через переменную s (31-я строка), а читаешь через переменную f (33-я строка). Издержки копи-пасты?

              0

              El petyx

              0 / 0 / 0

              Регистрация: 24.05.2017

              Сообщений: 4

              15.06.2017, 07:39

               [ТС]

              3

              Не, издержки криворукости. Вот, подправил, но ошибка (103) таже появляется, а именно в строке 43

              Pascal 
              1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53

              procedure TForm1.Button3Click(Sender: TObject);
var
f:file;
s:file;
i,j,p:integer;
begin
Assignfile(f,'source.dat');
ReWrite(f,1);
for i:=1 to stringgrid1.RowCount do
 for j:=1 to stringgrid1.ColCount do
 begin
 p:=strtoint(stringgrid1.cells[j-1,i-1]);
 blockwrite(f,p,sizeof(p));
end;
CloseFile(f);
AssignFile(s,'size.dat');
ReWrite(s,1);
blockwrite(s,stringgrid1.RowCount,sizeof(stringgrid1.RowCount));
blockwrite(s,stringgrid1.ColCount,sizeof(stringgrid1.ColCount));
CloseFile(s);
end;
 
procedure TForm1.Button4Click(Sender: TObject);
var
f:file;
s:file;
i,j,p,y:integer;
si: array [1..2] of integer;
begin
AssignFile(s,'size.dat');
Reset(s,1);
for i:=1 to 2 do begin
    BlockRead(s,p,sizeof(p));
    si[i]:=p;
    end;
CloseFile(s);
StringGrid2.RowCount:=si[1];
StringGrid2.ColCount:=si[2];
 
AssignFile(f,'source.dat');
Reset(f,1);
 
while not Eof(f) do
begin
   for i:=1 to StringGrid2.ColCount do
            for j:=1 to StringGrid2.RowCount do
                begin
                   BlockRead(f,p,sizeof(p));
                   StringGrid2.Cells[i-1,j-1]:=IntToStr(p);
                end;
CloseFile(f);
end;
end;

              0

              volvo

              Супер-модератор

              Эксперт Pascal/DelphiАвтор FAQ

              32505 / 20989 / 8117

              Регистрация: 22.10.2011

              Сообщений: 36,260

              Записей в блоге: 7

              15.06.2017, 09:22

              4

              Лучший ответ Сообщение было отмечено volvo как решение

              Решение

              Цикл while не нужен, из файла и так прочитается столько значений, сколько туда было записано:

              Pascal 
              1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32

              procedure TForm1.Button4Click(Sender: TObject);
var
  f: file;
  s: file;
  i, j, p, y: integer;
  si: array [1..2] of integer;
begin
  AssignFile(s, 'size.dat');
  Reset(s, 1);
  for i := 1 to 2 do
  begin
    BlockRead(s, p, sizeof(p));
    si[i] := p;
  end;
  CloseFile(s);
  StringGrid2.RowCount := si[1];
  StringGrid2.ColCount := si[2];
 
  AssignFile(f, 'source.dat');
  Reset(f, 1);
 
  //while not EOF(f) do
  //begin
    for i := 1 to StringGrid2.ColCount do
      for j := 1 to StringGrid2.RowCount do
      begin
        BlockRead(f, p, sizeof(p));
        StringGrid2.Cells[i - 1, j - 1] := IntToStr(p);
      end;
    CloseFile(f);
  //end;
end;

              P.S. Ты в курсе, что в StringGrid будет транспонированная относительно StringGrid1 матрица?

              0

              Модератор: Модераторы

              Error 103

              После компилирования при запуске возникает ошибка:
              Runtime error 103 at <адрес>
              В программе нету работы с файлами.
              Есть только обращение к таким процедурам
              WRITEln(‘N=’);
              READLN(N);
              READLN;
              В ошибке указан номер строчки , которой соответствует WRITEln(‘N=’);

              Компилирую из командной строки(.bat фай) такого содержания
              fpWbinwin32ppc386 -Sd -Sg -Un -O1 -Xs -gl %1
              Компилятор версии 1.0.10 [2003/06/27].
              Также пробовал версию 2.4.4 [2011/04/23]. При компилировании из командной строки ошибка таже самая,
              а вот при компилировании из-под оболочки fp.exe всё компилируется и запускается без ошибок.

              В чем может быт причина возникновения такой ошибки 103 и как ее устранить?

              Mavlyudov
              новенький
               
              Сообщения: 50
              Зарегистрирован: 24.01.2010 20:35:23

              Re: Error 103

              Сообщение Сквозняк » 12.12.2011 04:48:52

              Многие процедуры паскаля, в частности writeln, на нём не реализованы а представляют собой обёртку к системным функциям написанным на языке C. То есть, если очень постараться, можно словить баги этого языка. Попробуй компилировать из коммандной строки не компилятором ppc386 а более для этого предназначенным fpc и без опций. Если заработает, то компилируй снова и добавляй каждый раз по одной новой опции, так ты узнаешь, какая из них вызывает ошибку. Если не поможет, то пример кода вызвающий ошибку в студию :D

              Сквозняк
              энтузиаст
               
              Сообщения: 1008
              Зарегистрирован: 29.06.2006 22:08:32

              Re: Error 103

              Сообщение Sergei I. Gorelkin » 12.12.2011 08:45:06

              Скорее всего не хватает ключа -Wg или директивы {$apptype console} в начале программы.

              Аватара пользователя
              Sergei I. Gorelkin
              энтузиаст
               
              Сообщения: 1390
              Зарегистрирован: 24.07.2005 14:40:41
              Откуда: Зеленоград
              • Профиль
              • ICQ

              Re: Error 103

              Сообщение Mavlyudov » 13.12.2011 03:12:11

              Сквозняк
              Я предполагал, что fpc (или fp) использует ppc386 при компиляции, поэтому искал файл настроек с директивами, которые можно прописать и в командной строке. Как оказалось, fp и ppc386 — два независимых приложения.
              Sergei I. Gorelkin
              Видимо, речь все таки идет о ключе ключе -WС. Да, теперь компилируется.
              Но при компиляции компилером версии 1.0.10 возникла другая ошибка 203. Переполнение кучи.
              Runtime error 203 at адрес
              и еще несколько адресов ниже
              указана строка с кодом GetMem(ARRM[I], sizeof(ARRM[I]^));
              При использовании компилятора версии 2.4.4 такой ошибки не возникает. Но нужно разобраться именно с ошибкой компилятора более ранней версии.
              Компилирую как и раньше командной строкой через ppc386.
              Настройки .bat файла:
              FPC2.4.4bini386-win32ppc386 -Sd -Sg -Un -O1 -Xs -gl %1 -FU<директория модулей> -Foc:<директория модулей> -WC -WN

              При запуске программы предполагается ввод большого числа(например, 20000), так чтобы выполнилась часть кода в except.

              Вот код:

              Код: Выделить всё
              program Project4;

              //uses Windows, SysUtils, dos;
              { H+}
              { mode Delphi}
              { apptype console}

              const
                NNMAT=30000;{8100;}{4096;}{16380;}
                NNARR=30000;

              type
                MAS = array [0..NNMAT-1] of Double;
                ARR = ^MAS;
                MAS2 = array [0..NNARR] of ARR;
                PMAS2 = ^MAS2;

              var {-------------------------------}
                NMAT0, NMAT: INTEGER;
                ARRM: array [0..NNARR] of ARR;
                ARR0: ARR;
                GE:DWORD;

              procedure MAT_PRED(N:INTEGER);
              var
                NN, I: LONGINT;
              begin
                NN:= SQR(N);
                I:= 0;
                NMAT:= 0;

                while (NMAT < NN) AND (I < NNARR) DO
                begin
                  try
                    GetMem(ARRM[I], sizeof(ARRM[I]^));
                    //sizeof(Double)*NNMAT
                  except
                    Writeln('It was GOTO',#$20,I,#$20,NMAT);
                    Dec(NMAT);
                  end;
                  Inc(I);
                  Inc(NMAT, NNMAT);
              //    writeln(I,' ',NMAT,' '{,MEMAVAIL,' ',MAXAVAIL});
                end;
              NMAT0:= NMAT;
              Writeln(I,' ',NMAT0);
              end;{MAT_PRED}

              var
                N: INTEGER;
              begin
                WRITEln('N=');
                READLN(N);
                MAT_PRED(N);
                WRITELN('Filled Memory: ',SQRT(NMAT0):9:3);
                READLN;
              end.

              Mavlyudov
              новенький
               
              Сообщения: 50
              Зарегистрирован: 24.01.2010 20:35:23

              Re: Error 103

              Сообщение Сквозняк » 13.12.2011 06:54:25

              Код: Выделить всё
              {$mode Delphi}

              Без значка $ мой компилятор директиву не принимает.
              Используя ppc386 напрямую, ты без пользы ломаешь кроссплатформенность своего скрипта — в каждой платформе этот компилятор называется по разному.

              Сквозняк
              энтузиаст
               
              Сообщения: 1008
              Зарегистрирован: 29.06.2006 22:08:32

              Re: Error 103

              Сообщение Mavlyudov » 14.12.2011 01:45:22

              Сквозняк
              У меня без $, т.к. закомментированы. Все режимы выставлены через командную строку в ключах.
              Вопрос не в кроссплатформенности, а в том, как отладить приведенный код

              Mavlyudov
              новенький
               
              Сообщения: 50
              Зарегистрирован: 24.01.2010 20:35:23

              Re: Error 103

              Сообщение Sergei I. Gorelkin » 14.12.2011 14:15:28

              Исключения обрабатываются только при подключенном модуле sysutils. Если он закомментарен, то вылет с runtime error — нормальное поведение.

              Аватара пользователя
              Sergei I. Gorelkin
              энтузиаст
               
              Сообщения: 1390
              Зарегистрирован: 24.07.2005 14:40:41
              Откуда: Зеленоград
              • Профиль
              • ICQ

              Вернуться в Free Pascal Compiler

              Кто сейчас на конференции

              Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 5

              Don’t suffer from Windows errors anymore.

            • 1. Download and install ASR Pro
            • 2. Launch the application and click on the «Restore» button
            • 3. Select the files or folders you want to restore and click on the «Restore» button

              • Download this fixer software and fix your PC today.

              If you are experiencing turbo Pascal Runtime Error 103 on your system, we hope this guide will help you. From the Free Pascal wiki.│ Deutsch (de)│ suomi (fi)│ A runtime error is a permanent error condition that occurs during a new start, i.e., the execution of an important program.

              : >> – TP 6.0 generated error 103 (file not opened)
              :: – Error 103 just generated after ‘WRITELN;’ The instruction supposedly intended for displaying the grouping is empty. This happens immediately after starting the program.
              :.:.
              :.:.
              :..1.. – The error occurs only i) on: old 286 IBM and at ii) Pentium (90 i MHz ) Calculator
              : . . . – earlier versions of the same program worked without problems
              :
              ::- for example, an error that does not occur on a computer on Orga 350 pentium-ii MHz and programming stops
              :
              :because as far as I know , the error “cannot open file” occurredonly when your whole family does the following: [code]
              :write(f,’…. ‘);
              :
              : [/code]
              : where f is significant variable of any file type, and sometimes specifically [italic]writeln()[/italic] for text, not buyers are [italic]append()[/italic] or [italic]rewrite()[/italic] the file definitely dies .. if you have already edited [italic]close()[/italic] .. statement:
              But:
              this will cause, on machines, all and almost all versions of the tp/others compiler that support the operator I/O (they should all be) (if the house does not support it, it will not recognize not the real code.. try )
              :
              : like TP7 basically what I found:

              I just couldn’t open a great file…

              I+ Note that using this situation overrides the DOS trap

              turbo pascal runtime error 103

              If I don’t know if the error mentioned here is the result, then
              writeln(‘File not found.’);
              else
              writeln(‘File found.’);

              The result of an overflow error returns a value, but you can also control what happens.

              I’ll go home or check variable names and ask them to help you.

              Runtime error 103in the binary search tree

              Osmo Ronkan
              #1 / 2

              on

              Doctor. John Stockto
              #2 / 2

              Runtime error 103 in binary Face=”Courier, search tree

              monospaced

              Quote:

              >I love my files. to meneed help please, I’m getting runtime error 103,
              >000044D5, possibly when I access the tutorial. String Printpreorder(tree); one in the
              main page of the program in the REPEAT section.

              Don’t suffer from Windows errors anymore.

              Is your computer acting up? Are you getting the dreaded blue screen of death? Relax, there’s a solution. Just download ASR Pro and let our software take care of all your Windows-related problems. We’ll detect and fix common errors, protect you from data loss and hardware failure, and optimize your PC for maximum performance. You won’t believe how easy it is to get your computer running like new again. So don’t wait any longer, download ASR Pro today!

            • 1. Download and install ASR Pro
            • 2. Launch the application and click on the «Restore» button
            • 3. Select the files or folders you want to restore and click on the «Restore» button

              • >What I want to take into account is that I am using Delphi 3 in which I do all my coding, there might be a bug in some Delphi software, or what am i doing wrong?

              You’ve posted encrypted tutorials in the manual text newsgroup.

              You’re asking a Delphi question in any new Pascal newsgroup.

              turbo pascal runtime error 103

              You probably
              didn’t read the mini-FAQ.

              You may not have read the FAQ.

              quote:

              >[The UUEencoded file (allq2a.dpr) was first included here.

              ]

              What causes runtime error?

              A runtime error is almost any software or hardware problem that prevents Internet Explorer from working properly. Runtime errors can occur when your website uses HTML code that is incompatible with web browser functions.

              > [Here UUEencoded file (integer.txt) is included.]

              —

              TP/BP/Delphi/&c., links to topics and FAQs
              ;

              Download this fixer software and fix your PC today.

              Turbo Pascal Runtime Error 103
              Erro De Tempo De Execucao Turbo Pascal 103
              Turbo Pascal Laufzeitfehler 103
              Oshibka Vypolneniya Turbo Paskalya 103
              Error De Tiempo De Ejecucion Turbo Pascal 103
              Erreur D Execution Turbo Pascal 103
              터보 파스칼 런타임 오류 103
              Errore Di Runtime Turbo Pascal 103
              Turbo Pascal Runtime Fout 103
              Blad Runtime Turbo Pascal 103

              Milton Tynan

              Author message
              Search

              Repeat error 103 in binary tree

              Quote:

              >Hello everyone

              >I have attached my files. I need help please. I get any runtime error 103 at
              >000044D5 because they run the program. String Printpreorder(tree); “in >The main
              section of a particular program in the REPEAT section.

              >What I often want to know is that I use Delphi 3 to test all my encodings, there are

              First, this is a small Delphi newsgroup.Second binary release
              accidentally

              Osmo

              Wednesday, June 18, 1902, 08:00:00 GMT

              Click here follow the steps to fix Pascal Runtime Error 103 and related errors.

              Instructions

               

              To Fix (Pascal Runtime Error 103) error you need to
              follow the steps below:

              Step 1:

              		  
              Download
              (Pascal Runtime Error 103) Repair Tool
                 

              Step 2:

              		  
              Click the «Scan» button
                 

              Step 3:

              		  
              Click ‘Fix All‘ and you’re done!
               

              Compatibility:
              Windows 7, 8, Vista, XP               Download Size: 6MB
              Requirements: 300 MHz Processor, 256 MB Ram, 22 MB HDD

              Limitations:
              This download is a free evaluation version. To unlock all features and tools, a purchase is required.

              Pascal Runtime Error 103 Error Codes are caused in one way or another by misconfigured system files
              in your windows operating system.

              If you have Pascal Runtime Error 103 errors then we strongly recommend that you

              Download (Pascal Runtime Error 103) Repair Tool.

              This article contains information that shows you how to fix
              Pascal Runtime Error 103
              both
              (manually) and (automatically) , In addition, this article will help you troubleshoot some common error messages related to Pascal Runtime Error 103 error code that you may receive.

              Note:
              This article was updated on 2023-04-04 and previously published under WIKI_Q210794

              Contents

              •   1. What is Pascal Runtime Error 103 error?
              •   2. What causes Pascal Runtime Error 103 error?
              •   3. How to easily fix Pascal Runtime Error 103 errors

              The Pascal Runtime Error 103 error is the Hexadecimal format of the error caused. This is common error code format used by windows and other windows compatible software and driver vendors.

              This code is used by the vendor to identify the error caused. This Pascal Runtime Error 103 error code has a numeric error number and a technical description. In some cases the error may have more parameters in Pascal Runtime Error 103 format .This additional hexadecimal code are the address of the memory locations where the instruction(s) was loaded at the time of the error.

              What causes Pascal Runtime Error 103 error?

              The Pascal Runtime Error 103 error may be caused by windows system files damage. The corrupted system files entries can be a real threat to the well being of your computer.

              There can be many events which may have resulted in the system files errors. An incomplete installation, an incomplete uninstall, improper deletion of applications or hardware. It can also be caused if your computer is recovered from a virus or adware/spyware
              attack or by an improper shutdown of the computer. All the above actives
              may result in the deletion or corruption of the entries in the windows
              system files. This corrupted system file will lead to the missing and wrongly
              linked information and files needed for the proper working of the
              application.

              How to easily fix Pascal Runtime Error 103 error?

              There are two (2) ways to fix Pascal Runtime Error 103 Error:

              Advanced Computer User Solution (manual update):

              1) Start your computer and log on as an administrator.

              2) Click the Start button then select All Programs, Accessories, System Tools, and then click System Restore.

              3) In the new window, select «Restore my computer to an earlier time» option and then click Next.

              4) Select the most recent system restore point from the «On this list, click a restore point» list, and then click Next.

              5) Click Next on the confirmation window.

              6) Restarts the computer when the restoration is finished.

              Novice Computer User Solution (completely automated):

              1) Download (Pascal Runtime Error 103) repair utility.

              2) Install program and click Scan button.

              3) Click the Fix Errors button when scan is completed.

              4) Restart your computer.

              How does it work?

              This tool will scan and diagnose, then repairs, your PC with patent
              pending technology that fix your windows operating system registry
              structure.
              basic features: (repairs system freezing and rebooting issues , start-up customization , browser helper object management , program removal management , live updates , windows structure repair.)

              : : — TP 6.0 Program generates the Error 103 (FIle not Open)
              : : — Error 103 generated after a simple ‘WRITELN;’ statement which is supposed to put an empty line on the screen. This occurs right after the start of the program.
              : :
              : :
              : : — error occurs only on: i) old 286 IBM AT and ii) Pentium I (90 MHz) computer
              : : — earlier versions of same program ran smoothly
              : :
              : : — the error does not occur on my Pentium-II 350 MHz computer on which the programming is done
              :
              : as best i know, the error «file not open» is only when you do something like: [code]
              : write(f,’….’);
              :
              : [/code]
              : where f is a var of any file type, or specifically [italic]writeln()[/italic] for text, and you didn’t [italic]append()[/italic] or [italic]rewrite()[/italic] the file.. or if you already [italic]close()[/italic]ed the file..
              :
              : but that will happen on all computers, and all tp/other compiler versions which support file i/o (which should be all) (if it does not support that, it won’t recognize the code..)
              :
              : try finding TP7 is basically what i’d suggest.. i don’t have a 286 or a p1/90 and i dont’ have problems on my p3/450..
              :
              : //Noam
              :

              There is away of handling this….

              I had just recently had to do this re opening a file…

              Like write(‘Enter file name :);
              readln(filename);

              {I+} {Note this is used, it overrides the dos error interruption program}

              assgin(f,{the location of file ie c:tpin));
              reset(f);

              {I-} {Restores dos error handling}

              if {I am not sure of the name here} errorresult then
              writeln(‘File not found.’);
              else
              writeln(‘File found.’);

              The above errorresult returns a value and U then have contorl of what is happening.

              I shall go home and check this variable name and report it back to you..

              Michael

              A RunError is a low-level error emitted by the Free Pascal Run Time Library. In Lazarus, RunErrors are raised as exceptions.

              #
              Short description
              Explanation

              1
              Invalid function number
              An invalid operating system call was attempted.

              2
              File not found
              Reported when trying to erase, rename or open a non-existent file.

              3
              Path not found
              Reported by the directory handling routines when a path does not exist or is invalid. Also reported when trying to access a non-existent file.

              4
              Too many open files
              The maximum number of files currently opened by your process has been reached. Certain operating systems limit the number of files which can be opened concurrently, and this error can occur when this limit has been reached.

              5
              File access denied
              Permission to access the file is denied. This error might be caused by one of several reasons:

              • Trying to open for writing a file which is read-only, or which is actually a directory.
              • File is currently locked or used by another process.
              • Trying to create a new file, or directory while a file or directory of the same name already exists.
              • Trying to read from a file which was opened in write-only mode.
              • Trying to write from a file which was opened in read-only mode.
              • Trying to remove a directory or file while it is not possible.
              • No permission to access the file or directory.

              6
              Invalid file handle
              If this happens, the file variable you are using is trashed; it indicates that your memory is corrupted.

              12
              Invalid file access code
              Reported when a reset or rewrite is called with an invalid FileMode value.

              15
              Invalid drive number
              The number given to the Getdir or ChDir function specifies a non-existent disk.

              16
              Cannot remove current directory
              Reported when trying to remove the currently active directory.

              17
              Cannot rename across drives
              You cannot rename a file such that it would end up on another disk or partition.

              100
              Disk read error
              An error occurred when reading from disk. Typically happens when you try to read past the end of a file.

              101
              Disk write error
              Reported when the disk is full, and you’re trying to write to it.

              102
              File not assigned
              This is reported by Reset, Rewrite, Append, Rename and Erase, if you call them with an unassigned file as a parameter.

              103
              File not open
              Reported by the following functions : Close, Read, Write, Seek, EOf, FilePos, FileSize, Flush, BlockRead, and BlockWrite if the file is not open.

              104
              File not open for input
              Reported by Read, BlockRead, Eof, Eoln, SeekEof or SeekEoln if the file is not opened with Reset.

              105
              File not open for output
              Reported by write if a text file isn’t opened with Rewrite.

              106
              Invalid numeric format
              Reported when a non-numeric value is read from a text file, and a numeric value was expected.

              107
              Invalid enumeration
              Reported when a text representation of an enumerated constant cannot be created in a call to str or write(ln).

              150
              Disk is write-protected
              (Critical error)

              151
              Bad drive request struct length
              (Critical error)

              152
              Drive not ready
              (Critical error)

              154
              CRC error in data
              (Critical error)

              156
              Disk seek error
              (Critical error)

              157
              Unknown media type
              (Critical error)

              158
              Sector Not Found
              (Critical error)

              159
              Printer out of paper
              (Critical error)

              160
              Device write fault
              (Critical error)

              161
              Device read fault
              (Critical error)

              162
              Hardware failure
              (Critical error)

              200
              Division by zero
              The application attempted to divide a number by zero.

              201
              Range check error
              If you compiled your program with range checking on, then you can get this error in the following cases:

              1. An array was accessed with an index outside its declared range.
              2. Trying to assign a value to a variable outside its range (for instance an enumerated type).

              202
              Stack overflow error
              The stack has grown beyond its maximum size (in which case the size of local variables should be reduced to avoid this error), or the stack has become corrupt. This error is only reported when stack checking is enabled.

              203
              Heap overflow error
              The heap has grown beyond its boundaries. This is caused when trying to allocate memory explicitly with New, GetMem or ReallocMem, or when a class or object instance is created and no memory is left. Please note that, by default, Free Pascal provides a growing heap, i.e. the heap will try to allocate more memory if needed. However, if the heap has reached the maximum size allowed by the operating system or hardware, then you will get this error.

              204
              Invalid pointer operation
              You will get this in several cases:

              • if you call Dispose or Freemem with an invalid pointer
              • in case New or GetMem is called, and there is no more memory available. The behavior in this case depends on the setting of ReturnNilIfGrowHeapFails. If it is True, then Nil is returned. if False, then runerror 204 is raised.

              205
              Floating point overflow
              You are trying to use or produce real numbers that are too large.

              206
              Floating point underflow
              You are trying to use or produce real numbers that are too small.

              207
              Invalid floating point operation
              Can occur if you try to calculate the square root or logarithm of a negative number.

              210
              Object not initialized
              When compiled with range checking on, a program will report this error if you call a virtual method without having called its object’s constructor.

              211
              Call to abstract method
              Your program tried to execute an abstract virtual method. Abstract methods should be overridden, and the overriding method should be called.

              212
              Stream registration error
              This occurs when an invalid type is registered in the objects unit.

              213
              Collection index out of range
              You are trying to access a collection item with an invalid index (objects unit).

              214
              Collection overflow error
              The collection has reached its maximal size, and you are trying to add another element (objects unit).

              215
              Arithmetic overflow error
              This error is reported when the result of an arithmetic operation is outside of its supported range. Contrary to Turbo Pascal, this error is only reported for 32-bit or 64-bit arithmetic overflows. This is due to the fact that everything is converted to 32-bit or 64-bit before doing the actual arithmetic operation.

              216
              General Protection fault
              The application tried to access invalid memory space. This can be caused by several problems:

              1. Dereferencing a nil pointer.
              2. Trying to access memory which is out of bounds (for example, calling move with an invalid length).

              217
              Unhandled exception occurred
              An exception occurred, and there was no exception handler present. The sysutils unit installs a default exception handler which catches all exceptions and exits gracefully.

              218
              Invalid value specified
              Error 218 occurs when an invalid value was specified to a system call, for instance when specifying a negative value to a seek() call.

              219
              Invalid typecast
              Thrown when an invalid typecast is attempted on a class using the as operator. This error is also thrown when an object or class is typecast to an invalid class or object and a virtual method of that class or object is called. This last error is only detected if the -CR compiler option is used.

              222
              Variant dispatch error
              No dispatch method to call from variant.

              223
              Variant array create
              The variant array creation failed. Usually when there is not enough memory.

              224
              Variant is not an array
              This error occurs when a variant array operation is attempted on a variant which is not an array.

              225
              Var Array Bounds check error
              This error occurs when a variant array index is out of bounds.

              227
              Assertion failed error
              An assertion failed, and no AssertErrorProc procedural variable was installed.

              229
              Safecall error check
              This error occurs is a safecall check fails, and no handler routine is available.

              231
              Exception stack corrupted
              This error occurs when the exception object is retrieved and none is available.

              232
              Threads not supported
              Thread management relies on a separate driver on some operating systems (notably, Unixes). The unit with this driver needs to be specified on the uses clause of the program, preferably as the first unit (cthreads on unix).

              Add {$define UseCThreads} in the top of the first Pascal unit (usually the project .lpr file)

              Источник

              Понравилась статья? Поделить с друзьями:
            • 103 ошибка ниссан патрол
            • 100018 ошибка league of legends wild rift
            • 100016 ошибка сканера epson 5799
            • 103 ошибка бмв
            • 100000403 zoom код ошибки