1 ошибка license check failed giving up

@eliezedeck
If you are on Linux
I used to have 2 Qt builds in one Ubuntu OS. One for root, one for main user (I know, I was so noob). And for root, It was giving the same license error for the starting of Qt Creator. If there are two builds of Qt, try to execute Qt Creator with sudo, and try the opposite!

sudo qtcreator
qtcreator

If any of both does not work, check if is there a license file in your home folder. If there is, try to remove it (with a backup) and run again!

cd
ls -a   //check if is .qt-license file here
mv .qt-license .qt-license.bak
qtcreator   //or "sudo qtcreator"

If this does not helps too, try to install Qt Creator with apt commands.

sudo apt-get update
sudo apt-get upgrade
sudo apt-get install qtcreator
qtcreator     //or "sudo qtcreator"

If any of these helps, maybe you have installed the commercial version by a reading mistake as «community version». You should install the «Open Source Version». If so, you should remove everything you have installed, and check the Installation of Qt 5 on Ubuntu topic!

If you are on Windows
You can basically just remove everything you have installed, and download it again from here by choosing the version! It should solve your issue completely!
By using the link, you can basically just remove Qt Creator from your computer, download Qt Creator from the link and configure Qt Creator later. Or you can remove everything including Qt libraries, plugins and stuff. If you so, you should select the «qt» from download list. Not the «qtcreator».

Direct Links
qt-creator-opensource-windows-x86_64-4.9.2.exe (Latest version [4.9.2], 168M)
qt-opensource-windows-x86-5.13.0.exe (Latest version [5.13.0], 3.7G)

I hope you can solve your issue soon!
Cheers!

Источник

According to ddubya on #qt on irc.freenode.net, http://download.qt.io/online/qtsdkrepository/linux_x64/desktop/qt5_5100/qt.qt5.5100.gcc_64/ is «the commercial version» which cannot be used in GPL mode.

Seemingly the GPL version is not available in individual subcomponents but only as a 1G archive at https://download.qt.io/archive/qt/5.10/5.10.0/qt-opensource-linux-x64-5.10.0.run. As a workaround, we would need to download and repackage that (possibly as a squashfs file, even).

BUT https://download.qt.io/archive/online_installers/3.0/qt-unified-linux-x64-3.0.2-online.run can install in «open source mode» if no credentials are entered. So it must be doing some «black magic»…

1
2
3

I can never get it to install though… If it did, I could compare with xxd pre- and post- installation.

Источник

Discussion Forum for PX4, Pixhawk, QGroundControl, MAVSDK, MAVLink

Loading

Dronecode

PX4

QGroundControl

QGC

MAVSDK

MAVLink

Documentation

Docs

Support

Help

Источник
 

Всем привет.
при установке собственного приложения в «Битрикс24. Корпоративный портал» после заполнения формы «Добавить приложение» ругается License check failed.
 

Аналогичная проблема.
Все обновления установлены. Использую пробную версию портала:

https://www.1c-bitrix.ru/download/intranet.php
 

Коллеги, кто-нибудь решил эту проблему?
 

Если у Вас тестовая версия (демо-версия) с ключом DEMO — то всегда будет такой ответ.

Нам для этого понадобилось использовать NFR-лицензию
 
 

Пользователь 1890127

Эксперт

Сообщений: 400
Баллов: 68
Регистрация: 28.03.2018

#6

0

30.08.2018 07:43:12

Цитата
Андрей Николаев написал:

Нам для этого понадобилось использовать NFR-лицензию

А что это за лицензия и как её получить?

Просто мы сейчас на демо работаем, лицензионный ключ, конечно, покупать собираемся, но, как я понял, на ближайший месяц руководство покупку лицензии в бюджет не закладывало.

Вот и непонятно, что делать, т.к. из маркетплейса приложения поставить нельзя, открытый чат не работает, телефонию интегрировать нельзя….
 

Пользователь 713209

Посетитель

Сообщений: 42
Баллов: 5
Регистрация: 28.09.2016

#7

0

30.08.2018 11:21:27

Цитата
Роман написал:
Вот и непонятно, что делать, т.к. из маркетплейса приложения поставить нельзя, открытый чат не работает, телефонию интегрировать нельзя….

Если вы хотите протестировать какое либо решение, но на демо лицензию оно не ставится — возможно стоит обратиться к разработчику решения и попросить его предоставить вам версию для тестирования на демо ключе.
Ну и в конце то концов — демо на то и демо, там есть свои ограничения :)
 

Пользователь 713209

Посетитель

Сообщений: 42
Баллов: 5
Регистрация: 28.09.2016

#8

0

30.08.2018 11:24:01

Цитата
Роман написал:
А что это за лицензия и как её получить?

стать партнером и продвигать продукт :)

http://partners24.1c-bitrix.ru
 

Пользователь 1890127

Эксперт

Сообщений: 400
Баллов: 68
Регистрация: 28.03.2018

#9

0

30.08.2018 12:06:23

Цитата
Сергей Гринюк написал:

стать партнером и продвигать продукт

http://partners24.1c-bitrix.ru

Ну это тоже есть в планах, но не в этом году точно.

Кстати, я где-то читал, что для получения этой самой бесплатной лицензии нужно продать лицензий на определённую сумму в год?
 

Пользователь 1890127

Эксперт

Сообщений: 400
Баллов: 68
Регистрация: 28.03.2018

#10

0

30.08.2018 12:28:32

Цитата
Сергей Гринюк написал:

Если вы хотите протестировать какое либо решение, но на демо лицензию оно не ставится — возможно стоит обратиться к разработчику решения и попросить его предоставить вам версию для тестирования на демо ключе.

А мне казалось, что это в ядре битрикса стоит запрет на установку приложений на демо-ключе…
Источник

Forum Updated on Feb 6th

This topic has been deleted. Only users with topic management privileges can see it.

  • I installed Qt 5.5 with the Maintenance tool, but get the following error when building with the Desktop 5.5.1 GCC 64-bit kit:

    Error: Qt license file was not found!
Project ERROR: License check failed! Giving up ...

    I don’t get the error with Desktop 5.6.0. Does the 5.5 build system think I am on a commercial version of Qt? Why?

  • Hi,

    Did you check that you have the license file matching your installed Qt ?

  • Well, I have the open source version of Qt installed, so I should not need a license file? My suspicion is that Maintenance Tool is grabbing the commercial version. Is there a way to ensure/force Maintenance Tool to install the open source version?

  • Are you sure you are using your OpenSource Qt Version + Kit in your project ? Both can coexist on your system without any problem.

  • I configured a kit with the Qt 5.5 version that Maintenance Tool downloaded, and I get the license error with that. How can I find out if my 5.5 version is opensource or not?

    Some more details:

    1. I downloaded and installed the opensource version of Qt Creator with Qt 5.5. This was working fine.
    2. After 5.6 was released, I downloaded that via Maintenance Tool and got rid of 5.5.
    3. Unfortunately 5.6 does not work because of a missing platform plugin on my old linux distribution, so I decided to go back to 5.5.
    4. Downloaded 5.5 via Maintenance Tool.

    That’s when the license error emerged.

  • Call /path/to/qmake -project . in a dummy folder. If it’s an open source qmake it should not have any problem. If not you’ll have the license check warning.

  • I do indeed get the license warning with 5.5 in a temp folder:

    $ ~/Development/Qt/5.5/gcc_64/bin/qmake -project .

Error: Qt license file was not found!
Project ERROR: License check failed! Giving up ...

    So now how do I force Maintenance Tool to download the open source version?

  • You can do so by not giving any credentials when running the installer.

  • The MaintenanceTool does not ask for any credentials anyway..? I just go to «Add or remove components», then select Qt 5.5, and let it do its thing. Note that the original Qt install was indeed (verifiably) open source. It is just the updates that I’m running into problems with.

    Perhaps I should just start from scratch and reinstall? Thanks, and I appreciate your patience!

  • On the first screen, doesn’t it ?

  • No, Maintenance Tool was not asking for sign-in. There was no go — had to resort to the nuclear option of uninstalling everything and then reinstalling 5.5.1 from the qt.io archive. Now 5.5 works as before.

  • That’s strange… Anyway, glad you could get it to work again.

    Since everything is ok now, please mark the thread as solved using the «Topic Tool» button so that other forum users may know a solution has been found :)

  • Reply with quote

Building VBox OSE v5.0.0 on Win7 — missing QT

I’m trying to build VBox 5.0.0 from source on a windows 7 machine. I understand it requires QT for the build, but I’m not sure how to get it.

Do I have to download QT source code and build locally because I can’t find a binary version of it from the QT website? Or is there anywhere that I can download the libraries directly?

I downloaded the source code of qt-everywhere-enterprise-src-5.4.2 and tried to build it using command:

Code: Select all   Expand viewCollapse view
configure -prefix %CD%qtbase -commercial -nomake tests

.

But it got an error for missing license information as below:

Code: Select all   Expand viewCollapse view
Error: Qt License file (.qt-license) was not found!

Enter your license information.
Licensee:
Qt5 License Key:

Error: Invalid licensekey!
Error: Licensee info missing!

Did I get a wrong version? Do I need to pay for a license for it?

Thanks a lot.

NTI
 
Posts: 21
Joined: 23. Jul 2015, 12:35
  • Reply with quote

Re: Building VBox OSE v5.0.0 on Win7 — missing QT

Postby NTI » 28. Jul 2015, 12:01

Thanks mpack.

I downloaded binaries of qt4.8.7, it contains most of the required QT components for building VBox, but VBoxQtCore4.lib, QtCoreVBox4.lib, VBoxQtNetwork4.lib, and QtNetworkVBox4.lib (required by VBox) are missing.

I also downloaded the source code of qt4.8.7, but building it gave me the message of «License file does not contain proper license key», even though under %USERPROFILE%, there is a .qt-license file containing:

# Qt license file (Created by the License Manager)
LicenseId=»xxx»
Licensee=»xxx»
# Used for Qt 4.x and Qt 5.0
LicenseKeyExt=xxxxx
# Used for Qt 5.1 ->
Qt5LicenseKey=xxxxx

Does anyone know how to get VBoxQtCore4.lib, QtCoreVBox4.lib, VBoxQtNetwork4.lib, and QtNetworkVBox4.lib?

NTI
 
Posts: 21
Joined: 23. Jul 2015, 12:35
  • Reply with quote

Re: Building VBox OSE v5.0.0 on Win7 — missing QT

Postby mpack » 28. Jul 2015, 12:07

Current Virtualbox versions (since 4.3.14) require DLLs to be signed. Obviously the Qt DLLs shipped with VirtualBox are signed by Oracle. If you build the sources yourself you’ll have to provide your own signature, or disable hardening. So I take back what I said before: if it isn’t your goal to disable hardening (which I assume is your goal on a Windows host) then you will need to compile and sign the Qt sources yourself.

The DLLs you mention will be Oracle’s built and signed versions of the Qt libs.

mpack
Site Moderator
 
Posts: 37953
Joined: 4. Sep 2008, 17:09
Primary OS: MS Windows 10
VBox Version: PUEL
Guest OSses: Mostly XP
  • Reply with quote

Re: Building VBox OSE v5.0.0 on Win7 — missing QT

Postby NTI » 28. Jul 2015, 12:39

Hi mpack

Thanks for the reply.

Either hardened or not, my goal is to build VBox somehow first. The error message of build VBox 5.0.0 is below:

Testing ‘C:/VBox/VirtualBox-5.0.0/tools/win.x86/qt/v4.7.3-vcc100’: bin/moc.exe not found
Testing ‘C:/VBox/VirtualBox-5.0.0/tools/win.x86/qt/v4.7.3-vcc100’: bin/uic.exe not found
Testing ‘C:/VBox/VirtualBox-5.0.0/tools/win.x86/qt/v4.7.3-vcc100’: include/Qt/qwidget.h not found
Testing ‘C:/VBox/VirtualBox-5.0.0/tools/win.x86/qt/v4.7.3-vcc100’: include/QtGui/QApplication not found
Testing ‘C:/VBox/VirtualBox-5.0.0/tools/win.x86/qt/v4.7.3-vcc100’: include/QtNetwork/QHostAddress not found
Testing ‘C:/VBox/VirtualBox-5.0.0/tools/win.x86/qt/v4.7.3-vcc100’: lib/QtCore4.lib not found
Testing ‘C:/VBox/VirtualBox-5.0.0/tools/win.x86/qt/v4.7.3-vcc100’: lib/VBoxQtCore4.lib not found
Testing ‘C:/VBox/VirtualBox-5.0.0/tools/win.x86/qt/v4.7.3-vcc100’: lib/QtCoreVBox4.lib not found
Testing ‘C:/VBox/VirtualBox-5.0.0/tools/win.x86/qt/v4.7.3-vcc100’: lib/QtNetwork4.lib not found
Testing ‘C:/VBox/VirtualBox-5.0.0/tools/win.x86/qt/v4.7.3-vcc100’: lib/VBoxQtNetwork4.lib not found
Testing ‘C:/VBox/VirtualBox-5.0.0/tools/win.x86/qt/v4.7.3-vcc100’: lib/QtNetworkVBox4.lib not found

From the QT 4.7.8 binaries (I can’t get v4.7.3 anywhere), I can get all the above apart from the few libs as I mentioned earlier. It’s interesting that the binaries contain QtCore4.lib and QtNetwork4.lib, but not the rest required libs. I’m just wondering whether there is a binary package that includes all the required for VBox building?

Last edited by NTI on 29. Jul 2015, 14:59, edited 1 time in total.

NTI
 
Posts: 21
Joined: 23. Jul 2015, 12:35
  • Reply with quote

Re: Building VBox OSE v5.0.0 on Win7 — missing QT

Postby mpack » 28. Jul 2015, 12:58

Someone else will have to answer that. It’s years since I last tried to build the VBox sources on a Windows host.

mpack
Site Moderator
 
Posts: 37953
Joined: 4. Sep 2008, 17:09
Primary OS: MS Windows 10
VBox Version: PUEL
Guest OSses: Mostly XP
  • Reply with quote

Re: Building VBox OSE v5.0.0 on Win7 — missing QT

Postby NTI » 28. Jul 2015, 17:46

I’ve tried to build QT4.7.3, but still can’t get VBoxQtCore4.lib, QtCoreVBox4.lib, VBoxQtNetwork4.lib or QtNetworkVBox4.lib.

From the names of the libs, they seem to be related to VBox specifically. So probably building pure qt won’t generate them by default. But I’ve got no clue what to do next :(

NTI
 
Posts: 21
Joined: 23. Jul 2015, 12:35
  • Reply with quote

Re: Building VBox OSE v5.0.0 on Win7 — missing QT

Postby mpack » 28. Jul 2015, 18:24

As I said, those will be Oracle’s signed builds, as you can easily verify by examining their certificates in the host. Meaning you can’t reproduce them exactly. So as I said before, you can either build and self sign, or you can turn off the hardening feature.

mpack
Site Moderator
 
Posts: 37953
Joined: 4. Sep 2008, 17:09
Primary OS: MS Windows 10
VBox Version: PUEL
Guest OSses: Mostly XP
  • Reply with quote

Re: Building VBox OSE v5.0.0 on Win7 — missing QT

Postby mhanor » 28. Jul 2015, 22:17

If you look at configure.vbs, starting at line 2066, you’ll see that the script requires one of several files (example: QtCore4.lib or VBoxQtCore4.lib or QtCoreVBox4.lib). Your qt files are just not there. Look at configure.log to understand what are the files that the script tries to access and where. I’m pretty sure your Qt files are somewhere else, not in C:/VBox/VirtualBox-5.0.0/tools/win.x86/qt/v4.7.3-vcc100, as seen in your error messages. You are not passing the qt path as argument to the configure script.
Do not use Qt5, VirtualBox is not ready for it.

mhanor
Volunteer
 
Posts: 321
Joined: 7. Oct 2009, 12:40
Primary OS: MS Windows 10
VBox Version: PUEL
Guest OSses: various
  • Reply with quote

Re: Building VBox OSE v5.0.0 on Win7 — missing QT

Postby NTI » 29. Jul 2015, 09:46

Hi mhanor

Thanks for the reply.

I understand the VBox build errors, because I didn’t build QT at all at that time. I’m not looking for the libs specifically under the directory (C:/VBox/VirtualBox-5.0.0/tools/win.x86/qt/v4.7.3-vcc100…). What I’m doing is to build QT4.7.3 and look for all the required libs (QtCore4.lib, VBoxQtCore4.lib, QtCoreVBox4.lib, QtNetwork4.lib, VBoxQtNetwork4.lib, QtNetworkVBox4.lib) under ..qt-4.7.3lib. But only QtCore4.lib and QtNetworkVBox4.lib are present.

NTI
 
Posts: 21
Joined: 23. Jul 2015, 12:35
  • Reply with quote

Re: Building VBox OSE v5.0.0 on Win7 — missing QT

Postby NTI » 29. Jul 2015, 13:25

Hi mpack

I don’t have to build VBox with the hardening feature. But to build a version of VBox (hardening or not), it requires those missing QT libs. I supposed those libs should be available after building QT source code. But they are not. I only get QtCore4.lib and QtNetwork4.lib after building QT.

NTI
 
Posts: 21
Joined: 23. Jul 2015, 12:35
  • Reply with quote

Re: Building VBox OSE v5.0.0 on Win7 — missing QT

Postby mpack » 29. Jul 2015, 14:46

NTI wrote:I only get QtCore4.lib and QtNetwork4.lib after building QT.

Well, «VBox» certainly won’t appear in a Qt build, so I would assume that’s them. Have you compared export lists?

mpack
Site Moderator
 
Posts: 37953
Joined: 4. Sep 2008, 17:09
Primary OS: MS Windows 10
VBox Version: PUEL
Guest OSses: Mostly XP
  • Reply with quote

Re: Building VBox OSE v5.0.0 on Win7 — missing QT

Postby NTI » 29. Jul 2015, 15:03

mpack wrote:

NTI wrote:I only get QtCore4.lib and QtNetwork4.lib after building QT.

Well, «VBox» certainly won’t appear in a Qt build, so I would assume that’s them. Have you compared export lists?

What do I compare against? I don’t have the missing libs at all.

It does seem weird that it looks for VBox related libraries in QT build. But that’s what VBox configure errors have shown:

Testing ‘C:/VBox/VirtualBox-5.0.0/tools/win.x86/qt/v4.7.3-vcc100’: lib/VBoxQtCore4.lib not found
Testing ‘C:/VBox/VirtualBox-5.0.0/tools/win.x86/qt/v4.7.3-vcc100’: lib/QtCoreVBox4.lib not found
Testing ‘C:/VBox/VirtualBox-5.0.0/tools/win.x86/qt/v4.7.3-vcc100’: lib/VBoxQtNetwork4.lib not found
Testing ‘C:/VBox/VirtualBox-5.0.0/tools/win.x86/qt/v4.7.3-vcc100’: lib/QtNetworkVBox4.lib not found

NTI
 
Posts: 21
Joined: 23. Jul 2015, 12:35
  • Reply with quote

Re: Building VBox OSE v5.0.0 on Win7 — missing QT

Postby mpack » 29. Jul 2015, 16:07

I mean compare the export list of QtCore4.dll, which presumably you can build, against the QtCoreVBox4.dll file shipped with VirtualBox. I assume you know how to choose between static and dynamic library builds in your IDE, you understand that VBox is expecting the libraries in DLL form at runtime, and that the lib is generated as a byproduct of building the DLL.

mpack
Site Moderator
 
Posts: 37953
Joined: 4. Sep 2008, 17:09
Primary OS: MS Windows 10
VBox Version: PUEL
Guest OSses: Mostly XP
  • Reply with quote

Re: Building VBox OSE v5.0.0 on Win7 — missing QT

Postby Perryg » 29. Jul 2015, 16:22

To quote mhanor, if you are still seeing «C:/VBox/VirtualBox-5.0.0/tools/win.x86/qt/v4.7.3-vcc100′: lib/» You are not passing the qt path as argument to the configure script
If you do not state the proper place where your build is in the script it will always fall back to the default and of course it will not find it.

I wouldn’t worry much at this point about where the vbox files are as the build script should find them if it can find the actual qt binaries you have built.

Perryg
Site Moderator
 
Posts: 34373
Joined: 6. Sep 2008, 22:55
Primary OS: Linux other
VBox Version: OSE self-compiled
Guest OSses: *NIX

Return to VirtualBox OSE

Who is online

Users browsing this forum: No registered users and 4 guests

I’m trying to work my way through the pyqtdeploy documentation, trying to build the pyqt-demo project.

My system is an Ubuntu 18.04 (fresh installation, up-to-date)

$ uname -a :

Linux sui 4.15.0-39-generic #42-Ubuntu SMP Tue Oct 23 15:48:01 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux

I’m using pyqtdeploy v. 2.3.

I downloaded every file required by the build(*) but I have a problem with the Qt tarball : I downloaded https://download.qt.io/archive/qt/5.11/5.11.1/single/qt-everywhere-src-5.11.1.tar.xz, not knowing if it was the right file to be used.

… and this is what I got:

$ python3 build-demo.py --verbose --source-dir=[skipped] --installed-qt-dir=[skipped]


[skipped]Creating qmake...

Done.

Info: creating super cache file [skipped]/sysroot-linux-64/build/qt-everywhere-src-5.11.1/.qmake.super

Info: creating stash file [skipped]/demo/sysroot-linux-64/build/qt-everywhere-src-5.11.1/.qmake.stash


Error: Qt license file was not found!

Note: Also available for Linux: linux-clang linux-icc





  



                       
  







ERROR: You are not licensed to use this software.

pyqtdeploy-sysroot: Execution failed: returned exit code 3

I’m 100% sure the qt-*.tar.xz file is found since an message appears, saying that the file is unpacked.

I’m obviously missing something important : should I use a file like qt-everywhere-opensource-src-5.11.1.tar.xz although I can’t find such a file ?
Any help would be appreciated !

(*) required tarballs:

  • python : https://www.python.org/ftp/python/3.7.1/Python-3.7.1.tar.xz
    at https://www.python.org/downloads/release/python-371/
  • qt : https://download.qt.io/archive/qt/5.11/5.11.1/single/qt-everywhere-src-5.11.1.tar.xz at https://download.qt.io/archive/qt/5.11/5.11.1/single/
  • openssl : https://www.openssl.org/source/openssl-1.1.1.tar.gz at
    https://www.openssl.org/source/
  • zlib : https://zlib.net/zlib-1.2.11.tar.gz at https://zlib.net/
  • sip : https://sourceforge.net/projects/pyqt/files/sip/sip-4.19.13/sip-4.19.13.tar.gz at https://riverbankcomputing.com/software/sip/download
  • PyQt5 : https://sourceforge.net/projects/pyqt/files/PyQt5/PyQt-5.11.3/PyQt5_gpl-5.11.3.tar.gz at https://www.riverbankcomputing.com/software/pyqt/download5
  • PyQt3D : https://sourceforge.net/projects/pyqt/files/PyQt3D/PyQt3D-5.11.3/PyQt3D_gpl-5.11.3.tar.gz at https://www.riverbankcomputing.com/software/pyqt3d/download
  • PyQtChart : https://sourceforge.net/projects/pyqt/files/PyQtChart/PyQtChart-5.11.3/PyQtChart_gpl-5.11.3.tar.gz at https://www.riverbankcomputing.com/software/pyqtchart/download
  • PyQtDataVisualization : https://sourceforge.net/projects/pyqt/files/PyQtDataVisualization/PyQtDataVisualization-5.11.3/PyQtDataVisualization_gpl-5.11.3.tar.gz at https://www.riverbankcomputing.com/software/pyqtdatavisualization/download
  • PyQtPurchasing : https://sourceforge.net/projects/pyqt/files/PyQtPurchasing/PyQtPurchasing-5.11.3/PyQtPurchasing_gpl-5.11.3.tar.gz at
    https://www.riverbankcomputing.com/software/pyqtpurchasing/download
  • QScintilla : https://sourceforge.net/projects/pyqt/files/QScintilla2/QScintilla-2.10.8/QScintilla_gpl-2.10.8.tar.gz at https://www.riverbankcomputing.com/software/qscintilla/download

I’m trying to work my way through the pyqtdeploy documentation, trying to build the pyqt-demo project.

My system is an Ubuntu 18.04 (fresh installation, up-to-date)

$ uname -a :

Linux sui 4.15.0-39-generic #42-Ubuntu SMP Tue Oct 23 15:48:01 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux

I’m using pyqtdeploy v. 2.3.

I downloaded every file required by the build(*) but I have a problem with the Qt tarball : I downloaded https://download.qt.io/archive/qt/5.11/5.11.1/single/qt-everywhere-src-5.11.1.tar.xz, not knowing if it was the right file to be used.

… and this is what I got:

$ python3 build-demo.py --verbose --source-dir=[skipped] --installed-qt-dir=[skipped]


[skipped]Creating qmake...

Done.

Info: creating super cache file [skipped]/sysroot-linux-64/build/qt-everywhere-src-5.11.1/.qmake.super

Info: creating stash file [skipped]/demo/sysroot-linux-64/build/qt-everywhere-src-5.11.1/.qmake.stash





  



                       
  







Error: Qt license file was not found!

Note: Also available for Linux: linux-clang linux-icc


ERROR: You are not licensed to use this software.

pyqtdeploy-sysroot: Execution failed: returned exit code 3

I’m 100% sure the qt-*.tar.xz file is found since an message appears, saying that the file is unpacked.

I’m obviously missing something important : should I use a file like qt-everywhere-opensource-src-5.11.1.tar.xz although I can’t find such a file ?
Any help would be appreciated !

(*) required tarballs:

  • python : https://www.python.org/ftp/python/3.7.1/Python-3.7.1.tar.xz
    at https://www.python.org/downloads/release/python-371/
  • qt : https://download.qt.io/archive/qt/5.11/5.11.1/single/qt-everywhere-src-5.11.1.tar.xz at https://download.qt.io/archive/qt/5.11/5.11.1/single/
  • openssl : https://www.openssl.org/source/openssl-1.1.1.tar.gz at
    https://www.openssl.org/source/
  • zlib : https://zlib.net/zlib-1.2.11.tar.gz at https://zlib.net/
  • sip : https://sourceforge.net/projects/pyqt/files/sip/sip-4.19.13/sip-4.19.13.tar.gz at https://riverbankcomputing.com/software/sip/download
  • PyQt5 : https://sourceforge.net/projects/pyqt/files/PyQt5/PyQt-5.11.3/PyQt5_gpl-5.11.3.tar.gz at https://www.riverbankcomputing.com/software/pyqt/download5
  • PyQt3D : https://sourceforge.net/projects/pyqt/files/PyQt3D/PyQt3D-5.11.3/PyQt3D_gpl-5.11.3.tar.gz at https://www.riverbankcomputing.com/software/pyqt3d/download
  • PyQtChart : https://sourceforge.net/projects/pyqt/files/PyQtChart/PyQtChart-5.11.3/PyQtChart_gpl-5.11.3.tar.gz at https://www.riverbankcomputing.com/software/pyqtchart/download
  • PyQtDataVisualization : https://sourceforge.net/projects/pyqt/files/PyQtDataVisualization/PyQtDataVisualization-5.11.3/PyQtDataVisualization_gpl-5.11.3.tar.gz at https://www.riverbankcomputing.com/software/pyqtdatavisualization/download
  • PyQtPurchasing : https://sourceforge.net/projects/pyqt/files/PyQtPurchasing/PyQtPurchasing-5.11.3/PyQtPurchasing_gpl-5.11.3.tar.gz at
    https://www.riverbankcomputing.com/software/pyqtpurchasing/download
  • QScintilla : https://sourceforge.net/projects/pyqt/files/QScintilla2/QScintilla-2.10.8/QScintilla_gpl-2.10.8.tar.gz at https://www.riverbankcomputing.com/software/qscintilla/download

0

I’m trying to work my way through the pyqtdeploy documentation, trying to build the pyqt-demo project.

My system is an Ubuntu 18.04 (fresh installation, up-to-date)

$ uname -a :

Linux sui 4.15.0-39-generic #42-Ubuntu SMP Tue Oct 23 15:48:01 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux

I’m using pyqtdeploy v. 2.3.

I downloaded every file required by the build(*) but I have a problem with the Qt tarball : I downloaded https://download.qt.io/archive/qt/5.11/5.11.1/single/qt-everywhere-src-5.11.1.tar.xz, not knowing if it was the right file to be used.

… and this is what I got:

$ python3 build-demo.py --verbose --source-dir=[skipped] --installed-qt-dir=[skipped]


[skipped]Creating qmake...

Done.

Info: creating super cache file [skipped]/sysroot-linux-64/build/qt-everywhere-src-5.11.1/.qmake.super

Info: creating stash file [skipped]/demo/sysroot-linux-64/build/qt-everywhere-src-5.11.1/.qmake.stash


Error: Qt license file was not found!

Note: Also available for Linux: linux-clang linux-icc


ERROR: You are not licensed to use this software.

pyqtdeploy-sysroot: Execution failed: returned exit code 3

I’m 100% sure the qt-*.tar.xz file is found since an message appears, saying that the file is unpacked.

I’m obviously missing something important : should I use a file like qt-everywhere-opensource-src-5.11.1.tar.xz although I can’t find such a file ?
Any help would be appreciated !

(*) required tarballs:

  • python : https://www.python.org/ftp/python/3.7.1/Python-3.7.1.tar.xz
    at https://www.python.org/downloads/release/python-371/
  • qt : https://download.qt.io/archive/qt/5.11/5.11.1/single/qt-everywhere-src-5.11.1.tar.xz at https://download.qt.io/archive/qt/5.11/5.11.1/single/
  • openssl : https://www.openssl.org/source/openssl-1.1.1.tar.gz at
    https://www.openssl.org/source/
  • zlib : https://zlib.net/zlib-1.2.11.tar.gz at https://zlib.net/
  • sip : https://sourceforge.net/projects/pyqt/files/sip/sip-4.19.13/sip-4.19.13.tar.gz at https://riverbankcomputing.com/software/sip/download
  • PyQt5 : https://sourceforge.net/projects/pyqt/files/PyQt5/PyQt-5.11.3/PyQt5_gpl-5.11.3.tar.gz at https://www.riverbankcomputing.com/software/pyqt/download5
  • PyQt3D : https://sourceforge.net/projects/pyqt/files/PyQt3D/PyQt3D-5.11.3/PyQt3D_gpl-5.11.3.tar.gz at https://www.riverbankcomputing.com/software/pyqt3d/download
  • PyQtChart : https://sourceforge.net/projects/pyqt/files/PyQtChart/PyQtChart-5.11.3/PyQtChart_gpl-5.11.3.tar.gz at https://www.riverbankcomputing.com/software/pyqtchart/download
  • PyQtDataVisualization : https://sourceforge.net/projects/pyqt/files/PyQtDataVisualization/PyQtDataVisualization-5.11.3/PyQtDataVisualization_gpl-5.11.3.tar.gz at https://www.riverbankcomputing.com/software/pyqtdatavisualization/download
  • PyQtPurchasing : https://sourceforge.net/projects/pyqt/files/PyQtPurchasing/PyQtPurchasing-5.11.3/PyQtPurchasing_gpl-5.11.3.tar.gz at
    https://www.riverbankcomputing.com/software/pyqtpurchasing/download
  • QScintilla : https://sourceforge.net/projects/pyqt/files/QScintilla2/QScintilla-2.10.8/QScintilla_gpl-2.10.8.tar.gz at https://www.riverbankcomputing.com/software/qscintilla/download

I’m trying to work my way through the pyqtdeploy documentation, trying to build the pyqt-demo project.

My system is an Ubuntu 18.04 (fresh installation, up-to-date)

$ uname -a :

Linux sui 4.15.0-39-generic #42-Ubuntu SMP Tue Oct 23 15:48:01 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux

I’m using pyqtdeploy v. 2.3.

I downloaded every file required by the build(*) but I have a problem with the Qt tarball : I downloaded https://download.qt.io/archive/qt/5.11/5.11.1/single/qt-everywhere-src-5.11.1.tar.xz, not knowing if it was the right file to be used.

… and this is what I got:

$ python3 build-demo.py --verbose --source-dir=[skipped] --installed-qt-dir=[skipped]


[skipped]Creating qmake...

Done.

Info: creating super cache file [skipped]/sysroot-linux-64/build/qt-everywhere-src-5.11.1/.qmake.super

Info: creating stash file [skipped]/demo/sysroot-linux-64/build/qt-everywhere-src-5.11.1/.qmake.stash


Error: Qt license file was not found!

Note: Also available for Linux: linux-clang linux-icc


ERROR: You are not licensed to use this software.

pyqtdeploy-sysroot: Execution failed: returned exit code 3

I’m 100% sure the qt-*.tar.xz file is found since an message appears, saying that the file is unpacked.

I’m obviously missing something important : should I use a file like qt-everywhere-opensource-src-5.11.1.tar.xz although I can’t find such a file ?
Any help would be appreciated !

(*) required tarballs:

  • python : https://www.python.org/ftp/python/3.7.1/Python-3.7.1.tar.xz
    at https://www.python.org/downloads/release/python-371/
  • qt : https://download.qt.io/archive/qt/5.11/5.11.1/single/qt-everywhere-src-5.11.1.tar.xz at https://download.qt.io/archive/qt/5.11/5.11.1/single/
  • openssl : https://www.openssl.org/source/openssl-1.1.1.tar.gz at
    https://www.openssl.org/source/
  • zlib : https://zlib.net/zlib-1.2.11.tar.gz at https://zlib.net/
  • sip : https://sourceforge.net/projects/pyqt/files/sip/sip-4.19.13/sip-4.19.13.tar.gz at https://riverbankcomputing.com/software/sip/download
  • PyQt5 : https://sourceforge.net/projects/pyqt/files/PyQt5/PyQt-5.11.3/PyQt5_gpl-5.11.3.tar.gz at https://www.riverbankcomputing.com/software/pyqt/download5
  • PyQt3D : https://sourceforge.net/projects/pyqt/files/PyQt3D/PyQt3D-5.11.3/PyQt3D_gpl-5.11.3.tar.gz at https://www.riverbankcomputing.com/software/pyqt3d/download
  • PyQtChart : https://sourceforge.net/projects/pyqt/files/PyQtChart/PyQtChart-5.11.3/PyQtChart_gpl-5.11.3.tar.gz at https://www.riverbankcomputing.com/software/pyqtchart/download
  • PyQtDataVisualization : https://sourceforge.net/projects/pyqt/files/PyQtDataVisualization/PyQtDataVisualization-5.11.3/PyQtDataVisualization_gpl-5.11.3.tar.gz at https://www.riverbankcomputing.com/software/pyqtdatavisualization/download
  • PyQtPurchasing : https://sourceforge.net/projects/pyqt/files/PyQtPurchasing/PyQtPurchasing-5.11.3/PyQtPurchasing_gpl-5.11.3.tar.gz at
    https://www.riverbankcomputing.com/software/pyqtpurchasing/download
  • QScintilla : https://sourceforge.net/projects/pyqt/files/QScintilla2/QScintilla-2.10.8/QScintilla_gpl-2.10.8.tar.gz at https://www.riverbankcomputing.com/software/qscintilla/download

Fixed since pyqtdeploy-2.3.1.dev1811241346. See here for Phil Thomson’s answer and here to download the last snapshot.

Your Answer

StackExchange.ifUsing(«editor», function () {
StackExchange.using(«externalEditor», function () {
StackExchange.using(«snippets», function () {
StackExchange.snippets.init();
});
});
}, «code-snippets»);

StackExchange.ready(function() {
var channelOptions = {
tags: «».split(» «),
id: «1»
};
initTagRenderer(«».split(» «), «».split(» «), channelOptions);

StackExchange.using(«externalEditor», function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using(«snippets», function() {
createEditor();
});
}
else {
createEditor();
}
});

function createEditor() {
StackExchange.prepareEditor({
heartbeatType: ‘answer’,
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: «»,
imageUploader: {
brandingHtml: «Powered by u003ca class=»icon-imgur-white» href=»https://imgur.com/»u003eu003c/au003e»,
contentPolicyHtml: «User contributions licensed under u003ca href=»https://creativecommons.org/licenses/by-sa/3.0/»u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href=»https://stackoverflow.com/legal/content-policy»u003e(content policy)u003c/au003e»,
allowUrls: true
},
onDemand: true,
discardSelector: «.discard-answer»
,immediatelyShowMarkdownHelp:true
});

}
});

Sign up or log in

StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave(‘#login-link’);
});

Sign up using Email and Password

Post as a guest

Email

Required, but never shown

StackExchange.ready(
function () {
StackExchange.openid.initPostLogin(‘.new-post-login’, ‘https%3a%2f%2fstackoverflow.com%2fquestions%2f53437631%2fpyqtdeploy-qt-license-file-not-found%23new-answer’, ‘question_page’);
}
);

Post as a guest

Email

Required, but never shown

Fixed since pyqtdeploy-2.3.1.dev1811241346. See here for Phil Thomson’s answer and here to download the last snapshot.

Fixed since pyqtdeploy-2.3.1.dev1811241346. See here for Phil Thomson’s answer and here to download the last snapshot.

0

Fixed since pyqtdeploy-2.3.1.dev1811241346. See here for Phil Thomson’s answer and here to download the last snapshot.

Fixed since pyqtdeploy-2.3.1.dev1811241346. See here for Phil Thomson’s answer and here to download the last snapshot.

Thanks for contributing an answer to Stack Overflow!

  • Please be sure to answer the question. Provide details and share your research!

But avoid …

  • Asking for help, clarification, or responding to other answers.
  • Making statements based on opinion; back them up with references or personal experience.

To learn more, see our tips on writing great answers.

Some of your past answers have not been well-received, and you’re in danger of being blocked from answering.

Please pay close attention to the following guidance:

  • Please be sure to answer the question. Provide details and share your research!

But avoid …

  • Asking for help, clarification, or responding to other answers.
  • Making statements based on opinion; back them up with references or personal experience.

To learn more, see our tips on writing great answers.

Sign up or log in

StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave(‘#login-link’);
});

Sign up using Email and Password

Post as a guest

Email

Required, but never shown

StackExchange.ready(
function () {
StackExchange.openid.initPostLogin(‘.new-post-login’, ‘https%3a%2f%2fstackoverflow.com%2fquestions%2f53437631%2fpyqtdeploy-qt-license-file-not-found%23new-answer’, ‘question_page’);
}
);

Post as a guest

Email

Required, but never shown

Sign up or log in

StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave(‘#login-link’);
});

Sign up using Email and Password

Post as a guest

Email

Required, but never shown

Sign up or log in

StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave(‘#login-link’);
});

Sign up using Email and Password

Post as a guest

Email

Required, but never shown

Sign up or log in

StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave(‘#login-link’);
});

Sign up using Email and Password

Sign up using Email and Password

Post as a guest

Email

Required, but never shown

Email

Required, but never shown

Email

Required, but never shown

Email

Required, but never shown

Email

Required, but never shown

Email

Required, but never shown

Email

Required, but never shown

Email

Required, but never shown

Email

Required, but never shown

Я пытаюсь пройти через документация pyqtdeploy, пытаюсь построить pyqt-демонстрационный проект.

Моя система — Ubuntu 18.04 (свежая установка, последняя версия)

$ uname -a :
Linux sui 4.15.0-39-generiC#42-Ubuntu SMP Tue Oct 23 15:48:01 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux

Я использую pyqtdeploy v. 2.3.

Я загрузил все файлы, необходимые для сборки (*), но у меня проблема с архивом Qt: я загрузил https://download.qt.io/archive/qt/5.11/5.11.1/single/qt-everywhere-src-5.11.1.tar.xz, не зная, правильный ли это файл для использования.

… и вот что у меня получилось:

$ python3 build-demo.py --verbose --source-dir=[skipped] --installed-qt-dir=[skipped]

[skipped]Creating qmake...
Done.
Info: creating super cache file [skipped]/sysroot-linux-64/build/qt-everywhere-src-5.11.1/.qmake.super
Info: creating stash file [skipped]/demo/sysroot-linux-64/build/qt-everywhere-src-5.11.1/.qmake.stash

Error: Qt license file was not found!
Note: Also available for Linux: linux-clang linux-icc

ERROR: You are not licensed to use this software.
pyqtdeploy-sysroot: Execution failed: returned exit code 3

Я на 100% уверен, что файл qt — *. Tar.xz найден, поскольку появляется сообщение о том, что файл распакован.

Мне явно не хватает чего-то важного: следует ли мне использовать такой файл, как qt-везде-opensource-src-5.11.1.tar.xz хотя я не могу найти такой файл?
Любая помощь будет оценена по достоинству!

(*) требуемые архивы:

  • питон: https://www.python.org/ftp/python/3.7.1/Python-3.7.1.tar.xz
    в https://www.python.org/downloads/release/python-371/
  • qt: https://download.qt.io/archive/qt/5.11/5.11.1/single/qt-everywhere-src-5.11.1.tar.xz в https://download.qt.io/archive/qt/5.11/5.11.1/single/
  • openssl: https://www.openssl.org/source/openssl-1.1.1.tar.gz в
    https://www.openssl.org/source/
  • zlib: https://zlib.net/zlib-1.2.11.tar.gz в https://zlib.net/
  • sip: https://sourceforge.net/projects/pyqt/files/sip/sip-4.19.13/sip-4.19.13.tar.gz в https://riverbankcomputing.com/software/sip/download
  • PyQt5: https://sourceforge.net/projects/pyqt/files/PyQt5/PyQt-5.11.3/PyQt5_gpl-5.11.3.tar.gz в https://www.riverbankcomputing.com/software/pyqt/download5
  • PyQt3D: https://sourceforge.net/projects/pyqt/files/PyQt3D/PyQt3D-5.11.3/PyQt3D_gpl-5.11.3.tar.gz в https://www.riverbankcomputing.com/software/pyqt3d/download
  • PyQtChart: https://sourceforge.net/projects/pyqt/files/PyQtChart/PyQtChart-5.11.3/PyQtChart_gpl-5.11.3.tar.gz в https://www.riverbankcomputing.com/software/pyqtchart/download
  • PyQtDataVisualization: https://sourceforge.net/projects/pyqt/files/PyQtDataVisualization/PyQtDataVisualization-5.11.3/PyQtDataVisualization_gpl-5.11.3.tar.gz при https://www.riverbankcomputing.com/software/pyqtdatavisualization/download
  • PyQtPurchasing: https://sourceforge.net/projects/pyqt/files/PyQtPurchasing/PyQtPurchasing-5.11.3/PyQtPurchasing_gpl-5.11.3.tar.gz в
    https://www.riverbankcomputing.com/software/pyqtpurchasing/download
  • QScintilla: https://sourceforge.net/projects/pyqt/files/QScintilla2/QScintilla-2.10.8/QScintilla_gpl-2.10.8.tar.gz в https://www.riverbankcomputing.com/software/qscintilla/download

Last Updated: 07/04/2022
[Average Read Time: 4.5 minutes]

Plain Text files, such as qt-license.txt, are considered a type of M2T (Plain Text) file. They are associated with the TXT file extension, developed by A.V.M. Software for Paltalk 1.13.83.

The first version of qt-license.txt for Paltalk 1.13.83 was seen on 04/15/2019 in Windows 10.

According to our records, this is the primary and most recent file release from A.V.M. Software.

In this short article, you will discover detailed file information, steps for troubleshooting TXT file problems with qt-license.txt, and list of free downloads for every version that exists in our comprehensive file directory.

What are qt-license.txt Error Messages?

General qt-license.txt Runtime Errors

Qt-license.txt file errors often occur during the startup phase of Paltalk, but can also occur while the program is running.
These types TXT errors are also known as “runtime errors” because they occur while Paltalk is running. Here are some of the most common qt-license.txt runtime errors:

  • qt-license.txt could not be found.
  • qt-license.txt error.
  • qt-license.txt failed to load.
  • Error loading qt-license.txt.
  • Failed to register qt-license.txt / Cannot register qt-license.txt.
  • Runtime Error — qt-license.txt.
  • The file qt-license.txt is missing or corrupt.

Microsoft Visual C++ Runtime Library

Runtime Error!

Program: C:Program Files (x86)Paltalklicensesqt-license.txt

This application has requested the Runtime to terminate it in an unusual way.
Please contact the application’s support team for more information.

Most TXT errors are due to missing or corrupt files. Your qt-license.txt file could be missing due to accidental deletion, uninstalled as a shared file of another program (shared with Paltalk), or deleted by a malware infection. Furthermore, qt-license.txt file corruption could be caused from a power outage when loading Paltalk, system crash while loading or saving qt-license.txt, bad sectors on your storage media (usually your primary hard drive), or malware infection. Thus, it’s critical to make sure your anti-virus is kept up-to-date and scanning regularly.

How to Fix qt-license.txt Errors in 3 Steps (Time to complete: ~5-15 minutes)

If you’re encountering one of the error messages above, follow these troubleshooting steps to resolve your qt-license.txt issue. These troubleshooting steps are listed in the recommended order of execution.

Step 1: Restore your PC back to the latest restore point, «snapshot», or backup image before error occurred.

To begin System Restore (Windows XP, Vista, 7, 8, and 10):

  1. Hit the Windows Start button
  2. When you see the search box, type «System Restore» and press «ENTER«.
  3. In the search results, find and click System Restore.
  4. Please enter the administrator password (if applicable / prompted).
  5. Follow the steps in the System Restore Wizard to choose a relevant restore point.
  6. Restore your computer to that backup image.

If the Step 1 fails to resolve the qt-license.txt error, please proceed to the Step 2 below.

Step 2: If recently installed Paltalk (or related software), uninstall then try reinstalling Paltalk software.

You can uninstall Paltalk software by following these instructions (Windows XP, Vista, 7, 8, and 10):

  1. Hit the Windows Start button
  2. In the search box, type «Uninstall» and press «ENTER«.
  3. In the search results, find and click «Add or Remove Programs«
  4. Find the entry for Paltalk 1.13.83 and click «Uninstall«
  5. Follow the prompts for uninstallation.

After the software has been fully uninstalled, restart your PC and reinstall Paltalk software.

If this Step 2 fails as well, please proceed to the Step 3 below.

Paltalk 1.13.83

A.V.M. Software

Step 3: Perform a Windows Update.

When the first two steps haven’t solved your issue, it might be a good idea to run Windows Update. Many qt-license.txt error messages that are encountered can be contributed to an outdated Windows Operating System. To run Windows Update, please follow these easy steps:

  1. Hit the Windows Start button
  2. In the search box, type «Update» and press «ENTER«.
  3. In the Windows Update dialog box, click «Check for Updates» (or similar button depending on your Windows version)
  4. If updates are available for download, click «Install Updates«.
  5. After the update is completed, restart your PC.

If Windows Update failed to resolve the qt-license.txt error message, please proceed to next step. Please note that this final step is recommended for advanced PC users only.

If Those Steps Fail: Download and Replace Your qt-license.txt File (Caution: Advanced)

If none of the previous three troubleshooting steps have resolved your issue, you can try a more aggressive approach (Note: Not recommended for amateur PC users) by downloading and replacing your appropriate qt-license.txt file version. We maintain a comprehensive database of 100% malware-free qt-license.txt files for every applicable version of Paltalk. Please follow the steps below to download and properly replace you file:

  1. Locate your Windows operating system version in the list of below «Download qt-license.txt Files».
  2. Click the appropriate «Download Now» button and download your Windows file version.
  3. Copy this file to the appropriate Paltalk folder location:

    Windows 10: C:Program Files (x86)Paltalklicenses

  4. Restart your computer.

If this final step has failed and you’re still encountering the error, you’re only remaining option is to do a clean installation of Windows 10.

GEEK TIP : We must emphasize that reinstalling Windows will be a very time-consuming and advanced task to resolve qt-license.txt problems. To avoid data loss, you must be sure that you have backed-up all of your important documents, pictures, software installers, and other personal data before beginning the process. If you are not currently backing up your data, you need to do so immediately.

Download qt-license.txt Files (Malware-Tested 100% Clean)

CAUTION : We strongly advise against downloading and copying qt-license.txt to your appropriate Windows system directory. A.V.M. Software typically does not release Paltalk TXT files for download because they are bundled together inside of a software installer. The installer’s task is to ensure that all correct verifications have been made before installing and placing qt-license.txt and all other TXT files for Paltalk. An incorrectly installed TXT file may create system instability and could cause your program or operating system to stop functioning altogether. Proceed with caution.

Other Files Related to qt-license.txt

File Name Description Software Program (Version) File Size (bytes) File Location
CBS.log Log Paltalk 1.13.83 26352 C:WindowsLogsCBS
setupact.log Log Paltalk 1.13.83 62521 C:WindowsPantherUnattendGC
api-ms-win-core-heap-l… ApiSet Stub DLL Microsoft® Windows® Operating System (10.0.17134.12) 18248 C:UsersTesterAppDataLocalMicrosoftOneDriv…
diagwrn.xml Extensible Markup Language Paltalk 1.13.83 44683 C:WindowsPantherUnattendGC
api-ms-win-core-synch-… ApiSet Stub DLL Microsoft® Windows® Operating System (10.0.17134.12) 20320 C:UsersTesterAppDataLocalMicrosoftOneDriv…

You are downloading trial software. The purchase of a one-year software subscription at the price of $39.95 USD is required to unlock all software features. Subscription auto-renews at the end of the term (Learn more). By clicking the «Start Download» button above and installing «Software», I acknowledge I have read and agree to the Solvusoft End User License Agreement and Privacy Policy.

Источник

Понравилась статья? Поделить с друзьями:
  • 0хс000014с как исправить windows 10 ошибка
  • 10 ошибок при составлении презентации
  • 0хс000005 ошибка как исправить
  • 0хс00000225 код ошибки
  • 10 ошибок при покупке генератора